Studies on extraction behaviour of molybdenum (VI) from acidic radioactive waste using 2(ethylhexyl) phosphonic acids, mono 2(ethylhexyl) ester (PC-88A)/n-dodecane

Targeted elimination of molybdenum ions from a leaching solution with the ability of radiated grafting GMA-PAN nanofibers

In this study, electrospun polyacrylonitrile nanofibers were effectively functionalized for enhanced molybdenum ion adsorption through a multi-step approach. Initially, glycidyl methacrylate was grafted onto the nanofibers via irradiation-induced grafting polymerization, followed by chemical modification with various amino groups, with triethylamine identified as the optimal modifier. The impacts of key synthesis parameters and reaction conditions on grafting level and adsorption capacity were thoroughly investigated, with a focus on achieving maximum efficiency. The resulting nanofibers were characterized using FTIR, SEM, and BET techniques, confirming the successful modification and structural features conducive to adsorption. Furthermore, a comprehensive experimental design, incorporating a central composite design, yielded optimal conditions for molybdenum adsorption, with key parameters including monomer concentration, irradiation dose, adsorbent mass, initial concentration, time, pH, temperature, and amine concentration. The adsorption kinetics were effectively described by the pseudo-second-order model, while the Langmuir isotherm model provided valuable insight into the adsorption behavior. Impressively, the adsorbent exhibited exceptional adsorption efficiency, surpassing 98% even after six adsorption-desorption cycles using 0.5 M HCl. Thermodynamic analysis revealed the exothermic nature of the adsorption process, along with decreased entropy and overall spontaneity, underlining the favorable conditions for molybdenum adsorption. Notably, the synthesized adsorbent demonstrated notable selectivity for molybdenum and achieved an impressive adsorption capacity of 109.79 mg/g, highlighting its potential for practical applications in molybdenum removal from aqueous solutions.

Selective Recovery of Molybdenum over Rhenium from Molybdenite Flue Dust Leaching Solution Using PC88A Extractant

Selective solvent extraction of molybdenum over rhenium from molybdenite (MoS2) flue dust leaching solution was studied. In the present work, thermodynamic calculations of the chemical equilibria in aqueous solution were first performed, and the potential–pH diagram for the Mo–Re–SO42−–H2O system was constructed. With the gained insight on the system, 2-ethylhexyl phosphonic acid mono-(2-ethylhexyl)-ester (PC88A) diluted in kerosene was used as the extractant agent. Keeping constant the reaction temperature and aqueous-to-organic phase ratio (1:1), organic phase concentration and pH were the studied experimental variables. It was observed that by increasing the acidity of the solution and extractant concentration, selectivity towards Mo extraction increased, while the opposite was true for Re extraction. Selective Mo removal (+95%) from leach solution containing ca. 9 g/L Mo and 0.5 g/L Re was achieved when using an organic phase of 5% PC88A at pH = 0. No rhenium was coextracted during 10 min of extraction time at room temperature. Density functional theory (DFT) calculations were performed in order to study the interactions of organic extractants with Mo and Re ions, permitting a direct comparison of calculation results with the experimental data to estimate selectivity factors in Mo–Re separation. For this aim, PC88A and D2EHPA (di-(2-ethylhexyl) phosphoric acid) were simulated. The interaction energies of D2EHPA were shown to be higher than those of PC88A, which could be due to its stronger capability for complex formation. Besides, it was found that the interaction energies of both extractants follow this trend considering Mo species: MoO22+ > MoO42−. It was also demonstrated through DFT calculations that the interaction energies of D2EHPA and PC88A with species are based on these trends, respectively: MoO22+ > MoO42− > ReO4− and MoO22+ > ReO4− > MoO42−, in qualitative agreement with the experimental findings.