Reversible thermo-electric energy harvesting with phase change material (PCM) composites

Cellulose Nanocrystal Embedded Composite Foam and Its Carbonization for Energy Application

In this study, we fabricated a cellulose nanocrystal (CNC)-embedded aerogel-like chitosan foam and carbonized the 3D foam for electrical energy harvesting. The nanocrystal-supported cellulose foam can demonstrate a high surface area and porosity, homogeneous size ranging from various microscales, and a high quality of absorbing external additives. In order to prepare CNC, microcrystalline cellulose (MCC) was chemically treated with sulfuric acid. The CNC incorporates into chitosan, enhancing mechanical properties, crystallization, and generation of the aerogel-like porous structure. The weight percentage of the CNC was 2 wt% in the chitosan composite. The CNC/chitosan foam is produced using the freeze-drying method, and the CNC-embedded CNC/chitosan foam has been carbonized. We found that the degree of crystallization of carbon structure increased, including the CNCs. Both CNC and chitosan are degradable materials when CNC includes chitosan, which can form a high surface area with some typical surface-related morphology. The electrical cyclic voltammetric result shows that the vertical composite specimen had superior electrochemical properties compared to the horizontal composite specimen. In addition, the BET measurement indicated that the CNC/chitosan foam possessed a high porosity, especially mesopores with layer structures. At the same time, the carbonized CNC led to a significant increase in the portion of micropore.

Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage

Thermal energy storage (TES) is vital to the absorption and release of plenty of external heat for various applications. For such storage, phase change material (PCM) has been considered as a sustainable energy material that can be integrated into a power generator. However, pure PCM has a leakage problem during the phase transition process, and we should fabricate a form stable PCM composite using some supporting materials. To prevent the leakage problem during the phase transition process, two different methods, microencapsulation and 3D porous infiltration, were used to fabricate PCM composites in this work. It was found that both microsphere and 3D porous aerogel supported PCM composites maintained their initial solid state without any leakage during the melting process. Compared with the microencapsulated PCM composite, the 3D porous aerogel supported PCM exhibited a relatively high weight fraction of working material due to its high porosity. In addition, the cross-linked graphene aerogel (GCA) could reduce volume shrinkage effectively during the infiltration process, and the GCA supported PCM composite kept a high latent heat (∆H) and form stability.

Characterization of Phase Change Materials Fabricated with Cross-Linked Graphene Aerogels

3D porous graphene aerogel exhibits a high surface area which can hold plenty of pure phase change material (PCM) into the internal space. In order to maintain the flexibility of PCM without volume shrinkage under the external force, cross-linked graphene aerogel was prepared by the cysteamine vapor method. The cross-linked graphene aerogel had a high stress–strain durability and chemical stability for infiltrating PCM to produce a form-stable PCM composite. The latent heat of PCM is one of the elements to estimate the capacity of PCM thermal energy storage (TES) during the phase transition process. The cross-linked graphene aerogel-supported PCM composite showed a great TES to be utilized in thermal-to-electrical energy harvesting. The cross-linked graphene aerogel also had an excellent mechanical property of preventing damage at a high temperature.

Phase Change Material (PCM) Composite Supported by 3D Cross-Linked Porous Graphene Aerogel

Integration of form-stable phase change material (PCM) composites with a pyro system can provide sufficient electrical energy during the light-on/off process. In this work, modified 3D porous graphene aerogel is utilized as a reliable supporting material to effectively reduce volume shrinkage during the infiltration process. Poly(vinylidene difluoride) (PVDF) is used for a transparent pyro film in the pyro system. The temperature fluctuation gives rise to a noise effect that restricts the generation of energy harvesting. The cross-linked graphene aerogel consisting of PCM composites can stabilize the temperature fluctuation in both melting and cooling processes. This shows that PCM composites can be applied to the pyro system under the change of the external environment. To evaluate the experimental results, a numerical simulation was conducted by using the finite element method (FEM).

Analysis of Thermoelectric Energy Harvesting with Graphene Aerogel-Supported Form-Stable Phase Change Materials

Graphene aerogel-supported phase change material (PCM) composites sustain the initial solid state without any leakage problem when they are melted. The high portion of pure PCM in the composite can absorb or release a relatively large amount of heat during heating and cooling. In this study, these form-stable PCM composites were used to construct a thermoelectric power generator for collecting electrical energy under the external temperature change. The Seebeck effect and the temperature difference between the two sides of the thermal device were applied for thermoelectric energy harvesting. Two different PCM composites were used to collect the thermoelectric energy harvesting due to the different phase transition field in the heating and cooling processes. The graphene nano-platelet (GNP) filler was embedded to increase the thermal conductivities of PCM composites. Maximum output current was investigated by utilizing these two PCM composites with different GNP filler ratios. The thermoelectric energy harvesting efficiencies during heating and cooling were 62.26% and 39.96%, respectively. In addition, a finite element method (FEM) numerical analysis was conducted to model the output profiles.