1
|
Du M, Xu Z, Xue Y, Li F, Bi J, Liu J, Wang S, Guo X, Zhang P, Yuan J. Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater. Molecules 2024; 29:3160. [PMID: 38999112 PMCID: PMC11243660 DOI: 10.3390/molecules29133160] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2024] [Revised: 06/14/2024] [Accepted: 06/19/2024] [Indexed: 07/14/2024] Open
Abstract
With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.
Collapse
Affiliation(s)
- Mengzhen Du
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
| | - Zihao Xu
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
| | - Yingru Xue
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
| | - Fei Li
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Jingtao Bi
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Jie Liu
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Shizhao Wang
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Xiaofu Guo
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Panpan Zhang
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| | - Junsheng Yuan
- Engineering Research Center of Seawater Utilization Technology of Ministry of Education, School of Chemical Engineering, Hebei University of Technology, Tianjin 300401, China; (M.D.); (Z.X.); (Y.X.); (J.B.); (J.L.); (S.W.); (X.G.); (P.Z.); (J.Y.)
- Hebei Collaborative Innovation Center of Modern Marine Chemical Technology, Tianjin 300401, China
| |
Collapse
|
2
|
Shen Y, Miao P, Liu S, Gao J, Han X, Zhao Y, Chen T. Preparation and Application Progress of Imprinted Polymers. Polymers (Basel) 2023; 15:polym15102344. [PMID: 37242918 DOI: 10.3390/polym15102344] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2023] [Revised: 05/11/2023] [Accepted: 05/14/2023] [Indexed: 05/28/2023] Open
Abstract
Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.
Collapse
Affiliation(s)
- Yongsheng Shen
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| | - Pengpai Miao
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| | - Shucheng Liu
- Institute of Forensic Science, Hunan Provincial Public Security Bureau, Changsha 410001, China
| | - Jie Gao
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| | - Xiaobing Han
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| | - Yuan Zhao
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| | - Tao Chen
- Hubei Key Laboratory of Radiation Chemistry and Functional Materials, School of Pharmacy, School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China
| |
Collapse
|
3
|
Bao Y, Zhao Y, Qin G, Wang J, Li K, Zhu X. Histidine-mediated dendritic mesoporous magnetic ion-imprinted polymer toward effective and recoverable cadmium removal. Colloids Surf A Physicochem Eng Asp 2023. [DOI: 10.1016/j.colsurfa.2022.130365] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
4
|
Islam A, Chauhan A. Tailored-designed material for the preconcentration of Cd(II) on glycidyl methacrylate-based ion-imprinted polymer for flame atomic absorption for trace determination in real samples: multivariate optimization. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:69068-69081. [PMID: 35554830 DOI: 10.1007/s11356-022-20558-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2022] [Accepted: 04/27/2022] [Indexed: 06/15/2023]
Abstract
A new Cd(II)-imprinting polymer was synthesised based on glycidyl methacrylate (Fe3O4@GMA@IIP) and employed to develop a dispersive magnetic solid-phase extraction method for the preconcentration prior to the determination of Cd(II) from the environmental samples. A central composite design (CCD) based on response surface methodology was used for optimization of the process variables and the material shows the promising saturation adsorption capacity of 28.21 mg g-1 under the optimum pH of 4.9 within 15.2 min at saturation concentration 914 μg mL-1. The experimental data were well described by Sips isotherm model and Brouers-Sotolongo fractal kinetic model that indicated the surface heterogeneity and involvement of both chemisorption and physisorption process. Thermodynamic results documented the endothermic and spontaneous nature of adsorption. The sorbent manifest the economic feasibility maintaining its sorption efficiency after the regeneration by 1 M HNO3 and reusability up to 6 adsorption/desorption cycles. The developed method exhibited the preconcentration factor of 30 and a high degree of tolerance for matrix ions. Limit of detection (LOD) and quantification (LOQ) were calculated as 3.054 and 10.182 μg L-1 respectively. The developed method was validated by the standard reference material and spiking addition method in real samples, and obtained results showed good agreement in accordance with spiking values. The ease of magnetic separation, high selectivity, good adsorption capacity and faster kinetics made this material a promising candidate for Cd(II) determination in various food and aqueous samples.
Collapse
Affiliation(s)
- Aminul Islam
- Analytical Research Laboratory, Department of Chemistry, Aligarh Muslim University, Aligarh, India, 202002.
| | - Anjali Chauhan
- Analytical Research Laboratory, Department of Chemistry, Aligarh Muslim University, Aligarh, India, 202002
| |
Collapse
|
5
|
Minaberry YS, Costa C, Diz V, Tudino M. An ion imprinted magnetic organosilica nanocomposite for the selective determination of traces of Cd(II) in a minicolumn flow-through preconcentration system coupled with graphite furnace atomic absorption spectroscopy. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2022; 14:2920-2928. [PMID: 35861161 DOI: 10.1039/d2ay00804a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
In this paper we present the determination of ultratraces of cadmium ions in water by means of a minicolumn (MC) flow-through preconcentration system coupled with graphite furnace atomic absorption spectrometry. The core of the system is a lab-made ion imprinted magnetic organosilica nanocomposite which is employed as filler of the MC for the selective retention of the analyte. In this case superparamagnetic magnetite nanoparticles were coated with an amine-functionalized shell and ion imprinted with Cd(II) by a simple sol-gel co-condensation method. The setup was completed with the inclusion of a magnet fixed around the packed MC. This assembly - which is studied with an MII material for the first time here - allowed a homogeneous distribution of the solid on the walls of the MC, leaving a hole in the center and enabling the absence of material bleeding or obstructions to the free movement of fluids. Ion imprinted (MII) and non-imprinted (MNI) materials were studied for comparison purposes. Both were characterized and compared by DRX, FTIR, and SEM and their magnetic behavior by magnetization curves. Batch experiments showed an equilibration time of less than 10 minutes and a maximum adsorption pH of around 7 for both solids. The maximum capacity for MII was greater than that of MNI (200 mg g-1 and 30 mg g-1 respectively) and thus, the former was chosen for analytical purposes. Under MC dynamic conditions, sample and elution flow rates, volumes of the sample and eluant, and type and concentration of the most suitable eluant have been thoroughly investigated and optimized. Under the optimal experimental conditions, the MII filler showed a preconcentration factor of 200, a limit of detection of 0.64 ng L-1, a linear range of 2.5-100 ng L-1, RSD% of 1.9 (n = 6; 10 ng L-1) and a lifetime of more than 800 cycles of concentration-elution with no loss of sensitivity or need for refilling. The effect of potentially interfering ions on the percent recovery of cadmium was also studied. The proposed method was successfully applied to the determination of traces of Cd(II) in osmosis and tap water with recoveries of 98.0-101.3%. A comparison with similar methods is also provided.
Collapse
Affiliation(s)
- Yanina Susana Minaberry
- Laboratorio de Trazas, Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. II, C1428EHA, Buenos Aires, Argentina.
| | - Cecilia Costa
- Departamento de Química Inorgánica, Analítica y Química Física,, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. II, C1428EHA, Buenos Aires, Argentina
| | - Virginia Diz
- Departamento de Química Inorgánica, Analítica y Química Física,, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. II, C1428EHA, Buenos Aires, Argentina
| | - Mabel Tudino
- Laboratorio de Trazas, Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. II, C1428EHA, Buenos Aires, Argentina.
| |
Collapse
|
6
|
Hashami ZS, Taheri A, Alikarami M. Synthesis of a magnetic SBA-15-NH 2@Dual-Template Imprinted Polymer for solid phase extraction and determination of Pb and Cd in vegetables; Box Behnken design. Anal Chim Acta 2022; 1204:339262. [PMID: 35397913 DOI: 10.1016/j.aca.2021.339262] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2021] [Revised: 10/24/2021] [Accepted: 11/06/2021] [Indexed: 11/28/2022]
Abstract
In this study, a simple one-step method was applied for extraction and determination of lead and cadmium. The significant variables in extraction and pre-concentration were identified using analysis of variance and their behavior was modeled. Dual-template imprinted polymer was synthesized on modified Mesoporous silica structures coated with Fe3O4 magnetic nanoparticles. The optimum condition was 6.12 for pH, 40.62 mg for the polymer amount and 17.38 for the ultrasonic time. Concentration range, correlation coefficient, limit of detection and relative standard deviation for lead were reported to be 0.5-950, 0.9988, 0.35 μg L-1 and 3.5%, respectively. For cadmium the above mentioned figure of merits were 0.3-980, 0.9969, 0.15 μg L-1 and 2.4%, respectively. The adsorption capacities for lead and cadmium were reported to be 10.28 and 10.38, while their imprinting factors were 5.89 and 6.36, respectively.
Collapse
Affiliation(s)
| | - Alireza Taheri
- Department of Chemistry, Ilam Branch, Islamic Azad University, Ilam, Iran.
| | - Mohammad Alikarami
- Department of Chemistry, Ilam Branch, Islamic Azad University, Ilam, Iran
| |
Collapse
|
7
|
Yu JX, Li HX, Zhou RY, Li XD, Wu HJ, Xiao CQ, Chi RA. Surface ion imprinted bagasse for selective removal of Cu (II) from the leaching solution of electroplating sludge. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.128394] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
8
|
|
9
|
Kasiri E, Arabkhani P, Haddadi H, Asfaram A, Varma RS. A silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer for the selective aqueous decontamination of heavy metal ions. NEW J CHEM 2022. [DOI: 10.1039/d2nj04105g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
A novel adsorbent comprising a silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer is introduced as an ideal candidate for the simultaneous and selective adsorptive remediation of heavy metal ions from contaminated water.
Collapse
Affiliation(s)
- Elahe Kasiri
- Department of Chemistry, Faculty of Sciences, Shahrekord University, P.O. Box 115, Shahrekord, Iran
| | - Payam Arabkhani
- Medicinal Plants Research Center, Yasuj University of Medical Sciences, Yasuj, Iran
| | - Hedayat Haddadi
- Department of Chemistry, Faculty of Sciences, Shahrekord University, P.O. Box 115, Shahrekord, Iran
| | - Arash Asfaram
- Medicinal Plants Research Center, Yasuj University of Medical Sciences, Yasuj, Iran
| | - Rajender S. Varma
- Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute, Palacky University, Šlechtitelů 27, 783 71 Olomouc, Czech Republic
| |
Collapse
|
10
|
Jakavula S, Biata NR, Dimpe KM, Pakade VE, Nomngongo PN. Magnetic Ion Imprinted Polymers (MIIPs) for Selective Extraction and Preconcentration of Sb(III) from Environmental Matrices. Polymers (Basel) 2021; 14:21. [PMID: 35012044 PMCID: PMC8747241 DOI: 10.3390/polym14010021] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2021] [Revised: 12/14/2021] [Accepted: 12/15/2021] [Indexed: 12/15/2022] Open
Abstract
Antimony(III) is a rare element whose chemical and toxicological properties bear a resemblance to those of arsenic. As a result, the presence of Sb(III) in water might have adverse effects on human health and aquatic life. However, Sb(III) exists at very ultra-trace levels which may be difficult for direct quantification. Therefore, there is a need to develop efficient and reliable selective extraction and preconcentration of Sb(III) in water systems. Herein, a selective extraction and preconcentration of trace Sb(III) from environmental samples was achieved using ultrasound assisted magnetic solid-phase extraction (UA-MSPE) based on magnetic Sb(III) ion imprinted polymer-Fe3O4@SiO2@CNFs nanocomposite as an adsorbent. The amount of antimony in samples was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The UA-MSPE conditions were investigated using fractional factorial design and response surface methodology based on central composite design. The Sb(III)-IIP sorbent displayed excellent selectivity towards Sb(III) as compared to NIIP adsorbent. Under optimised conditions, the enrichment factor, limit of detection (LOD) and limit of quantification (LOQ) of UA-MSPE/ICP-OES for Sb(III) were 71.3, 0.13 µg L-1 and 0.44 µg L-1, respectively. The intra-day and inter-day precision expressed as relative standard deviations (%RSDs, n = 10 and n = 5) were 2.4 and 4.7, respectively. The proposed analytical method was applied in the determination of trace Sb(III) in environmental samples. Furthermore, the accuracy of the method was evaluated using spiked recovery experiments and the percentage recoveries ranged from 95-98.3%.
Collapse
Affiliation(s)
- Silindokuhle Jakavula
- Department of Chemical Sciences, Doornfontein Campus, University of Johannesburg, Doornfontein 2028, South Africa; (S.J.); (N.R.B.); (K.M.D.)
- Department of Science and Innovation-National Research Foundation South African Research Chair Initiative (DSI-NRF SARChI), Nanotechnology for Water, University of Johannesburg, Doornfontein 2028, South Africa
| | - Nkositetile Raphael Biata
- Department of Chemical Sciences, Doornfontein Campus, University of Johannesburg, Doornfontein 2028, South Africa; (S.J.); (N.R.B.); (K.M.D.)
- Department of Science and Innovation-National Research Foundation South African Research Chair Initiative (DSI-NRF SARChI), Nanotechnology for Water, University of Johannesburg, Doornfontein 2028, South Africa
| | - Kgogobi M. Dimpe
- Department of Chemical Sciences, Doornfontein Campus, University of Johannesburg, Doornfontein 2028, South Africa; (S.J.); (N.R.B.); (K.M.D.)
| | - Vusumzi Emmanuel Pakade
- Department of Chemistry, Vaal University of Technology, Private Bag X 021, Vanderbijlpark 1911, South Africa;
| | - Philiswa Nosizo Nomngongo
- Department of Chemical Sciences, Doornfontein Campus, University of Johannesburg, Doornfontein 2028, South Africa; (S.J.); (N.R.B.); (K.M.D.)
- Department of Science and Innovation-National Research Foundation South African Research Chair Initiative (DSI-NRF SARChI), Nanotechnology for Water, University of Johannesburg, Doornfontein 2028, South Africa
| |
Collapse
|
11
|
Cao H, Yang P, Ye T, Yuan M, Yu J, Wu X, Yin F, Li Y, Xu F. The selective recognition mechanism of a novel highly hydrophobic ion-imprinted polymer towards Cd(ii) and its application in edible vegetable oil. RSC Adv 2021; 11:34487-34497. [PMID: 35494786 PMCID: PMC9042718 DOI: 10.1039/d1ra04132k] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2021] [Accepted: 09/09/2021] [Indexed: 12/28/2022] Open
Abstract
Edible vegetable oils are easily contaminated by heavy metals, resulting in the oxidative degradation of oils and various health effects on humans. Therefore, it is very important to develop a rapid and efficient method to extract trace heavy metals from vegetable oils. In this work, a highly hydrophobic ion-imprinted polymer (IIP) was synthesized on a novel raspberry (RS)-like particle surface. The synthesized IIP@RS was characterized and used in solid-phase extraction (SPE) for the selective and fast adsorption of Cd(ii) from vegetable oils. The results showed that IIP was successfully coated onto RS particles with a high specific surface area (458.7 m2 g−1) and uniform porous structure. The contact angle (θ) value (141.8°) of IIP@RS was close to the critical value of super-hydrophobic materials, which is beneficial to their adsorption in hydrophobic vegetable oils. The IIP@RS also exhibited excellent adsorption ability and selectivity to Cd(ii) with a maximum adsorption capacity of 36.62 mg g−1, imprinting factor of 4.31 and equilibrium adsorption rate of 30 min. According to isothermal titration calorimetry results, the recognition behavior of IIP@RS for Cd(ii) was mainly contributed by Cd(ii)-induced cavities during gel formation and coordination between Cd(ii) and –SH groups in imprinted cavities. Furthermore, the adsorption process driven by entropy and enthalpy was spontaneous at all temperatures. In real vegetable oil samples, IIP@RS-SPE adsorbed approximately 96.5–115.8% of Cd(ii) with a detection limit of 0.62 μg L−1. Therefore, IIP@RS has wide application prospects in enriching and detecting Cd(ii) from vegetable oil. Edible vegetable oils are easily contaminated by heavy metals, resulting in the oxidative degradation of oils and various health effects on humans.![]()
Collapse
Affiliation(s)
- Hui Cao
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Pu Yang
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Tai Ye
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Min Yuan
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Jinsong Yu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Xiuxiu Wu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Fengqin Yin
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Yan Li
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| | - Fei Xu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology P. O. Box 454, No. 516, Jungong Road Shanghai 200093 P. R. China +86-21-55271117 +86-21-55271117
| |
Collapse
|
12
|
Cao H, Yang P, Ye T, Yuan M, Yu J, Wu X, Yin F, Li Y, Xu F. Recognizing adsorption of Cd(Ⅱ) by a novel core-shell mesoporous ion-imprinted polymer: Characterization, binding mechanism and practical application. CHEMOSPHERE 2021; 278:130369. [PMID: 33831680 DOI: 10.1016/j.chemosphere.2021.130369] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/26/2020] [Revised: 03/15/2021] [Accepted: 03/21/2021] [Indexed: 06/12/2023]
Abstract
A novel monodispersed Cd(II) ion-imprinted polymer (IIP) was synthesized inside core-shell mesoporous silica (C-SMS) particles to improve the diffusion kinetics of the polymer. The synthesized IIP@C-SMS was characterized and subsequently used in solid-phase extraction (SPE) for the selective adsorption of Cd(II) in aquatic samples. The results indicated that IIP had been successfully assembled inside the C-SMS particles with a high specific surface area (546.3 m2 g-1) and uniform mesoporous size (2.07 nm). The obtained IIP@C-SMS takes only 15 min to reach the adsorption equilibrium due to the highly developed mesoporous structure. IIP@C-SMS also presented a maximal adsorption capacity (201.9 μmol g-1) for Cd(II), which was much higher than that of NIP@C-SMS (80.3 μmol g-1). The relative selectivity coefficient of IIP@C-SMS for Cd(II)/M(II) (M = Cu(II), Pb(II), Cr(II), and Ni(II)) were 7.15, 8.70, 7.18, and 7.36, respectively, further confirming the satisfactory selectivity of IIP@C-SMS. The adsorption isotherms of IIP@C-SMS toward Cd(II) could be described by Langmuir model; whereas the adsorption kinetics could be fitted by the pseudo-second-order model, indicating chemisorption was the rate-limiting step. The FT-IR, ITC and XPS analysis further confirmed that the Cd(II)-induced cavities during the ion-imprinting process and the coordination between Cd(II) and -SH groups were the main adsorption mechanism. Furthermore, in real samples, IIP@C-SMS-SPE adsorbed approximately 93-104% of Cd(II). This work provides new insights for the design of novel macroporous sorbents for Cd(II).
Collapse
Affiliation(s)
- Hui Cao
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Pu Yang
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Tai Ye
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Min Yuan
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Jinsong Yu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Xiuxiu Wu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Fengqin Yin
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Yan Li
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China
| | - Fei Xu
- School of Medical Instrument and Food Engineering, Shanghai Engineering Research Center for Food Rapid Detection, University of Shanghai for Science and Technology, P.O. Box 454, No. 516, Jungong Road, Shanghai, 200093, PR China.
| |
Collapse
|
13
|
Novel Cd(II) methacrylate monomer complex with 1-vinylimidazole: Synthesis, characterization and ion imprinted polymer applications. Polyhedron 2021. [DOI: 10.1016/j.poly.2021.115322] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|
14
|
Zhu F, Li L, Li N, Liu W, Liu X, He S. Selective solid phase extraction and preconcentration of Cd(II) in the solution using microwave-assisted inverse emulsion-suspension Cd(II) ion imprinted polymer. Microchem J 2021. [DOI: 10.1016/j.microc.2021.106060] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
15
|
Hu B, Wu L, Ou M, Wang X, Tang Y. Sorption Studies of Chromium(VI) onto Cerium/Ferroferric Oxide Composites. J Inorg Organomet Polym Mater 2021. [DOI: 10.1007/s10904-021-01944-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
16
|
Huang L, Wang L, Gong L, Xie Q, Chen N. Preparation, characterization and adsorption characteristics of diatom-based Cd(II) surface ion-imprinted polymer. J DISPER SCI TECHNOL 2020. [DOI: 10.1080/01932691.2020.1857260] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
Affiliation(s)
- Lili Huang
- School of Environmental Science and Engineering, Guilin University of Technology, Guilin Guangxi, PR China
| | - Lanqing Wang
- School of Environmental Science and Engineering, Guilin University of Technology, Guilin Guangxi, PR China
| | - Liang Gong
- School of Environmental Science and Engineering, Guilin University of Technology, Guilin Guangxi, PR China
| | - Qinglin Xie
- School of Environmental Science and Engineering, Guilin University of Technology, Guilin Guangxi, PR China
- Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin Guangxi, PR China
| | - Nanchun Chen
- School of Materials Science and Engineering, Guilin University of Technology, Guilin Guangxi, PR China
| |
Collapse
|
17
|
Jagirani MS, Balouch A, Mahesar SA, Kumar A, Baloch AR, Abdullah., Bhanger MI. Fabrication of cadmium tagged novel ion imprinted polymer for detoxification of the toxic Cd2+ion from aqueous environment. Microchem J 2020. [DOI: 10.1016/j.microc.2020.105247] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
18
|
Din SU, Azeez A, Zain-ul-Abdin, Haq S, Hafeez M, Imran M, Hussain S, Alarfaji SS. Investigation on Cadmium Ions Removal from Water by a Nanomagnetite Based Biochar Derived from Eleocharis Dulcis. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01758-5] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
19
|
Hamdy A, Ismail SH, Ebnalwaled AA, Mohamed GG. Characterization of Superparamagnetic/Monodisperse PEG-Coated Magnetite Nanoparticles Sonochemically Prepared from the Hematite Ore for Cd(II) Removal from Aqueous Solutions. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01741-0] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
20
|
Applications of Chitosan in Molecularly and Ion Imprinted Polymers. CHEMISTRY AFRICA-A JOURNAL OF THE TUNISIAN CHEMICAL SOCIETY 2020. [DOI: 10.1007/s42250-020-00177-w] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
21
|
Miao Y, Zhang H, Xie Q, Chen N, Ma L. Construction and selective removal of Cd ion based on diatom-based Cd (II) ion-imprinted composite adsorbent. Colloids Surf A Physicochem Eng Asp 2020. [DOI: 10.1016/j.colsurfa.2020.124856] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
22
|
Composite Polymeric Cryogel Cartridges for Selective Removal of Cadmium Ions from Aqueous Solutions. Polymers (Basel) 2020; 12:polym12051149. [PMID: 32443399 PMCID: PMC7284788 DOI: 10.3390/polym12051149] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2020] [Revised: 05/08/2020] [Accepted: 05/14/2020] [Indexed: 02/02/2023] Open
Abstract
In this study, composite polymeric cryogel cartridges were achieved by using Cd(II) imprinted poly(hydroxyethyl methacrylate N-methacryloly-(L)-cysteine methylester) beads and poly(hydroxyethyl methacrylate) cryogel cartridges with two different mole ratios of functional monomer. The N-methacryloly-(L)-cysteinemethylester was used as a functional monomer and Cd(II) 1:1 and 2:1, which were then notated as MIP1 and MIP2, respectively. Various characterization methods have confirmed the structural transformation on the MIP1 and MIP2 composite cryogel cartridges by scanning electron microscopy, Fourier-transform infrared spectroscopy-Attenuated Total Reflectance, and swelling tests. The maximum amount of Cd(II) adsorption with composite cryogel cartridges was determined by altering the Cd(II) initial concentration, temperature, and pH values. The maximum adsorption capacity of MIP1 and MIP2 composite cryogel cartridges obtained was 76.35 and 98.8 µmol/g of composite cryogels, respectively. The adsorption studies revealed that the MIP2 possessed a good adsorption performance for Cd(II). The obtained composite cryogel cartridges have a selective, reusable, and cost-friendly potential for the removal of Cd(II) from aqueous solutions, and are used many times without decreasing their adsorption capacities significantly. The Cd(II) removal rate of the MIP1 and MIP2 composite cryogel cartridges from synthetic wastewater samples was determined as 98.8%. The obtained cryogel cartridges’ adsorption material exhibited a good directional removal performance for Cd(II) from wastewater samples.
Collapse
|
23
|
Mohammadi SZ, Safari Z, Madady N. Synthesis of Co3O4@SiO2 Core/Shell–Nylon 6 Magnetic Nanocomposite as an Adsorbent for Removal of Congo Red from Wastewater. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01485-x] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
24
|
Alizadeh T, Sharifi AR, Ganjali MR. A new bio-compatible Cd2+-selective nanostructured fluorescent imprinted polymer for cadmium ion sensing in aqueous media and its application in bio imaging in Vero cells. RSC Adv 2020; 10:4110-4117. [PMID: 35492647 PMCID: PMC9048730 DOI: 10.1039/c9ra06910k] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2019] [Accepted: 12/21/2019] [Indexed: 11/21/2022] Open
Abstract
Schematic representation of Cd2+ recognition by the imprinted polymer and fluorescence signal creation as a result of the mentioned recognition process.
Collapse
Affiliation(s)
- Taher Alizadeh
- Department of Analytical Chemistry
- Faculty of Chemistry
- University College of Science
- University of Tehran
- Tehran
| | - Amir Reza Sharifi
- Department of Analytical Chemistry
- Faculty of Chemistry
- University College of Science
- University of Tehran
- Tehran
| | - Mohammad Reza Ganjali
- Department of Analytical Chemistry
- Faculty of Chemistry
- University College of Science
- University of Tehran
- Tehran
| |
Collapse
|
25
|
Application of β-Cyclodextrin-Modified/PVDF Blend Magnetic Membranes for Direct Metal Ions Removal from Wastewater. J Inorg Organomet Polym Mater 2019. [DOI: 10.1007/s10904-019-01416-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|