Ion-stimuli responsive dimethylaminoethyl methacrylate/hydroxyethyl methacrylate copolymeric hydrogels: mutual influence of reaction parameters on the swelling and mechanical strength

Water-soluble biodegradable polyesters with pH and ionic responsivity

The synthesis of novel water-soluble polymers with biodegradability is an effective way to mitigate their negative environmental impacts. In this study, semi-aromatic copolyester poly(butylene succinate-co-butylene terephthalate) (PBST) with exceptional biodegradability is used as the resin matrix. Anionic sodium 1-3-isophthalate-5-sulfonate (SIPA) is introduced as a fourth monomer to prepare random poly(butylene succinate-co-butylene terephthalate-co-butylene 5-sodiosulfoisophthalate) (PBSTS) copolyesters by melt copolymerization. The incorporation of ionic groups enhances the hydrophilicity and water absorption of the copolyesters, resulting in water-soluble materials that exhibit ionic and temperature responsivity. Furthermore, the ionized biodegradable copolyesters demonstrate distinct pH-dependent degradation, which is accelerated at pH = 5.5 and 8.5 but inhibited at pH = 7.2. Degradation assessments in simulated body fluids reveal that the PBSTS copolyesters exhibit significant degradation in gastric fluids at pH = 1.5 with minimal degradation in intestinal fluids at pH = 6.8 and in body fluids at pH = 7.0. This unique degradation performance highlights the potential of these materials for addressing the challenges associated with selective drug delivery and localized controlled release in the human body.

Influence of High Strain Dynamic Loading on HEMA-DMAEMA Hydrogel Storage Modulus and Time Dependence

Hydrogels have been extensively studied for biomedical applications such as drug delivery, tissue-engineered scaffolds, and biosensors. There is a gap in the literature pertaining to the mechanical properties of hydrogel materials subjected to high-strain dynamic-loading conditions even though empirical data of this type are needed to advance the design of innovative biomedical designs and inform numerical models. For this work, HEMA-DMAEMA hydrogels are fabricated using a photopolymerization approach. Hydrogels are subjected to high-compression oscillatory dynamic mechanical loading at strain rates equal to 50%, 60%, and 70%, and storage and loss moduli are observed over time, e.g., 72 h and 5, 10, and 15 days. As expected, the increased strains resulted in lower storage and loss moduli, which could be attributed to a breakdown in the hydrogel network attributed to several mechanisms, e.g., increased network disruption, chain scission or slippage, and partial plastic deformation. This study helps to advance our understanding of hydrogels subjected to high strain rates to understand their viscoelastic behavior, i.e., strain rate sensitivity, energy dissipation mechanisms, and deformation kinetics, which are needed for the accurate modeling and prediction of hydrogel behavior in real-world applications.

Reversible photonic hydrogel sensors via holographic interference lithography

Continuous monitoring of physiological conditions and biomarkers via optical holographic sensors is an area of growing interest to facilitate the expansion of personalised medicine. Here, a facile laser-induced dual polymerization method is developed to fabricate holographic hydrogel sensors for the continuous and reversible colorimetric determination of pH variations over a physiological range in serum (pH 7-9). Readout parameters simulated through a Finite-difference time-domain Yee's algorithm retrieve the spectral response through expansion. Laser lithography of holographic hydrogel sensor fabrication is achieved via a single 355 nm laser pulse to initiate polymerization of ultrafine hydrogel fringes. Eliminating the requirement for complex processing of toxic components and streamlining the synthetic procedure provides a simpler route to mass production. Optimised pH-responsive hydrogels contain amine bearing functional co-monomers demonstrating reversible Bragg wavelength shifts of 172 nm across the entire visible wavelength range with pH variation from 7.0 to 9.0 upon illumination with broadband light. Photolithographic recording of information shows the ability to convey detailed information to users for qualitative identification of pH. Holographic sensor reversibility over 20 cycles showed minimal variation in replay wavelength supporting reliable and consistent readout, with optimised sensors showing rapid response times of <5 min. The developed sensors demonstrate the application to continuous monitoring in biological fluids, withstanding interference from electrolytes, saccharides, and proteins colorimetrically identifying bovine serum pH over a physiological range. The holographic sensors benefit point-of-care pH analysis of biological analytes which could be applied to the identification of blood gas disorders and wound regeneration monitoring through colorimetric readouts.

pHEMA: An Overview for Biomedical Applications

Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications.

Smart pH responsive drug delivery system based on poly(HEMA-co-DMAEMA) nanohydrogel

The advent of smart nanohydrogel has revealed new opportunities for scientists to develop the most efficient anti-cancer vehicles with safe and biocompatible profile. In this experiment, using reversible addition-fragmentation chain transfer polymerization method as a novel, safe and smart pH responsive formulation of poly (hydroxyethyl methacrylate-co-N,N-dimethylaminoethyl methacrylate) and poly (ethylene glycol)-diacrylate as cross-linker were synthesized. The synthesized structure was confirmed by Fourier-transform infrared spectroscopy and proton nuclear magnetic resonance methods. The pH responsive behavior of the synthesized particles was checked by size measurement in two different pH values (5.5 and 7.4) by dynamic light scattering and transmission electron microscopy. The prepared structure had nanometer sizes of 180 in medium with pH of 7.4, when it encountered acidic medium (e.g. pH 5.5), the particles swelled to about 400 nm. The efficiency of the prepared pH responsive nanohydrogels was tested as a drug delivery system. An anti-cancer drug, doxorubicin successfully interacted with this material. The release profiles of nanoparticles carrying drug molecules were checked in two different simulated pH of healthy organs (7.4) and tumor site (5.5). Despite lower release in pH of 7.4 (∼20%), an increased drug release of 80% was obtained in pH of 5.5. The in vitro toxicity assay, apoptosis evaluation and uptake experiments were performed on breast cancer cell line (MCF-7), which showed a time dependency cellular entrance, an enhanced cytotoxicity and apoptosis induction by the doxorubicin loaded nanoparticles. Hemolysis assays confirmed the safety and hemocompatibility of the developed nanohydrogel. The suitable size (<200 nm), pH responsive behavior, anti-proliferative activity and apoptosis induction in cancer cells and hemocompatibility were the noticeable features of the developed doxorubicin adsorbed nanoparticle, which introduced this formulation as an ideal vehicle in anti-cancer drug delivery.

Intelligent anticancer drug delivery performances of two poly(N-isopropylacrylamide)-based magnetite nanohydrogels

This article evaluates the anticancer drug delivery performances of two nanohydrogels composed of poly(N-isopropylacrylamide-co-itaconic anhydride) [P(NIPAAm-co-IA)], poly(ethylene glycol) (PEG), and Fe₃O₄ nanoparticles. For this purpose, the magnetite nanohydrogels (MNHGs) were loaded with doxorubicin hydrochloride (DOX) as a universal anticancer drug. The morphologies and magnetic properties of the DOX-loaded MNHGs were investigated using transmission electron microscopy (TEM) and vibrating-sample magnetometer (VSM), respectively. The sizes and zeta potentials (ξ) of the MNHGs and their corresponding DOX-loaded nanosystems were also investigated. The DOX-loaded MNHGs showed the highest drug release values at condition of 41 °C and pH 5.3. The drug-loaded MNHGs at physiological condition (pH 7.4 and 37 °C) exhibited negligible drug release values. In vitro cytotoxic effects of the DOX-loaded MNHGs were extensively evaluated through the assessing survival rate of HeLa cells using the MTT assay, and there in vitro cellular uptake into the mentioned cell line were examined using fluorescent microscopy and fluorescence-activated cell sorting (FACS) flow cytometry analyses. As the results, the DOX-loaded MNHG1 exhibited higher anticancer drug delivery performance in the terms of cytotoxic effect and in vitro cellular uptake. Thus, the developed MNHG1 can be considered as a promising de novo drug delivery system, in part due to its pH and thermal responsive drug release behavior as well as proper magnetite character toward targeted drug delivery.

Sea cucumber mimicking bacterial cellulose composite hydrogel with ionic strength-sensitive mechanical adaptivity

A novel sea cucumber-mimicking bacterial cellulose composite hydrogel shows stiffness changes in response to ionic strength without significant volume changes.

Temperature and pH responsive 3D printed scaffolds

This study focused on developing novel materials for 3D printed reverse thermo-responsive (RTR) and pH-sensitive structures, using the stereolithography (SLA) technique and demonstrated the double responsiveness of the constructs printed.