Magnetized Activated Carbon Prepared by Oak Shell Biowaste and Modified with Nickel Hexacyanoferrate for Selective Removal of Cesium

A Critical Review of the Removal of Radionuclides from Wastewater Employing Activated Carbon as an Adsorbent

Radionuclide-contaminated water is carcinogenic and poses numerous severe health risks and environmental dangers. The activated carbon (AC)-based adsorption technique has great potential for treating radionuclide-contaminated water due to its simple design, high efficiency, wide pH range, quickness, low cost and environmental friendliness. This critical review first provides a brief overview of the concerned radionuclides with their associated health hazards as well as different removal techniques and their efficacy of removing them. Following this overview, this study summarizes the surface characteristics and adsorption capabilities of AC derived from different biomass precursors. It compares the adsorption performance of AC to other adsorbents, such as zeolite, graphene, carbon nano-tubes and metal-organic frameworks. Furthermore, this study highlights the different factors that influence the physical characteristics of AC and adsorption capacity, including contact time, solution pH, initial concentration of radionuclides, the initial dosage of the adsorbent, and adsorption temperature. The theoretical models of adsorption isotherm and kinetics, along with their fitting parameter values for AC/radionuclide pairs, are also reviewed. Finally, the modification procedures of pristine AC, factors determining AC characteristics and the impact of modifying agents on the adsorption ability of AC are elucidated in this study; therefore, further research and development can be promoted for designing a highly efficient and practical adsorption-based radionuclide removal system.

Influence of sorption parameters on cesium-137 removal using modified activated carbon obtained from corchorus olitorius stalks

Removal of 137Cs radionuclides from the environment has engrossed the concern of researchers after Fukushima accident. The leakage of radioactive cesium ions can lead up to surface and groundwater contamination, and this leads to pollution of drinking water sources. In this work, corchorus olitorius stalks has been used as a novel precursor for production of low-cost meso porous a ctivated c arbon ( Meso-AC ) and HNO3/H2O2- m odified Meso-AC ( m-Meso-AC ). The physicochemical properties of all adsorbents were evaluated. The influences of sorption parameters and presence of some ligands (humic acid, fulvic acid, and EDTA) on the sorption of 137Cs were studied. The maximum 137Cs capacity of m-Meso-AC was found to be 58.74 mg/g. Efficiency of the new adsorbent to remove 137Cs radionuclides from natural waters (tap, river, and groundwater) was investigated. The studies showed that new adsorbent could be used as promising material for the retention of 137Cs from real radioactive waste and natural water samples.