Investigation of mass attenuation coefficients of water, concrete and bakelite at different energies using the FLUKA Monte Carlo code

Variation in gamma ray shielding properties of glasses with increasing boron oxide content

The study of radiation shielding properties for a material is an important part of research in scientific world. It is expressed in terms of the linear linear coefficients (LAC) which can also be used to obtain some other parameters. The gamma shielding properties of glass with addition of boron oxides in different amounts were studied, thereby obtaining linear attenuation coefficients (LAC), mean free path (mfp), Exposure Buildup factor (EBF) which were calculated using Phy-X/PSD code. It was found that increasing boron oxide content of 0, 2, 4, 6, 8 (w %) in glass increased the gamma attenuation coefficients.

Characterization of egg shell powder-doped ceramic–metal composites

Titanium is known to be an indispensable element in biomaterials. In this study, boron carbide was considered as an alternative to titanium due to its good mechanical properties. Boron carbide has high temperature resistance, high wear resistance, etc. It is a preferred material due to its properties. Considering this information, different compositions were created by mixing Fe–B4C and egg shell powders. Compositions sintered using powder metallurgy technique were investigated mechanically, physically and metallographically. According to the results of the analysis, it was determined that the hardness increased by 13.75% with the addition of egg shell. The hardness value of 204.12 HB was measured in the sample sintered at 1,400°C by adding 6.66% egg shelter powder.

Characterization of the elastic modulus of ceramic–metal composites with physical and mechanical properties by ultrasonic technique

The scope of this study, that is, the effect of the elastic modulus obtained by ultrasonic method on the physical and mechanical properties of tungsten carbide (WC)-based ceramic–metal composites, which have Ni and Co metallic binder composition produced by powder metallurgy and represented by high strength and hardness criteria, was investigated. In order to obtain composite samples in the study, it was sintered in a microwave furnace at different temperatures to combine the powder particles prepared at the rate of 60% Ni, 20% Co, and 20% WC by weight. Then, the velocities and longitudinal attenuation values of longitudinal and shear ultrasonic waves along the composite sample were measured using the ultrasonic pulse-echo method. The elastic modulus of the composites was determined using ultrasonic velocities and sample density. Hardness testing, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyses were also performed. The results show that the elastic modulus increases with the increase in sintering temperature and ultrasonic wave speeds, but decreases with the longitudinal attenuation value, considering the SEM images and XRD analysis. There is also a linear relationship between elastic modulus and stiffness.

MCNP-X Monte Carlo Code Application for Mass Attenuation Coefficients of Concrete at Different Energies by Modeling 3 × 3 Inch NaI(Tl) Detector and Comparison with XCOM and Monte Carlo Data

Gamma-ray measurements in various research fields require efficient detectors. One of these research fields is mass attenuation coefficients of different materials. Apart from experimental studies, the Monte Carlo (MC) method has become one of the most popular tools in detector studies. An NaI(Tl) detector has been modeled, and, for a validation study of the modeled NaI(Tl) detector, the absolute efficiency of 3 × 3 inch cylindrical NaI(Tl) detector has been calculated by using the general purpose Monte Carlo code MCNP-X (version 2.4.0) and compared with previous studies in literature in the range of 661–2620 keV. In the present work, the applicability of MCNP-X Monte Carlo code for mass attenuation of concrete sample material as building material at photon energies 59.5 keV, 80 keV, 356 keV, 661.6 keV, 1173.2 keV, and 1332.5 keV has been tested by using validated NaI(Tl) detector. The mass attenuation coefficients of concrete sample have been calculated. The calculated results agreed well with experimental and some other theoretical results. The results specify that this process can be followed to determine the data on the attenuation of gamma-rays with other required energies in other materials or in new complex materials. It can be concluded that data from Monte Carlo is a strong tool not only for efficiency studies but also for mass attenuation coefficients calculations.