Investigation of the Interactions in Complexes of Low Molecular Weight Chitosan with Ibuprofen

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the "deep eutectic" region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions. There is also very limited understanding of how parent compounds' physicochemical properties could impact upon the formation, interaction mechanism, and stability of the formed liquid systems, despite the significance of these information in dose adjustment, industrial handling, and scaling-up of these liquids. In the current work, we probed the "deep eutectic" phenomenon by investigating the formation and physicochemical behaviours of some chosen lidocaine-NSAID systems across a wide range of composition ratios. Our data revealed that successfully formed THEDES exhibited composition dependent Tg variations with strong positive deviations from predicted Tg values using the Gordon-Taylor theory, suggesting substantial interactions within the formed supramolecular structure. Interestingly, it was found that the parent compound's glass forming ability had a noticeable impact upon such profound interaction and hence could dictate the success of THEDES formation. It has also been confirmed that all successful systems were formed based on charge-assisted hydrogen bonding within their THEDES network, affirming the significant role of partial protonisation on achieving a profound melting point depression. More importantly, the work found that within the "deep eutectic" region there was still an ideal, or thermodynamically preferrable "THEDES point", which would exhibit excellent stability upon exposure to stress storage conditions. The discoveries of this study bring the literature one step closer to fully understanding the "therapeutic deep eutectic" phenomenon. Through correlation between parent reagents' physicochemical properties and the synthesised products' characteristics, we establish a more educated process for the prediction and engineering of THEDES.

Chondroitin Sulphate-Chitosan polyelectrolyte complexes for etorocoxib transdermal delivery: in silico, in vitro and in vivo studies

Rheumatoid arthritis (RA) is a chronic autoimmune disease which affects around 1% globally leading to joint inflammation and disability. Etorocoxib (ETR) is a potent COX-2 inhibitor traditionally used orally to alleviate RA induced inflammation, yet it causes hepatic side effects on prolonged use. This study aims for in silico optimization of ETR polyelectrolyte complex (PEC) utilizing chondroitin sulphate (CS) and chitosan (CH) for transdermal delivery to RA-inflamed joints with a synergistic anti-inflammatory action owing to CS. An artificial neural network (ANN) combined with 22 factorial design was used to optimize the PEC formula according to particle size (PS) and entrapment efficiency (%EE) by varying CS and CH concentrations. The optimum ETR PEC was incorporated in a gel and examined for its in vitro release, ex vivo permeation, in vivo inflammatory biomarkers, and histopathological evaluation in rats. The optimized formula (F3) with 0.1 CH% w/w and 0.5 CS %w/w showed a PS of 214.98 ± 17.24 nm, %EE 75.31 ± 1.67%, and enhanced in vitro release profile, ex vivo permeation and in vivo anti-inflammatory effect compared to ETR gel via suppressing the expression of IL-6, TNF-α, and TGF-β pro-inflammatory cytokines as well as the additional anti-inflammatory effect of CS. In conclusion, ETR-PEC gel holds promise as transdermal therapy for managing RA-induced inflammation.

PVA/Chitosan Thin Films Containing Silver Nanoparticles and Ibuprofen for the Treatment of Periodontal Disease

Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.

Preparation, Characterization and Study of the Dissociation of Naproxen from Its Chitosan Salt

Salts of naproxen (NAP) with chitosan (CTS) and reticulated chitosan (CEP) were prepared under optimized conditions to maximize the yield of reaction. The objective was to evaluate the dissociation in water, which can guide studies of release of the drug from biopolymeric salts in pharmaceutical applications. Higher salification was found after 24 h of reaction at 60 °C in a molar ratio 1:1.05 (CTS:NAP, mol/mol), resulting in a degree of substitution (DS) of 17% according to ¹³C NMR, after neutralization of the –NH₂ group of the biopolymer by the carboxylic group of the drug. The presence of NAP salt is evidenced by FTIR bands related to the –NH₃⁺ group at 856 cm⁻¹, a decrease in crystallinity index in XRD diffractograms as well as changes in mass loss ratios (TG/DTG/DTA) and increased thermal stability of the salt regarding CTS itself. The CEPN crosslinked salt presented a DS = 3.6%, probably due to the shielding of the –NH₂ groups. Dissociation studies revealed that at pH 2.00, dissociation occurred faster when compared to at pH 7.00 in the non-reticulated salt, while the opposite was observed for the reticulated one.

Comparative Study of Polysaccharide-Based Hydrogels: Rheological and Texture Properties and Ibuprofen Release

Polysaccharides are attractive gelling agents in pharmacy due to their safety, biocompatibility, biodegradability, relatively easy way of preparation, and low price. Due to their variable physical-chemical properties, polysaccharides have potentialities to be used for designing new drug delivery systems for controlled drug release. In this comparative study, rheological and texture properties as well as the in vitro release of model drug ibuprofen (IBU) with 11 polysaccharide-based hydrogels were investigated. The in vitro release of IBU significantly differed between (i) neutral (hydroxy/alkylcelluloses), (ii) anionic (carboxyalkylcellulose and its sodium salt, tragacanth, carrageenan, xanthan gum), and (iii) cationic (chitosans) hydrogels due to different contribution of provided interactions and viscosity within the hydrogel groups. The drug release kinetics of each hydrogel system was evaluated for five kinetic models. Several combinations of cationic hydrogels with neutral or anionic ones were performed to illustrate possibilities of providing modified IBU release profiles. In this context, chitosan was presented as an effective modifier of diffusion profiles for negatively charged drugs formulated into combined polymeric systems, providing their prolonged release. The most appropriate hydrogel for the topical application (i.e., providing favorable rheological and texture properties along with the highest drug release) was selected from a studied series of polysaccharide-based hydrogels.

Ring Vibrations to Sense Anionic Ibuprofen in Aqueous Solution as Revealed by Resonance Raman

We unravel the potentialities of resonance Raman spectroscopy to detect ibuprofen in diluted aqueous solutions. In particular, we exploit a fully polarizable quantum mechanics/molecular mechanics (QM/MM) methodology based on fluctuating charges coupled to molecular dynamics (MD) in order to take into account the dynamical aspects of the solvation phenomenon. Our findings, which are discussed in light of a natural bond orbital (NBO) analysis, reveal that a selective enhancement of the Raman signal due to the normal mode associated with the C-C stretching in the ring, νC=C, can be achieved by properly tuning the incident wavelength, thus facilitating the recognition of ibuprofen in water samples.

Chitosan caged liposomes for improving oral bioavailability of rivaroxaban: in vitro and in vivo evaluation

In this study, chitosan (CS) caged classic liposomes (CLs) and flexible liposomes (FLs) were developed to enhance the oral bioavailability of rivaroxaban (RVX) in the fasted condition. The prepared formulations were subjected to physicochemical characterization included: FTIR, DSC, zeta potential, particle size, polydispersity index, entrapment efficiency, in vitro dissolution, and transmission electron microscope imaging. The selected formulation (RVX-TFL2) composed of PL S100/Tween 80 (85/15% w/w) and coated with CS solution in the strength of (0.2% w/v) had a particle size of 105.67 nm, a zeta potential of +5.67 mV and EE of 96.07%. Compared to RXV suspension, the pharmacokinetic parameters (C _max, AUC_0-24, and AUC_0-∞) of RVX-TFL2 showed no statistically significant difference (P > 0.05) in the fasted and fed test animals. Besides, RVX bioavailability with RVX-TFL2 was improved by 59.66% and 26.97% in the fed and fasted states, respectively, compared to RVX suspension in the fed state. The result highlighted the efficacy of the prepared liquid formulation comprising CS coated liposomes in improving the oral bioavailability of RVX regardless of the fed state. Moreover, the studied liquid formulation could be utilized in developing a liquid dosage form that might be useful as a pediatric formulation of RVX.

Nanomagnetite-embedded PLGA Spheres for Multipurpose Medical Applications

We report on the synthesis and evaluation of biopolymeric spheres of poly(lactide-co-glycolide) containing different amounts of magnetite nanoparticles and Ibuprofen (PLGA-Fe₃O₄-IBUP), but also chitosan (PLGA-CS-Fe₃O₄-IBUP), to be considered as drug delivery systems. Besides morphological, structural, and compositional characterizations, the PLGA-Fe₃O₄-IBUP composite microspheres were subjected to drug release studies, performed both under biomimetically-simulated dynamic conditions and under external radiofrequency magnetic fields. The experimental data resulted by performing the drug release studies evidenced that PLGA-Fe₃O₄-IBUP microspheres with the lowest contents of Fe₃O₄ nanoparticles are optimal candidates for triggered drug release under external stimulation related to hyperthermia effect. The as-selected microspheres and their chitosan-containing counterparts were biologically assessed on macrophage cultures, being evaluated as biocompatible and bioactive materials that are able to promote cellular adhesion and proliferation. The composite biopolymeric spheres resulted in inhibited microbial growth and biofilm formation, as assessed against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans microbial strains. Significantly improved antimicrobial effects were reported in the case of chitosan-containing biomaterials, regardless of the microorganisms' type. The nanostructured composite biopolymeric spheres evidenced proper characteristics as prolonged and controlled drug release platforms for multipurpose biomedical applications.

Investigation of the blends of chitosan and tragacanth as potential drug carriers for the delivery of ibuprofen in the intestine

This study provides a new potential hydrogel for the intestinal delivery of ibuprofen.

Influence of molecular weight and degree of deacetylation of low molecular weight chitosan on the bioactivity of oral insulin preparations

The objective of the present study was to prepare and characterize low molecular weight chitosan (LMWC) with different molecular weight and degrees of deacetylation (DDA) and to optimize their use in oral insulin nano delivery systems. Water in oil nanosized systems containing LMWC-insulin polyelectrolyte complexes were constructed and their ability to reduce blood glucose was assessed in vivo on diabetic rats. Upon acid depolymerization and testing by viscosity method, three molecular weights of LMWC namely, 1.3, 13 and 18 kDa were obtained. As for the DDA, three LMWCs of 55%, 80% and 100% DDA were prepared and characterized by spectroscopic methods for each molecular weight. The obtained LMWCs showed different morphological and in silico patterns. Following complexation of LMWCs with insulin, different aggregation sizes were obtained. Moreover, the in vivo tested formulations showed different activities of blood glucose reduction. The highest glucose reduction was achieved with 1.3 kDa LMWC of 55% DDA. The current study emphasizes the importance of optimizing the molecular weight along with the DDA of the incorporated LMWC in oral insulin delivery preparations in order to ensure the highest performance of such delivery systems.

Chitin and chitosan as direct compression excipients in pharmaceutical applications

Despite the numerous uses of chitin and chitosan as new functional materials of high potential in various fields, they are still behind several directly compressible excipients already dominating pharmaceutical applications. There are, however, new attempts to exploit chitin and chitosan in co-processing techniques that provide a product with potential to act as a direct compression (DC) excipient. This review outlines the compression properties of chitin and chitosan in the context of DC pharmaceutical applications.

A new controlled-release liquid delivery system based on diclofenac potassium and low molecular weight chitosan complex solubilized in polysorbates

A complex of low molecular weight chitosan (LMWC) with oleic acid and diclofenac potassium (DP) was prepared and dispersed in high concentrations of polysorbate 20, 60 and 80 in water to form a solution which releases its components slowly. The formed complex was characterized using different analytical methods. The size of the resulted nanoparticles and the effect of tweens on size were followed using dynamic light scattering (DLS). The release of DP from this delivery system was monitored by altering the molecular weight of chitosan and the type and concentration of the polysorbates used. The most suitable preparation consisted of DP, LMWC 13 kDa, and oleic acid. This was dispersed in 5% Tween 80 and the release was followed by the adaptation of USP II apparatus using a cellophane bag. This preparation offers a release of up to 24 h.

Low molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride

Chitosan has become a focus of major interest in recent years due to its excellent biocompatibility, biodegradability and non-toxicity. Although this material has already been extensively investigated in the design of different types of drug delivery systems, it is still little explored for stomach specific drug delivery systems. The objective of the present investigation was to explore the potential of low molecular mass chitosan (LMCH) as carrier for a hydrodynamically balanced system (HBS) for sustained delivery of water soluble drug ciprofloxacin hydrochloride (CP). Various formulations were prepared by physical blending of drug and polymer(s) in varying ratios followed by encapsulation into hard gelatin capsules. All the formulations remained buoyant in 0.1 mol L⁻¹ HCl (pH 1.2) throughout the experiment. Effect of addition of xanthan gum (XG) or ethyl cellulose (EC) on drug release was also investigated. Zero order drug release was obtained from the formulations containing LMCH alone or in combination with XG, and in one instance also with EC. Our results suggest that LMCH alone or in combination with XG is an excellent material for stomach specific sustained delivery of CP from hydrodynamically balanced single unit capsules.

Chitosan-sodium lauryl sulfate nanoparticles as a carrier system for the in vivo delivery of oral insulin

The present work explores the possibility of formulating an oral insulin delivery system using nanoparticulate complexes made from the interaction between biodegradable, natural polymer called chitosan and anionic surfactant called sodium lauryl sulfate (SLS). The interaction between chitosan and SLS was confirmed by Fourier transform infrared spectroscopy. The nanoparticles were prepared by simple gelation method under aqueous-based conditions. The nanoparticles were stable in simulated gastric fluids and could protect the encapsulated insulin from the GIT enzymes. Additionally, the in vivo results clearly indicated that the insulin-loaded nanoparticles could effectively reduce the blood glucose level in a diabetic rat model. However, additional formulation modifications are required to improve insulin oral bioavailability.