Design and synthesis of porous polymeric materials and their applications in gas capture and storage: a review

Polypyrene Porous Organic Framework for Efficiently Capturing Electron Specialty Gases

The polypyrene polymer with an extended π-conjugated skeleton is attractive for perfluorinated electron specialty gas (F-gas) capture as the high electronegativity of fluorine atoms makes F-gases strongly electronegative gases. Herein, a polypyrene porous organic framework (termed as Ppy-POF) with an extended π-conjugated structure and excellent acid resistance was constructed. Systematic studies have shown that the abundant π-conjugated structures and gradient electric field distribution in Ppy-POF can endow it exceptional adsorption selectivity for high polarizable F-gases and xenon (Xe), which has been collaboratively confirmed by single-component gas adsorption experiments, time-dependent adsorption rate tests, dynamic breakthrough experiments, etc. Electrostatic potential distribution and charge density difference based on Grand Canonical Monte Carlo simulations and density functional theory calculations demonstrate that the selective adsorption of F-gases and Xe in Ppy-POF is attributed to the strong charge-transfer effect and polarization effect between Ppy-POF and gases. These results manifest that the POF with an extended π-conjugated structure and gradient electric field distribution has great potential in efficiently capturing electron specialty gases.

Evaluation of an Imine-Linked Polymer Organic Framework for Storage and Release of H2S and NO

Hydrogen sulfide (H₂S) and nitric oxide (NO) are especially known as toxic and polluting gases, yet they are also endogenously produced and play key roles in numerous biological processes. These two opposing aspects of the gases highlight the need for new types of materials to be developed in addition to the most common materials such as activated carbons and zeolites. Herein, a new imine-linked polymer organic framework was obtained using the inexpensive and easy-to-access reagents isophthalaldehyde and 2,4,6-triaminopyrimidine in good yield (64%) through the simple and catalyst-free Schiff-base reaction. The polymeric material has microporosity, an A_BET surface area of 51 m²/g, and temperature stability up to 300 °C. The obtained 2,4,6-triaminopyrimidine imine-linked polymer organic material has a higher capacity to adsorb NO (1.6 mmol/g) than H₂S (0.97 mmol/g). Release studies in aqueous solution showed that H₂S has a faster release (3 h) from the material than NO, for which a steady release was observed for at least 5 h. This result is the first evaluation of the possibility of an imine-linked polymer organic framework being used in the therapeutic release of NO or H₂S.

Pendant Length-Dependent Electrochemical Performances for Conjugated Organic Polymers as Solid-State Polymer Electrolytes in Lithium Metal Batteries

The development of solid-state polymer electrolytes (SPEs) has been plagued by poor ionic conductivity, low ionic transference number, and limited electrochemical potential window. The exploitation of ionized SPEs is a feasible avenue to solve this problem. Herein, conjugated organic polymers (COPs) with excellent designability and rich pore structures have been selected as platforms for exploration. Three cationic COPs with different chain lengths of quaternary ammonium salts (CbzT@C_x, x = 4, 6, 9) are designed and applied to SPEs for the first time. Meanwhile, the effects of chain lengths on their electrochemical performances are compared. Especially, CbzT@C₉ shows the most attractive electrochemical performance due to its high specific surface area of 212.3 m² g^-1. The larger specific surface area allows more exposure of the long-chain quaternary ammonium cation groups, which is more favorable for the dissociation of lithium salts. Moreover, the flexible long-chain structure increases the compatibility with poly(ethylene oxide) (PEO) and reduces the crystallinity of PEO to some extent. The richer pore structure can accommodate more PEO, further disrupting the crystallinity of PEO and creating more channels for the ether-oxygen chain to transport lithium ions. At 60 °C, the SPE (CbzTM@C₉) presents an excellent ionic conductivity (σ) of 8.00 × 10^-4 S cm^-1. CbzTM@C₉ has a lithium-ion transference number (t_Li+) of 0.48. Thus, the assembled Li/CbzTM@C₉/LiFePO₄ battery provides a good discharge capacity of 158.8 mAh g^-1 at 0.1C. After 70 cycles, the capacity retention rate is 93.8% with a Coulombic efficiency of 98%. The excellent flexibility brings stable power supply capability under various bending angles to the assembled Li/CbzTM@C₉/LiFePO₄ soft-packed battery. The project uses conjugated organic polymers in SPEs and creates an avenue to develop flexible energy storage equipment.

Magnetite Metal-Organic Frameworks: Applications in Environmental Remediation of Heavy Metals, Organic Contaminants, and Other Pollutants

Due to the increasing environmental pollution caused by human activities, environmental remediation has become an important subject for humans and environmental safety. The quest for beneficial pathways to remove organic and inorganic contaminants has been the theme of considerable investigations in the past decade. The easy and quick separation made magnetic solid-phase extraction (MSPE) a popular method for the removal of different pollutants from the environment. Metal-organic frameworks (MOFs) are a class of porous materials best known for their ultrahigh porosity. Moreover, these materials can be easily modified with useful ligands and form various composites with varying characteristics, thus rendering them an ideal candidate as adsorbing agents for MSPE. Herein, research on MSPE, encompassing MOFs as sorbents and Fe₃O₄ as a magnetic component, is surveyed for environmental applications. Initially, assorted pollutants and their threats to human and environmental safety are introduced with a brief introduction to MOFs and MSPE. Subsequently, the deployment of magnetic MOFs (MMOFs) as sorbents for the removal of various organic and inorganic pollutants from the environment is deliberated, encompassing the outlooks and perspectives of this field.

Highly Efficient and Selective Capture of Pb(II) by New Crosslinked Melamine-Based Polymethyl Methacrylate for Water Treatment

Owing to the recent developments in the polymer’s properties and application, the demands for designing different structure of polymers are greater than ever. Crosslinked polymers (CPs) are a type of porous materials that have a variety of potential applications. Because of simple methods of modification of polymethyl methacrylate (PMMA), the crosslinked PMMA considers the most commonly polymeric adsorbents. A new crosslinked melamine-based polymethyl methacrylate (C-PMMA/Mel) was prepared via a polycondensation reaction between PMMA and melamine used as a crosslinking agent. Different characterization methods were carried out to investigate the molecular structures, thermal stability, and morphology. C-PMMA/Mel was applied for the adsorption behavior toward different metal cations and detected a selective to Pb(II). The evaluation of the new polymers as adsorbent against Pb(II) ion was studied using the contact time, adsorbent dose, initial concentration, and effects of pH. The adsorption efficiency of heavy metals was improved in the presence of melamine in polymeric matrix. The C-PMMA/Mel has high efficacy in the removal of ~94% of Pb at pH 6 for one hour. Noticeably, the adsorption performance of C-PMMA/Mel perfectly suited with Freundlich isotherm and the pseudo-second-order kinetic model. Additionally, the new materials showed no obvious loss in Pb(II) removal after 7 cycles.

Fluorine-Induced Electric Field Gradient in 3D Porous Aromatic Frameworks for Highly Efficient Capture of Xe and F-Gases

The development of robust and efficient porous adsorbents is essential for capturing xenon (Xe) and perfluorinated electron specialty gases (F-gases) in semiconductor exhaust gases, as toxic and corrosive gases coexist in high-temperature plasma degradation off-gases. Herein, two three-dimensional (3D) fluorinated porous aromatic frameworks (PAFs) with abundant fluorine (labeled PAF-4F and PAF-8F) were synthesized. The two PAFs exhibit high IAST selectivity in capturing Xe and F-gases from semiconductor off-gases, as well as excellent physicochemical stability and reusability, which have been collaboratively verified by single-component gas adsorption and regeneration tests, etc. Density functional theory (DFT) simulation revealed that the entry of strongly electronegative fluorine atoms into PAFs causes localized charge separation on the polymer pore surface, resulting in the preferential adsorption of high-polarizability Xe and F-gases via induced electric field gradients. Systematic studies have sufficiently manifested the great potential of fluorine-functionalized porous materials to effectively capture Xe and F-gases, which provides practical insights into the fabrication of highly stable porous adsorbents for harsh operating conditions.

Reinforcing the tetracene-based two-dimensional C48H16 sheet by decorating the Li, Na, and K atoms for hydrogen storage and environmental application -A DFT study

To meet the increasing need of energy resources, hydrogen (H₂) is being considered as a promising candidate for energy carrier that has motivated research into appropriate storage materials among scientists. Thus, in this study for the first time, zig-zag and armchair edged tetracene based porous carbon sheet (C₄₈H₁₆) is investigated for H₂ storage using the density functional theory. To explore the hydrogen storage capacity, the hydrogen molecule is initially positioned parallel to the C₄₈H₁₆ sheet at three different sites, resulting in lower adsorption energies of -0.020, -0.024, and -0.015 eV respectively. The Li, Na, and K atoms are decorated to improve H₂ adsorption on the C₄₈H₁₆ sheet. The Li atom decorated C₄₈H₁₆ sheet has a higher binding energy value of -2.070 eV than the Na and K atom decorated C₄₈H₁₆ sheet. The presence of Li, Na, and K atoms on the C₄₈H₁₆ sheet enhance the H₂ adsorption energy than the H₂ on the pristine C₄₈H₁₆ sheet. The decrease of Mulliken charge in alkali metal atoms (Li, Na, and K atom) on the C₄₈H₁₆ sheet reveal that the electron is transferred from H-σ orbital to s orbital of alkali metal atoms on the C₄₈H₁₆ sheet, leads to the enhancement of H₂ binding. Compared to H₂ adsorption on Na and K atom decorated C₄₈H₁₆ sheet, the H₂ adsorption on Li atom decorated C₄₈H₁₆ sheet has the maximum adsorption energy value of -0.389 eV. The obtained hydrogen storage capacity of Li, Na, and K atoms decorated C₄₈H₁₆ sheets are about 7.49 wt%, 7.31 wt%, and 7.14 wt% respectively for four H₂ molecules, which is greater than the targeted hydrogen storage capacity of the United States Department of Energy (DOE). Thus the obtained results in this work reveal that the decorated C₄₈H₁₆ sheets with Li, Na, and K atom plays the potential role in the H₂ storage.

Porosity Design on Conjugated Microporous Poly(Aniline)S for Exceptional Mercury(II) Removal

The use of conjugated microporous polymers (CMPs) in practical wastewater treatment demands further design on the pore structure, otherwise their adsorption capacities toward heavy-metal ions were moderate. Here, we report a rational design approach, which produces hybrid molecular pores in conjugated microporous poly(aniline)s (CMPAs) for mercury removal. It is achieved through a delicate interval introduction of linkers with differential molecular lengths during polymerization, acquiring both diffusion channels and storage pores for radical enhancement of mass transfer and adsorption storage. The resulting CMPA-M featured a large adsorption capacity of 975 mg g^-1 and rapid kinetics that could remove 94.8% of 50 mg g^-1 of mercury(II) within a very short contact time of 48 s, with a promising initial adsorption rate h as high as 113 mg g^-1 min^-1, which was 2.54-fold larger in the adsorption capacity and 45.2-fold faster in the adsorption efficiency compared with the undeveloped CMPAs. More importantly, our CMPA-M-2, with robust stability and easy reusability, was able to scavenge over 99.9% of mercury(II) from the actual wastewater in a harsh condition with a very low pH of 0.77, extremely high salinity of 53,157 mg L^-1, and complex impurities, featuring exceptional selectivity that allows us to extract and recycle a high purity of 99.1% of mercury from the wastewater. These outcomes demonstrate the unprecedented potential of CMPs for environmental remediation and real-world mercury extraction and present benchmarks for CMP-based mercury adsorbents.

Mesoporous Membrane Materials Based on Ultra-High-Molecular-Weight Polyethylene: From Synthesis to Applied Aspects

The development of new porous polymeric materials with nanoscale pore dimensions and controlled morphology presents a challenging problem of modern materials and membrane science, which should be based on scientifically justified approaches with the emphasis on ecological issues. This work offers a facile and sustainable strategy allowing preparation of porous nanostructured materials based on ultra-high-molecular-weight polyethylene (UHMWPE) via the mechanism of environmental intercrystallite crazing and their detailed characterization by diverse physicochemical methods, including SEM, TEM, AFM, liquid and gas permeability, DSC, etc. The resultant porous UHMWPE materials are characterized by high porosity (up to ~45%), pore interconnectivity, nanoscale pore dimensions (below 10 nm), high water vapor permeability [1700 g/(m² × day)] and high gas permeability (the Gurley number ~300 s), selectivity, and good mechanical properties. The applied benefits of the advanced UHMWPE mesoporous materials as efficient membranes, breathable, waterproof, and insulating materials, light-weight materials with reduced density, gas capture and storage systems, porous substrates and scaffolds are discussed.

Bifunctional ZIF-8 Grown Webs for Advanced Filtration of Particulate and Gaseous Matters: Effect of Charging Process on the Electrostatic Capture of Nanoparticles and Sulfur Dioxide

Metal-organic framework (MOF), an emerging class of porous hybrid inorganic-organic crystals, has been applied for various environmental remediation strategies including liquid and air filtration. In this study, the role of the zeolite imidazole framework-8 (ZIF-8) was explored on the charge trapping ability and its contribution to capturing the targeted pollutants of NaCl nanoparticles and SO₂ gas. Poly(lactic acid) fibers with controlled surface pores were electrospun using water vapor-induced phase separation, and the fiber surface was uniformly coated with ZIF-8 crystals via an in situ growth method. As a novel process approach, the corona charging process was applied to the ZIF-8 grown webs. The ZIF-8 promoted the charge trapping in the corona process, and the charged ZIF-8 web showed a significantly improved electrostatic filtration efficiency. Also, the charged ZIF-8 web showed an enhanced SO₂ capture ability, both in the static and dynamic air flow states, demonstrating the applicability as a bifunctional filter for both particulate and gaseous matters. The approach of this study is novel in that both particulate and gas capture capabilities were associated with the charge trapping ability of ZIF-8, implementing the corona charging process to the ZIF-8 webs.

Development of Photocurable Polyacrylate-Based PolyHIPEs and the Study of the Kinetics of Photopolymerization, and of Their Thermal, Mechanical and Hydrocarbon Absorption Properties

This article describes a comprehensive study to obtain polymeric porous materials via a photopolymerization technique, using acrylate-based high internal phase emulsions (HIPEs), as a template. The aim of obtaining these polymers was to use them as hydrocarbon absorbing materials. Kinetics of photopolymerization of the acrylate monomers and of the HIPEs were conducted to optimize the process. The obtained monoliths were characterized by thermal analysis such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The morphology and surface area were analyzed by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis. The compression properties of the materials were determined, as well as their absorption properties of hydrocarbons such as hexane, diesel, toluene and chloroform. The findings show that the acrylate-HIPEs displayed high reactivity photopolymerizing in 20 min. The glass transition temperature of the materials were in the range of 2 to 83 °C, depending on the ratio of acrylates in the photocurable formulation, displaying the characteristic morphology with voids and interconnecting windows. The polyHIPEs exhibited superior properties of absorption of the studied hydrocarbons. The order of capability of absorption was chloroform > toluene > hexane > diesel. The optimum absorbing material was that with trimethylolpropane triacrylate, ethylhexyl acrylate and isobornyl acrylate in a 1:0.9:2.1 ratio, which absorbed 778% of chloroform, 378% of toluene, 306 % of hexane and 236% of diesel.

Covalent Triazine Frameworks Based on the First Pseudo-Octahedral Hexanitrile Monomer via Nitrile Trimerization: Synthesis, Porosity, and CO2 Gas Sorption Properties

Herein, we report the first synthesis of covalent triazine-based frameworks (CTFs) based on a hexanitrile monomer, namely the novel pseudo-octahedral hexanitrile 1,4-bis(tris(4'-cyano-phenyl)methyl)benzene 1 using both ionothermal reaction conditions with ZnCl2 at 400 °C and the milder reaction conditions with the strong Brønsted acid trifluoromethanesulfonic acid (TFMS) at room temperature. Additionally, the hexanitrile was combined with different di-, tri-, and tetranitriles as a second linker based on recent work of mixed-linker CTFs, which showed enhanced carbon dioxide captures. The obtained framework structures were characterized via infrared (IR) spectroscopy, elemental analysis, scanning electron microscopy (SEM), and gas sorption measurements. Nitrogen adsorption measurements were performed at 77 K to determine the Brunauer-Emmett-Teller (BET) surface areas range from 493 m2/g to 1728 m2/g (p/p0 = 0.01-0.05). As expected, the framework CTF-hex6 synthesized from 1 with ZnCl2 possesses the highest surface area for nitrogen adsorption. On the other hand, the mixed framework structure CTF-hex4 formed from the hexanitrile 1 and 1,3,5 tricyanobenzene (4) shows the highest uptake of carbon dioxide and methane of 76.4 cm3/g and 26.6 cm3/g, respectively, at 273 K.

A Process for Carbon Dioxide Capture Using Schiff Bases Containing a Trimethoprim Unit

Environmental problems associated with the growing levels of carbon dioxide in the atmosphere due to the burning of fossil fuels to satisfy the high demand for energy are a pressing concern. Therefore, the design of new materials for carbon dioxide storage has received increasing research attention. In this work, we report the synthesis of three new Schiff bases containing a trimethoprim unit and the investigation of their application as adsorbents for carbon dioxide capture. The reaction of trimethoprim and aromatic aldehydes in acid medium gave the corresponding Schiff bases in 83%–87% yields. The Schiff bases exhibited surface areas ranging from 4.15 to 20.33 m2/g, pore volumes of 0.0036–0.0086 cm3/g, and average pore diameters of 6.64–1.4 nm. An excellent carbon dioxide uptake (27–46 wt%) was achieved at high temperature and pressure (313 K and 40 bar, respectively) using the Schiff bases. The 3-hydroxyphenyl-substituted Schiff base, which exhibited a meta-arrangement, provided the highest carbon dioxide uptake (46 wt%) due to its higher surface area, pore volume, and pore diameter compared with the other two derivatives with a para-arrangement.

A Pressure Swing Approach to Selective CO2 Sequestration Using Functionalized Hypercrosslinked Polymers

Functionalized hypercrosslinked polymers (HCPs) with surface areas between 213 and 1124 m²/g based on a range of monomers containing different chemical moieties were evaluated for CO₂ capture using a pressure swing adsorption (PSA) methodology under humid conditions and elevated temperatures. The networks demonstrated rapid CO₂ uptake reaching maximum uptakes in under 60 s. The most promising networks demonstrating the best selectivity and highest uptakes were applied to a pressure swing setup using simulated flue gas streams. The carbazole, triphenylmethanol and triphenylamine networks were found to be capable of converting a dilute CO₂ stream (>20%) into a concentrated stream (>85%) after only two pressure swing cycles from 20 bar (adsorption) to 1 bar (desorption). This work demonstrates the ease with which readily synthesized functional porous materials can be successfully applied to a pressure swing methodology and used to separate CO₂ from N₂ from industrially applicable simulated gas streams under more realistic conditions.

Attapulgite as a skeleton for the fabrication of magnetic structural-functional materials with a superhydrophobic shell

Fabrication of structural-functional materials endowed with unique features from attapulgite, and which may be provided a well structural platform for diversified applications, such as adsorbent for organic pollutants, the superhydrophobic coating and water/oil separation.

Current Research Trends and Perspectives on Solid-State Nanomaterials in Hydrogen Storage

Hydrogen energy, with environment amicable, renewable, efficiency, and cost-effective advantages, is the future mainstream substitution of fossil-based fuel. However, the extremely low volumetric density gives rise to the main challenge in hydrogen storage, and therefore, exploring effective storage techniques is key hurdles that need to be crossed to accomplish the sustainable hydrogen economy. Hydrogen physically or chemically stored into nanomaterials in the solid-state is a desirable prospect for effective large-scale hydrogen storage, which has exhibited great potentials for applications in both reversible onboard storage and regenerable off-board storage applications. Its attractive points include safe, compact, light, reversibility, and efficiently produce sufficient pure hydrogen fuel under the mild condition. This review comprehensively gathers the state-of-art solid-state hydrogen storage technologies using nanostructured materials, involving nanoporous carbon materials, metal-organic frameworks, covalent organic frameworks, porous aromatic frameworks, nanoporous organic polymers, and nanoscale hydrides. It describes significant advances achieved so far, and main barriers need to be surmounted to approach practical applications, as well as offers a perspective for sustainable energy research.

The synergistic effect of the carbon shell pore volume and core Pd size of Pd@hollow@C-X for the synthesis of H2O2

Yolk–shell Pd@hollow@C-X (X = 1.5, 3.2, 4.5 and 6) catalysts with Pd as the core and porous carbon as the shell were prepared via the inverse microemulsion method.

New Porous Silicon-Containing Organic Polymers: Synthesis and Carbon Dioxide Uptake

The design and synthesis of new multifunctional organic porous polymers has attracted significant attention over the years due to their favorable properties, which make them suitable for carbon dioxide storage. In this study, 2-, 3-, and 4-hydroxybenzaldehyde reacted with phenyltrichlorosilane in the presence of a base, affording the corresponding organosilicons 1–3, which further reacted with benzidine in the presence of glacial acetic acid, yielding the organic polymers 4–6. The synthesized polymers exhibited microporous structures with a surface area of 8.174–18.012 m2 g−1, while their pore volume and total average pore diameter ranged from 0.015–0.035 cm3 g−1 and 1.947–1.952 nm, respectively. In addition, among the synthesized organic polymers, the one with the meta-arrangement structure 5 showed the highest carbon dioxide adsorption capacity at 323 K and 40 bar due to its relatively high surface area and pore volume.

Revealing the Surface Effect on Gas Transport and Mechanical Properties in Nonporous Polymeric Membranes in Terms of Surface Free Energy

The contribution of surface roughness of nonporous polymeric membranes to their gas separation and mechanical properties was studied in terms of surface free energy. The membranes samples were prepared based on glassy polymers with different chain rigidity, namely polysulfone (PSU), cellulose triacetate (CTA), and poly(vinyl alcohol) (PVA). The results were obtained by atomic force and scanning electron microscopy (AFM and SEM) with individual gas permeation, wettability, and mechanical testing. The specific surface free energy (as well as its polar and dispersive components) for the polymers was calculated by the Owens-Wendt method. It was proven that the surface roughness of the polymer membranes affects both energy components; however, the degree of this influence depends on the chemical nature of the corresponding polymer. Moreover, it was assumed that the dispersive energy component is inversely correlated with any gases' total permeability. In contrast, the polar one is inversely correlated with the permeability by gases with the ability for site-specific interactions. The gas separation results confirmed this assumption. It was also shown that the mechanical properties of the polymer membranes are also influenced by the surface energy, namely, its dispersive component.

Sulfonated Tetraphenylethylene-Based Hypercrosslinked Polymer as a Heterogeneous Catalyst for the Synthesis of Symmetrical Triarylmethanes via a Dual C–C Bond-Cleaving Path

A sulfonic acid functionalized tetraphenylethylene-based hypercrosslinked polymer (THP-SO3H) with a well-developed porous network and accessible sulfonic acid sites was synthesized and characterized by different analytical techniques. The catalytic prowess of the synthesized material THP-SO3H was investigated in a challenging dual C–C bond-breaking reaction for the synthesis of symmetrical triarylmethanes (TRAMs) in high yield. The scope of the developed metal-free method was also explored with a wide variety of substrates. The organocatalyst can be easily recovered by filtration and reused up to five consecutive cycles without substantial loss in its catalytic efficacy.

Synthesis and use of carvedilol metal complexes as carbon dioxide storage media

Abstract

The consequences of increased fossil fuel consumption on the environment presents a challenge. Carbon dioxide capture is a useful technique to reduce global warming. Therefore, three carvedilol metal (nickel, cobalt, and copper) complexes were synthesized as potential carbon dioxide storage media. The structural and textural properties of metal carvedilol complexes have been established using various techniques. The metal complexes have mesoporous structures in which pore size was approximately 3 nm. Particle size ranged from 51.0 to 393.9 nm with a relatively small surface area (6.126–9.073 m2/g). The carvedilol metal complexes have either type-III or IV nitrogen adsorption–desorption isotherm. The complexes showed reasonable capacity towards carbon dioxide uptake (up to 18.21 cm3/g) under the optimized condition (40 bar and 323 K).

Graphical Abstract

Spray-Drying Synthesis of MOFs, COFs, and Related Composites

ConspectusMetal-organic frameworks (MOFs) and covalent organic frameworks (COFs) are among the most attractive porous materials today. They exhibit outstanding porosity for countless applications such as gas storage, CO₂ capture, gas separation, sensing, drug delivery, and catalysis. Moreover, researchers have recently begun to combine MOFs or COFs with other functional materials to obtain composites that boast the respective strengths, and mitigate the respective weaknesses, of each component, enabling enhanced performance in many of the aforementioned applications. Accordingly, development of methods for fabrication of MOFs, COFs, and related composites is important for facilitating adoption of these materials in industry. One promising synthetic technique is spray-drying, which is already well-integrated in manufacturing processes for diverse sectors. It enables rapid, continuous and scalable production of dry microspherical powders in a single step, leading to lower fabrication costs and shorter production times compared to traditional methods.In this Account, we outline our ongoing work on spray-drying synthesis of crystalline porous MOFs, COFs, and related composites. Versatile and tunable, spray-drying can be adapted to perform reactions involving coordination and covalent chemistry for the synthesis of micrometer spherical beads/superstructures of MOFs and COFs. Likewise, MOF- and COF-based composites can be synthesized using similar conditions as those for pure MOFs or COFs, through the simple introduction of additional functional materials into the feed precursor solution or colloid. Interestingly, spray-drying can also be done in water, thus providing the basis for its use as a scalable green method for industrial fabrication of these materials. To date, spray-drying has already been scaled up for pilot production (kilogram scale) of MOFs.

Synthesis and Use of Valsartan Metal Complexes as Media for Carbon Dioxide Storage

To address global warming through carbon dioxide storage, three valsartan metal complexes were synthesized in excellent yields (87–92%) through a reaction of the appropriate metal chloride (tin chloride, nickel chloride hexahydrate, or magnesium chloride hexahydrate) and excess valsartan (two mole equivalents) in boiling methanol for 3 h. The structures of the metal complexes were established based on the data obtained from ultraviolet-visible, Fourier transform infrared, and proton nuclear magnetic resonance spectra, as well as from elemental analysis, energy-dispersive X-ray spectra, and magnetic susceptibility. The agglomeration and shape of the particles were determined using field emission scanning electron microscopy analysis. The surface area (16.63–22.75 m²/g) of the metal complexes was measured using the Brunauer-Emmett-Teller method, whereas the Barrett-Joyner-Halenda method was used to determine the particle pore size (0.011–0.108 cm³/g), total average pore volume (6.50–12.46 nm), and pore diameter (6.50–12.47 nm), for the metal complexes. The carbon dioxide uptake of the synthesized complexes, at 323 K and 4 MPa (40 bar), ranged from 24.11 to 34.51 cm²/g, and the nickel complex was found to be the most effective sorbent for carbon dioxide storage.

Porous Aromatic Melamine Schiff Bases as Highly Efficient Media for Carbon Dioxide Storage

High energy demand has led to excessive fuel consumption and high-concentration CO2 production. CO2 release causes serious environmental problems such as the rise in the Earth’s temperature, leading to global warming. Thus, chemical industries are under severe pressure to provide a solution to the problems associated with fuel consumption and to reduce CO2 emission at the source. To this effect, herein, four highly porous aromatic Schiff bases derived from melamine were investigated as potential media for CO2 capture. Since these Schiff bases are highly aromatic, porous, and have a high content of heteroatoms (nitrogen and oxygen), they can serve as CO2 storage media. The surface morphology of the Schiff bases was investigated through field emission scanning electron microscopy, and their physical properties were determined by gas adsorption experiments. The Schiff bases had a pore volume of 0.005–0.036 cm3/g, an average pore diameter of 1.69–3.363 nm, and a small Brunauer–Emmett–Teller surface area (5.2–11.6 m2/g). The Schiff bases showed remarkable CO2 uptake (up to 2.33 mmol/g; 10.0 wt%) at 323 K and 40 bars. The Schiff base containing the 4-nitrophenyl substituent was the most efficient medium for CO2 adsorption and, therefore, can be used as a gas sorbent.

Recent Innovation of Metal-Organic Frameworks for Carbon Dioxide Photocatalytic Reduction

The accumulation of carbon dioxide (CO2) pollutants in the atmosphere begets global warming, forcing us to face tangible catastrophes worldwide. Environmental affability, affordability, and efficient CO2 metamorphotic capacity are critical factors for photocatalysts; metal-organic frameworks (MOFs) are one of the best candidates. MOFs, as hybrid organic ligand and inorganic nodal metal with tailorable morphological texture and adaptable electronic structure, are contemporary artificial photocatalysts. The semiconducting nature and porous topology of MOFs, respectively, assists with photogenerated multi-exciton injection and adsorption of substrate proximate to void cavities, thereby converting CO2. The vitality of the employment of MOFs in CO2 photolytic reaction has emerged from the fact that they are not only an inherently eco-friendly weapon for pollutant extermination, but also a potential tool for alleviating foreseeable fuel crises. The excellent synergistic interaction between the central metal and organic linker allows decisive implementation for the design, integration, and application of the catalytic bundle. In this review, we presented recent MOF headway focusing on reports of the last three years, exhaustively categorized based on central metal-type, and novel discussion, from material preparation to photocatalytic, simulated performance recordings of respective as-synthesized materials. The selective CO2 reduction capacities into syngas or formate of standalone or composite MOFs with definite photocatalytic reaction conditions was considered and compared.

Synthesis of Novel Heteroatom-Doped Porous-Organic Polymers as Environmentally Efficient Media for Carbon Dioxide Storage

The high carbon dioxide emission levels due to the increased consumption of fossil fuels has led to various environmental problems. Efficient strategies for the capture and storage of greenhouse gases, such as carbon dioxide are crucial in reducing their concentrations in the environment. Considering this, herein, three novel heteroatom-doped porous-organic polymers (POPs) containing phosphate units were synthesized in high yields from the coupling reactions of phosphate esters and 1,4-diaminobenzene (three mole equivalents) in boiling ethanol using a simple, efficient, and general procedure. The structures and physicochemical properties of the synthesized POPs were established using various techniques. Field emission scanning electron microscopy (FESEM) images showed that the surface morphologies of the synthesized POPs were similar to coral reefs. They had grooved networks, long range periodic macropores, amorphous surfaces, and a high surface area (SBET = 82.71–213.54 m2/g). Most importantly, they had considerable carbon dioxide storage capacity, particularly at high pressure. The carbon dioxide uptake at 323 K and 40 bar for one of the POPs was as high as 1.42 mmol/g (6.00 wt %). The high carbon dioxide uptake capacities of these materials were primarily governed by their geometries. The POP containing a meta-phosphate unit leads to the highest CO2 uptake since such geometry provides a highly distorted and extended surface area network compared to other POPs.

Synthesis of Telmisartan Organotin(IV) Complexes and their use as Carbon Dioxide Capture Media

Novel, porous, highly aromatic organotin(IV) frameworks were successfully synthesized by the condensation of telmisartan and an appropriate tin(IV) chloride. The structures of the synthesized organotin(IV) complexes were elucidated by elemental analysis, 1H-, 13C-, and 119Sn-NMR, and FTIR spectroscopy. The surface morphologies of the complexes were inspected by field emission scanning electron microscopy. The synthesized mesoporous organotin(IV) complexes have a Brunauer-Emmett-Teller (BET) surface area of 32.3-130.4 m2·g-1, pore volume of 0.046-0.162 cm3·g-1, and pore size of around 2.4 nm. The tin complexes containing a butyl substituent were more efficient as carbon dioxide storage media than the complexes containing a phenyl substituent. The dibutyltin(IV) complex had the highest BET surface area (SBET = 130.357 m2·g-1), the largest volume (0.162 cm3·g-1), and was the most efficient for carbon dioxide storage (7.1 wt%) at a controlled temperature (323 K) and pressure (50 bars).