Effective removal of dyes from aqueous solutions using a novel antibacterial polymeric adsorbent

Microwave-assisted synthesis of cross-linked chitosan-metal oxide nanocomposite for methyl orange dye removal from unary and complex effluent matrices

Textile/Dyeing industries have been considered as one of the intense water-consuming units, resulting in the generation of a large volume of dye(s) contaminated effluent posing a heavy burden on the receiving water bodies. Therefore, the identification of methods to synthesize bulk quantity of adsorbent(s) and further their evaluation for the efficient treatment of effluent is one of the most prominent topics. Hence, microwave-assisted method was proposed for the rapid synthesis of nanocomposite (C-CS@ZnO) from natural biomolecule (chitosan-CS), a well-known crosslinker (tripolyphosphate) and metal-oxide (ZnO) nanoparticles. Detailed characterization was performed to identify the structure (SEM, XRD) and composition (FT-IR, XPS) of the sorbent. Sorption experiments with methyl orange (MO) dye solution were carried out under different pH (2.0-12.0), dye concentrations (150-350 mg L^-1), reaction times (0-210 min) and temperature (25-45 °C) to establish the adsorbent at the lab-scale. The maximum sorption capacity (185.2 mg g^-1) was obtained because of the ligand-exchange, Yoshida H-bonding and electrostatic interactions and was best elucidated by Freundlich (R² ≥ 0.99) and pseudo-second-order (R² ≥ 1) models. To simulate the field conditions, the effects of co-existing ions (anions/cations), cocktail dyes/ions mixture and regenerant were also studied. The obtained results suggest its promising applicability at a large scale for textile effluent treatment.

Adsorption of anionic dyes from textile wastewater utilizing raw corncob

Toxic dyes are irrefutable effluent components of textile wastewater, so they have become a major economic and health concern. With the purpose of efficient removal of textile dyes, multiple nature-inspired adsorbents have been applied. Herein, raw corncob is proposed as a novel highly efficient, low-price, and abundantly attainable adsorbent with the potential for uptake of methyl red and methyl orange. Multiple experiments were carried out to optimize parameters including pH, primary concentration, adsorbent dosage, temperature, and contact time. The adsorption was raised with the mounting of the contact time and it was alleviated with the addition of initial concentration. The foremost uptake of dye was apperceived at an acidic medium pH 4 for methyl red and pH 1 for methyl orange. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy were employed to characterize the surfaces of corncobs. The well-fitted Langmuir and Freundlich models (methyl red: R² = 0.9956 and methyl orange: R² = 0.9883) confirmed the homogeneous monolayer adsorption process on the raw corncob surface. The obtained results disclose that corncob is an effectual biosorbent for eliminating anionic dyes without the necessity for any prior modifications.

Mechanistically understanding adsorption of methyl orange, indigo carmine, and methylene blue onto ionic/nonionic polystyrene adsorbents

The involved interaction information concerning adsorbate-adsorbate and adsorbate-adsorbent is indispensable for developing and optimizing adsorption treatment of dye wastewater. Single and bi-solute adsorption of methyl orange (MO), indigo carmine (IC), and methylene blue (MB) on polystyrene anion exchanger (PsAX), defunctionalized version of PsAX (DF-PsAX), and hyper-cross-linked polystyrene adsorbent (MN200) were investigated to obtain a mechanistic understanding. Under acidic condition, higher adsorption efficiencies of PsAX due to extra intermolecular interactions of MO between the protonated tertiary amine group and the sulfate groups were observed, while strong alkaline condition is favorable for the adsorption of IC and MB by PsAX. MN200 exhibited much larger adsorption capacity toward MB than that toward MO or IC, because the fused-rings structure of MB is more polarizable and can form stronger nonionic intermolecular attractions with the matrix structure of polystyrene adsorbents. Bi-solute adsorption reveals that MO has obvious competitive effect toward IC adsorption at low concentrations, but it is not the case for the adsorption at high concentrations, where IC molecules can form intermolecular H-bonding interactions to defend the competition. the thermodynamic parameters confirm the endothermic and spontaneous nature of MO adsorption by PsAX, and ≈ 48 KJ mol^-1 of the enthalpy change (∆H) imply the adsorption is not just physical absorption. Additionally, water/ethanol mixture solution of NaCl can almost thoroughly regenerate the exhausted PsAX, whereas only aqueous solution without ethanol is invalid.