Chemical Equilibria Modeling of Calcium Phosphate Precipitation and Transformation in Simulated Physiological Solutions

Thermodynamic and Kinetic Studies of the Precipitation of Double-Doped Amorphous Calcium Phosphate and Its Behaviour in Artificial Saliva

Simulated body fluid (SBF) and artificial saliva (AS) are used in biomedical and dental research to mimic the physiological conditions of the human body. In this study, the biomimetic precipitation of double-doped amorphous calcium phosphate in SBF and AS are compared by thermodynamic modelling of chemical equilibrium in the SBF/AS-CaCl2-MgCl2-ZnCl2-K2HPO4-H2O and SBF/AS-CaCl2-MgCl2-ZnCl2-K2HPO4-Glycine/Valine-H2O systems. The saturation indices (SIs) of possible precipitate solid phases at pH 6.5, close to pH of AS, pH 7.5, close to pH of SBF, and pH 8.5, chosen by us based on our previous experimental data, were calculated. The results show possible precipitation of the same salts with almost equal SIs in the two biomimetic environments at the studied pHs. A decrease in the saturation indices of magnesium and zinc phosphates in the presence of glycine is a prerequisite for reducing their concentrations in the precipitates. Experimental studies confirmed the thermodynamic predictions. Only X-ray amorphous calcium phosphate with incorporated Mg (5.86-8.85 mol%) and Zn (0.71-2.84 mol%) was obtained in the experimental studies, irrespective of biomimetic media and synthesis route. Solid-state nuclear magnetic resonance (NMR) analysis showed that the synthesis route affects the degree of structural disorder of the precipitates. The lowest concentration of dopant ions was obtained in the presence of glycine. Further, the behaviour of the selected amorphous phase in artificial saliva was studied. The dynamic of Ca2+, Mg2+, and Zn2+ ions between the solid and liquid phases was monitored. Both direct excitation 31P NMR spectra and 1H-31P CP-MAS spectra proved the increase in the nanocrystalline hydroxyapatite phase upon increasing the incubation time in AS, which is more pronounced in samples with lower additives. The effect of the initial concentration of doped ions on the solid phase transformation was assessed by solid-state NMR.

Different survival strategies of the phosphate-mineralizing bacterium Enterobacter sp. PMB-5 in response to cadmium stress: Biomineralization, biosorption, and bioaccumulation

The phosphate-mineralizing bacteria (PMBs) has shown great potential as a sustainable solution to support pollution remediation through its induced mineralization capacity. However, few studies have been conducted on the mechanism of cadmium (Cd) tolerance in PMBs. In this study, a PMB strain, Enterobacter sp. PMB-5, screened from Cd-contaminated rhizosphere soil, has high resistance to Cd (540 - 1220 mg/L) and solubilized phosphate (232.08 mg/L). The removal experiments showed that the strain PMB-5 removed 71.69-98.24% and 34.83-76.36% of Cd with and without biomineralization, respectively. The characterization result of SEM, EDS, TEM, XPS and XRD revealed that PMB-5 induced Cd to form amorphous phosphate precipitation through biomineralization and adopted different survival strategies, including biomineralization, bioaccumulation, and biosorption to resistance Cd in the microbial induced phosphate precipitation (MIPP) system and the non-MIPP system, respectively. Moreover, the results of whole genome sequencing and qRT-PCR indicated that phosphorus metabolism genes such as pst, pit, phn, ugp, ppk, etc. and heavy metal tolerance genes (including ion transport, ion efflux, redox, antioxidant stress), such as czcD, zntA, mgtA, mgtC, katE, SOD2, dsbA, cysM, etc. were molecular for the PMB-5 mineralization and Cd tolerance of PMB-5. Together, our findings suggested Enterobacter sp. PMB-5 is a potential target for developing more effective bioinoculants for Cd contamination remediation.

New Nano-Crystalline Hydroxyapatite-Polycarboxy/Sulfo Betaine Hybrid Materials: Synthesis and Characterization

Hybrid materials based on calcium phosphates and synthetic polymers can potentially be used for caries protection due to their similarity to hard tissues in terms of composition, structure and a number of properties. This study is focused on the biomimetic synthesis of hybrid materials consisting of hydroxiapatite and the zwitterionic polymers polysulfobetaine (PSB) and polycarboxybetaine (PCB) using controlled media conditions with a constant pH of 8.0-8.2 and Ca/P = 1.67. The results show that pH control is a dominant factor in the crystal phase formation, so nano-crystalline hydroxyapatite with a Ca/P ratio of 1.63-1.71 was observed as the mineral phase in all the materials prepared. The final polymer content measured for the synthesized hybrid materials was 48-52%. The polymer type affects the final microstructure, and the mineral particle size is thinner and smaller in the synthesis performed using PCB than using PSB. The final intermolecular interaction of the nano-crystallized hydroxyapatite was demonstrated to be stronger with PCB than with PSB as shown by our IR and Raman spectroscopy analyses. The higher remineralization potential of the PCB-containing synthesized material was demonstrated by in vitro testing using artificial saliva.

Synthetic Calcium-Phosphate Materials for Bone Grafting

Synthetic bone grafting materials play a significant role in various medical applications involving bone regeneration and repair. Their ability to mimic the properties of natural bone and promote the healing process has contributed to their growing relevance. While calcium-phosphates and their composites with various polymers and biopolymers are widely used in clinical and experimental research, the diverse range of available polymer-based materials poses challenges in selecting the most suitable grafts for successful bone repair. This review aims to address the fundamental issues of bone biology and regeneration while providing a clear perspective on the principles guiding the development of synthetic materials. In this study, we delve into the basic principles underlying the creation of synthetic bone composites and explore the mechanisms of formation for biologically important complexes and structures associated with the various constituent parts of these materials. Additionally, we offer comprehensive information on the application of biologically active substances to enhance the properties and bioactivity of synthetic bone grafting materials. By presenting these insights, our review enables a deeper understanding of the regeneration processes facilitated by the application of synthetic bone composites.

Precipitation and phase transformation of dicalcium phosphate dihydrate in electrolyte solutions of simulated body fluids: Thermodynamic modeling and kinetic studies

The metastable and stable equilibria of a precipitation in the biomimetic system Simulated Body Fluid (SBF)-CaCl₂ -K₂ HPO₄ -KOH-H₂ O were modeled in the pH region 3-7 at a Ca/P molar ratio of 1 using a thermodynamic approach. Saturation indices (SI) of the solid phases were calculated and used to prognose the salt precipitation/dissolution processes. At рН < 4, the solutions are undersaturated (SI < 0) in respect of all solid phases; co-precipitation of dicalcium phosphate dihydrate (DCPD) and hydroxyapatite (HA) occurs at рН 4 while at рН > 4 the stable phase is DCPD but the number of other co-precipitated solid phases increases. This result is associated with the increase in HPO₄ ^2- , CaHPO₄ ⁰ , and KНРО₄ ^- species in the studied solution. The phase transformations of five model DCPD-based calcium phosphate precursors in three simulated body fluids differing in their composition, to more stable octacalcium phosphate and hydroxyapatite was thermodynamically prognosed and experimentally confirmed by kinetic studies, as well as by chemical, XRD, SEM, and IR methods.

Predicting the risk of kidney stone formation in the nephron by 'reverse engineering'

Although most kidney stones are found in the calyx, they are usually initiated upstream in the nephron by precipitation there of certain incipient mineral phases. The risk of kidney stone formation can thus be indicated by changes in the degree of saturation of these minerals in the nephron fluid. To this end, relevant concentration profiles in the fluid along the nephron have been calculated by starting with specified urine compositions and imposing constraints from the corresponding, much less variable, blood compositions. A model for supersaturation within ten sections of both long and short nephrons has accordingly been developed based on this 'reverse engineering' of the necessary substance concentrations coupled with chemical speciation distributions calculated by our Joint Expert Speciation System (JESS). This allows the likelihood of precipitation to be assessed based on Ostwald's 'Rule of Stages'. Differences between normal and stone-former profiles have been used to identify sections in the nephron where conditions seem most likely to induce heterogeneous nucleation.

Fractional removal of manganese and ammonia nitrogen from electrolytic metal manganese residue leachate using carbonate and struvite precipitation

A comparative investigation of hydroxide precipitation, sulfide precipitation, carbonate precipitation and the struvite formation process for removing manganese and ammonia nitrogen from electrolytic metal manganese residue leachate (EMMRL) was investigated. Chemical equilibrium model-Visual MINTEQ was applied to simulate the chemical reactions and optimize chemical dosages in manganese and ammonia nitrogen removal. Phase transition, morphology, and valence state of the precipitates were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray Photoelectron Spectroscopy (XPS). Results indicated that carbonate precipitation prior to the other two methods for removal of manganese and ammonia nitrogen. The removal efficiency of manganese was 99.9%, when molar ratio of C to Mn was 1.1:1 at pH 9.5, and manganese was removed in the form of MnCO₃. When molar ratio of P to N was 1.1:1 at pH 9.5, the removal efficiency of ammonia nitrogen was 97.4%, and ammonia nitrogen was removed in the form of struvite. Economic evaluation reveals that the treatment cost was 9.316 $ m^-3 when carbonate and phosphate was used to remove manganese and ammonia nitrogen from EMMRL.