Redox copolymerization of acrylonitrile with fumaronitrile as a precursor for carbon fibre

Molecularly Selective Polymer Interfaces for Electrochemical Separations

The molecular design of polymer interfaces has been key for advancing electrochemical separation processes. Precise control of molecular interactions at electrochemical interfaces has enabled the removal or recovery of charged species with enhanced selectivity, capacity, and stability. In this Perspective, we provide an overview of recent developments in polymer interfaces applied to liquid-phase electrochemical separations, with a focus on their role as electrosorbents as well as membranes in electrodialysis systems. In particular, we delve into both the single-site and macromolecular design of redox polymers and their use in heterogeneous electrochemical separation platforms. We highlight the significance of incorporating both redox-active and non-redox-active moieties to tune binding toward ever more challenging separations, including structurally similar species and even isomers. Furthermore, we discuss recent advances in the development of selective ion-exchange membranes for electrodialysis and the critical need to control the physicochemical properties of the polymer. Finally, we share perspectives on the challenges and opportunities in electrochemical separations, ranging from the need for a comprehensive understanding of binding mechanisms to the continued innovation of electrochemical architectures for polymer electrodes.

Sequential and alternating RAFT single unit monomer insertion: model trimers as the guide for discrete oligomer synthesis

A complete set of model trimers and their synthetic kinetics are established to guide the synthesis of diverse sequence-defined polymers.

Synthesis of microporous organic polymers via radical polymerization of fumaronitrile with divinylbenzene

To circumvent the intractable disadvantages of a hyper-cross-linked strategy based on the Friedel–Crafts reaction, a new type of microporous organic polymer (MOP) has been successfully prepared using fumaronitrile and divinylbenzene via alternating radical polymerization.

Preparation of acrylonitrile/acrylamide copolymer beads via a redox method and their adsorption properties after chemical modification

Poly(acrylonitrile-co-acrylamide) [poly(AN-co- AM)] was prepared via a redox method, with sodium bisulfite and potassium persulphate as the initiators. High yield was attained in up to 76% of monomer conversion within 3 h of reaction time. The copolymers were then chemically modified with hydroxylamine hydrochloride to obtain amidoxime functional groups in the polyacrylonitrile (PAN) system. The role of the amidoxime group is to form a chelating ion-exchange network based on acrylonitrile for the adsorption of heavy metal ions in aqueous solution. Based on the Fourier transform infrared spectra, the appearance of a strong band at the regions of 1680 and 3300–3400 cm-1 due to the stretching vibration of C=O and NH2 groups, respectively, confirmed the copolymerization of acrylamide into the PAN system. In the case of modified copolymers, there was an appearance of broad bands at the regions of ∼3300 and ∼900 cm-1, which corresponded to the stretching vibrations of O-H and =N-O, respectively, from the oxime group. The scanning electron microscopy showed that the average size of the copolymer particles was ∼149 nm, and the average size increased to ∼217 nm in the case of the modified copolymer. The amidoximed poly(AN-co-AM) was analyzed by inductively coupled plasma to investigate its adsorption behavior toward Cu(II).

Synthesis and Thermal Properties of Acrylonitrile/Butyl Acrylate/Fumaronitrile and Acrylonitrile/Ethyl Hexyl Acrylate/Fumaronitrile Terpolymers as a Potential Precursor for Carbon Fiber

A synthesis of acrylonitrile (AN)/butyl acrylate (BA)/fumaronitrile (FN) and AN/EHA (ethyl hexyl acrylate)/FN terpolymers was carried out by redox polymerization using sodium bisulfite (SBS) and potassium persulphate (KPS) as initiator at 40 °C. The effect of comonomers, BA and EHA and termonomer, FN on the glass transition temperature (T_g) and stabilization temperature was studied using Differential Scanning Calorimetry (DSC). The degradation behavior and char yield were obtained by Thermogravimetric Analysis. The conversions of AN, comonomers (BA and EHA) and FN were 55%-71%, 85%-91% and 76%-79%, respectively. It was found that with the same comonomer feed (10%), the T_g of AN/EHA copolymer was lower at 63 °C compared to AN/BA copolymer (70 °C). AN/EHA/FN terpolymer also exhibited a lower T_g at 63 °C when compared to that of the AN/BA/FN terpolymer (67 °C). By incorporating BA and EHA into a PAN system, the char yield was reduced to ~38.0% compared to that of AN (~47.7%). It was found that FN reduced the initial cyclization temperature of AN/BA/FN and AN/EHA/FN terpolymers to 228 and 221 °C, respectively, in comparison to that of AN/BA and AN/EHA copolymers (~260 °C). In addition, FN reduced the heat liberation per unit time during the stabilization process that consequently reduced the emission of volatile group during this process. As a result, the char yields of AN/BA/FN and AN/EHA/FN terpolymers are higher at ~45.1% and ~43.9%, respectively, as compared to those of AN/BA copolymer (37.1%) and AN/EHA copolymer (38.0%).