A novel biocompatible magnetic iron oxide nanoparticles/hydrogel based on poly (acrylic acid) grafted onto starch for controlled drug release

Synthesis and Characterization of Novel Magnetic Nano-Biocomposite Hydrogels Based on Starch-g-poly(acrylic acid) Reinforced by Cellulose Nanofibers for Cu2+ Ion Removal

One of the crucial challenges of the adsorption process is to recapture the adsorbent from the solution, especially for adsorbents in powder form. This study synthesized a novel magnetic nano-biocomposite hydrogel adsorbent to successfully remove Cu²⁺ ions, followed by convenient recovery and reusability of the adsorbent. The Cu²⁺ adsorption capacity of starch-g-poly(acrylic acid)/cellulose nanofibers (St-g-PAA/CNFs) composite hydrogel and magnetic composite hydrogel (M-St-g-PAA/CNFs) was investigated and compared in both bulk and powder forms. Results showed that Cu²⁺ removal kinetics and swelling rate were improved by grinding the bulk hydrogel into powder form. The kinetic data and adsorption isotherm were best correlated with the pseudo-second-order and Langmuir models, respectively. The maximum monolayer adsorption capacity values of M-St-g-PAA/CNFs hydrogels loaded with 2 and 8 wt % Fe₃O₄ nanoparticles in 600 mg/L Cu²⁺ solution were found to be 333.33 and 555.56 mg/g, respectively, compared to 322.58 mg/g for the St-g-PAA/CNFs hydrogel. Vibrating sample magnetometry (VSM) results demonstrate that the magnetic hydrogel that included 2 and 8 wt % magnetic nanoparticles exhibited paramagnetic behavior with the magnetization of 0.6-0.66 and 1-1.04 emu/g at the plateau, respectively, which showed a proper magnetic property and good magnetic attraction in the magnetic field for separating the adsorbent from the solution. Also, the synthesized compounds were characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and Fourier transform infrared spectroscopy (FTIR). Finally, the magnetic bioadsorbent was successfully regenerated and reused for four treatment cycles.

A CMC-g-poly(AA-co-AMPS)/Fe3O4 hydrogel nanocomposite as a novel biopolymer-based catalyst in the synthesis of 1,4-dihydropyridines

A CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was successfully designed and prepared via graft copolymerization of AA and AMPS on CMC followed by the cross-linking addition of FeCl₃/FeCl₂. The synthesized hydrogel nanocomposite was characterized by Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, elemental mapping, thermogravimetric analysis/differential thermal analysis (TGA/DTA), and vibrating sample magnetometry (VSM). The CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was employed as a biocompatible catalyst for the green synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives under thermal and ultrasound-assisted reaction conditions. High efficiency, low catalyst loadings, short reaction time, frequent catalyst recovery, environmental compatibility and mild conditions were found in both methods.

Different Applications of Temperature responsive nanogels as a new drug delivery system mini review

Temperature-sensitive drug delivery systems (TSDDS) are one of the systems that have received more attention in medical science these days due to their advantages. As these systems are sensitive to temperature, drug delivery to the target becomes more specific. Temperature-sensitive nanogels have many applications, including microbial infections, cancer therapy, transdermal use and tissue repair. These systems are characterized by minimal toxicity, improved therapeutic efficacy and reduced exposure to normal cells. This mini-review is prepared with different types of temperature-sensitive nanogel formation, release mechanisms, and their different applications. Various systems reported under these categories for targeted and controlled delivery of different classes of drugs, such as anti-cancer and antibiotic drugs with special emphasis on anti-cancer drugs and tissue healing, are discussed in this mini-review.

Recent Advances of Stimuli-Responsive Polysaccharide Hydrogels in Delivery Systems: A Review

Hydrogels obtained from natural polymers have received widespread attention for their excellent biocompatible property, nontoxicity, easy gelation, and functionalization. Polysaccharides can regulate the gut microbiota and improve the intestinal microenvironment, thus exerting the healthy effect of intestinal immunity. In an active substance delivery system, the extent and speed of the substance reaching its target are highly dependent on the carrier. Thus, the smart active substance delivery systems are gradually increasing. The smart polysaccharide-hydrogels possess the ability in response to external stimuli through changing their volume phase and structure, which are applied in various fields. Natural polysaccharide-based hydrogels possess excellent characteristics of environmental friendliness, good biocompatibility, and abundant sources. According to the response type, natural polysaccharide-based hydrogels are usually divided into stimulus-responsive hydrogels, including internal response (pH, temperature, enzyme, redox) and external response (light, electricity, magnetism) hydrogels. The delivery system based on polysaccharides can exert their effects in the gastrointestinal tract. At the same time, polysaccharides may also take part in regulating the brain signals through the microbiota-gut-brain axis. Therefore, natural polysaccharide-hydrogels are considered as promising biomaterials, which can be designed as delivery systems for regulating the gut-brain axis. This article reviews the research advance of stimulus-responsive hydrogels, which focus on the types, response characteristics, and applications for polysaccharide-based smart hydrogels as delivery systems.

Simple ultrasonic-assisted approach to prepare polysaccharide-based aerogel for cell research and histocompatibility study

Salecan, a water-soluble microbial polysaccharide with attractive biocompatible characteristics, is very suitable for aerogel fabrication. However, the practical application of salecan-based aerogels for cell culture was limited by complicated preparation method, lack of cell anchorage signals, and the ability to modulate this properly. Here, a smart aerogel was designed by ultrasonic-assisted self-assembly of salecan and cationic starch (CAS) without any organic and toxic crosslinkers. The ultrasound waves generated a marked impact on self-assemble process by means of ultrasonic cavitation. Aerogel network was produced by strong electrostatic attractions between the polysaccharides. Especially, salecan/CAS ratio can be precisely modulated to tailor the hydrophilicity, mechanical stiffness, and morphologic property. The specific surface area of the aerogels gradually increased with the increase in salecan/CAS ratio. These aerogels were non-cytotoxic, and the incorporation of salecan into them promoted cell-matrix interactions by directionally supporting cell adhesion and proliferation. Most strikingly, in vivo experiment revealed that the histological features in the main organs of the mice were similar to those observed in the PBS-treated control group, and no sign of the histopathological abnormality or tissue destruction was observed, indicating the excellent histocompatibility of the aerogels. This study offered a new and powerful avenue to fabricate functional biomaterial.

Synthesis of photodegradable cassava starch-based double network hydrogel with high mechanical stability for effective removal of methylene blue

Synthetic hydrogel has been widely used in several applications, but poor mechanical stability and biodegradability limit their applications and raise environmental concerns. Here, a biodegradable hydrogel was developed via simple free-radical polymerization of poly(acrylic acid) (PAA) in the presence of cassava starch (CS) and poly(vinyl alcohol). The hydrogel showed exceptional mechanical and physical properties. The structural morphology changed at higher CS content from a dense fiber-like porous network to larger pores with thicker cell walls. Due to the formation of a double network structure via physical entanglement, the compressive modulus significantly increased from 27 kPa (CS 0 wt%) to 127 kPa (CS 50 wt%). Reducing synthetic content (PAA) to 25 wt% and increasing CS content to 50 wt% did not reduce the removal efficiency of the hydrogel toward methylene blue (MB). The maximum adsorption capacity of the CS50 hydrogel was 417.0 mg/g. Data fitting to theoretical models indicated monolayer adsorption of MB on a homogeneous surface via chemisorption. Removal efficiency was higher than 70% at the 5^th cycle of adsorption-desorption. The biodegradability and photodegradability of the hydrogel were improved by grafting with CS. The developed hydrogel represents an alternative biodegradable adsorbent for a sustainable system of wastewater treatment.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

Preparation and characterization of a novel pH-sensitive Salecan-g-poly(acrylic acid) hydrogel for controlled release of doxorubicin

Salecan is a novel water-soluble extracellular β-glucan produced by a salt-tolerant strain Agrobacterium sp. ZX09. Salecan is suitable for the fabrication of hydrogels for biomedical applications due to its excellent physicochemical and biological properties. In this paper, a series of pH-sensitive hydrogels were prepared in aqueous solution by the graft copolymerization of Salecan and acrylic acid (AA) using N,N'-methylene diacrylamide as a crosslinker for controlled drug delivery. The structure and thermal stability of the resulting hydrogels were characterized by FT-IR, XRD and TGA. By SEM analysis, freeze-dried hydrogels displayed an interconnected porous structure with tunable pore size in the range of 23.2-90.3 μm. The swelling behavior of the hydrogels was shown to be highly dependent on the environmental pH, salt type and concentration, as well as the contents of Salecan and BAAm. They are almost unswellable at pH 1.2 and swollen extensively at pH 6.86. Meanwhile, the increase in the content of hydrophilic Salecan could enhance the swelling ratio, whereas the presence of more BAAm reduced the swelling capacity but promoted the water retention to some extent. Rheological tests revealed that storage modulus G' was strongly influenced by the crosslink density of the obtained hydrogel network. Especially, doxorubicin (DOX) as a model anti-cancer drug was very efficiently loaded into the negatively charged hydrogels (up to 69.4 wt%) through electrostatic interactions. More importantly, the release of DOX from this intelligent system exhibited pH-responsive behavior and a sustained release pattern. For SPA2, the cumulative release profile showed a low level of drug release (about 12.3 wt% in 24 h) at pH 7.4, and was significantly accelerated at pH 4.0 (over 40 wt% in 6 h). Cytotoxicity experiments confirmed that all blank hydrogels were non-toxic to A549 cells, while DOX released from the drug-loaded hydrogels remained biologically active and had the capability to kill cancer cells. The preliminary results clearly suggested that the Salecan-g-PAA hydrogels may be promising carriers for controlled drug delivery.

Controlled uptake and release of lysozyme from glycerol diglycidyl ether cross-linked oxidized starch microgel

A biodegradable microgel system based on glycerol-1,3-diglycidyl ether (GDGE) cross-linked TEMPO-oxidized potato starch polymers was developed for controlled uptake and release of proteins. A series of microgels were prepared with a wide range of charge density and cross-link density. We found both swelling capacity (SWw) and lysozyme uptake at saturation (Γsat) increased with increasing degree of oxidation (DO) and decreasing cross-link density. Microgel of DO100% with a low cross-link density (RGDGE/polymer (w/w) of 0.025) was selected to be the optimum gel type for lysozyme absorption; Γsat increased with increasing pH and decreasing ionic strength. It suggests that the binding strength was the strongest at high pH and low ionic strength, which was recognized as the optimum absorption conditions. The lysozyme release was promoted at low pH and high ionic strength, which were considered to be the most suitable conditions for triggering protein release. These results may provide useful information for the controlled uptake and release of proteins by oxidized starch microgels.