Sorption of Se(IV) on Fe- and Al-modified bentonite

Selenium removal from water using adsorbents: A critical review

Selenium (Se) has become an increasingly serious water contamination concern worldwide. It is an essential micronutrient for humans and animals, however, can be extremely toxic if taken in excess. Sorption can be an effective treatment for Se removal from a wide range of water matrices. However, despite the synthesis and application of numerous adsorbents for remediation of aqueous Se, there has been no comprehensive review of the sorption capacities of various natural and synthesized sorbents. Herein, literature from 2010 to 2021 considering Se remediation using 112 adsorbents has been critically reviewed and presented in several comprehensive tables including: clay minerals and waste materials (presented in Table 1); zero-valent iron, iron oxides, and binary iron-based adsorbents (Table 2); other metals-based adsorbents (Table 3); carbon-based adsorbents (Table 4); and other adsorbents (Table 5). Each of these tables, and their relevant sections, summarizes preparation/modification methods, sorption capacities of various Se adsorbents, and proposed model/mechanisms of adsorption. Furthermore, future perspectives have been provided to assist in filling noted research gaps for the development of efficient Se adsorbents for real-world applications. This review will help in preliminary screening of various sorbent media to set up Se treatment technologies for a variety of end-users worldwide.

Modification of bentonite clay & its applications: a review

Bentonite clay is one of the oldest clays that humankind has been using from ancient times as traditional habits and remedies. In recent years researchers have found many applications of bentonite clay due to its various physio-chemical properties. In the present work, various physical and chemical properties of bentonite such as surface area, adsorption, swelling properties, cation exchange properties, etc. have been studied. This study also includes various procedures of modification of bentonite clay into Chitosan/Ag-bentonite composite, Fe-Modified bentonite, Hydroxyl-Fe-pillared-bentonite, Organo Bentonite, Organophilic clay, Arenesulfonic Acid-Functionalized Bentonite, Bentonite clay modified with Nb2O5. The study reveals that bentonite clay has large surface area due to similar structure with montmorillonite and it is found that the functionality of bentonite can be increased by increasing total surface area of the clay. Due to high cation exchangeability of bentonite, various cations can be incorporated into it. After purification and modification, the absorbent aluminum phyllosilicate bentonite clay can be used as an efficient catalyst in various types of catalytic reactions. Moreover, bentonite clay can be applied in various field like drilling, civil engineering, agriculture and water treatment.

Materials interacting with inorganic selenium from the perspective of electrochemical sensing

Inorganic selenium, the most common form of harmful selenium in the environment, can be determined using electrochemical sensors, which are compact, fast, reliable and easy-to-operate devices. Despite progress in this area, there is still significant room for developing high-performance selenium electrochemical sensors. To achieve this, one should take into account (i) the electrochemical process that selenium undergoes on the electrode; (ii) the valence state of selenium species in the sample and (iii) modification of the sensor surface by a material with high affinity to selenium. The goal of this review is to provide a knowledge base for these issues. After the Introduction section, mechanisms and principles of the electrochemical reduction of selenium are introduced, followed by a section introducing the modification of electrodes with materials interacting with selenium and a section dedicated to speciation methods, including the reduction of non-detectable Se(VI) to detectable Se(IV). In the following sections, the main types of materials (metallic, polymers, hybrid (nano)materials…) interacting with inorganic selenium (mostly absorbents) are reviewed to show the diversity of properties that may be endowed to sensors if the materials were to be used for the modification of electrodes. These features for the main material categories are outlined in the conclusion section, where it is stated that the engineered polymers may be the most promising modifiers.

Investigation on the efficient separation and recovery of Se(IV) and Se(VI) from wastewater using Fe–OOH–bent

Decontamination of the toxic selenium compound, selenite (Se(IV)) and selenate (Se(VI)), from wastewater is imperative for environmental protection. Efficient approaches to remove Se(IV) and Se(VI) are in urgent needs. In this work, an accessible adsorbent Fe–OOH–bent was prepared and applied for the removal of Se(IV) and Se(VI) from wastewater. The batch experimental results demonstrate that Fe–OOH–bent exhibits high adsorption capacities of 5.01 × 10−4 and 2.28 × 10−4 mol/g for Se(IV) and Se(VI) respectively, which are higher than most of the reported bentonite based materials, especially in the case of Se(VI). Moreover, the Fe–OOH–bent displayed superior selectivity towards Se(IV) and Se(VI) even in the presence of excess competitive anions (Cl−, HCO3 −, NO3 −, SO4 2− and PO4 3−) and HA with concentrations of 1000 times higher than Se(IV) and Se(VI). By evaluating the adsorption ratio of Se(IV) and Se(VI), the reusability of Fe–OOH–bent was great through five adsorption-desorption cycles. For practical application, the column experiments were performed with simulated wastewater samples. The breakthrough and eluting curves of Se(IV) and Se(VI) were investigated through the columns packed with Fe–OOH–bent, and the results show that Se(IV) and Se(VI) can be successfully separated and recovered using 0.1 mol/L Na2SO4 (pH = 9.0) and 0.1 mol/L Na3PO4 (pH = 9.0), respectively. Our work provides a new approach for fractional separation as well as the recovery of Se(IV) and Se(VI) from wastewater.

Preparation of Modified Montmorillonite and Its Application to Rare Earth Adsorption

Montmorillonite, the major clay mineral in the tailings of weathered crust elution-deposited rare earth ores, was modified as an excellent adsorbent to enrich rare earth ions from solutions. It was demonstrated that 5% H2SO4 could be used as a modifier to effectively enhance the adsorption capacity of montmorillonite after modifying for 3 h with a liquid:solid ratio of 40:1 at 90 °C. A superior modified montmorillonite over montmorillonite on adsorption performance was analyzed by the XRD, FT-IR, SEM, and BET (Specific Surface Area and Pore Diameter Analysis). The adsorption behaviors of La3+ and Y3+ on modified montmorillonite were fitted well with the Langmuir isotherm model and their saturated adsorption capacities were 0.178 mmol/g to La3+ and 0.182 mmol/g to Y3+, respectively. Furthermore, (NH4)2SO4 as a common leaching agent in weathered crust elution-deposited rare earth ores, were successfully used as the eluent to recover the adsorbed rare earth ions.

An approach for the efficient immobilization of 79Se using Fe-OOH modified GMZ bentonite

Because of high mobility, the immobilization of long-lived fission product 79Se (often existed as 79Se(IV) and 79Se(VI) anions) is a critical consideration in the repository of high-level radioactive waste. In this work, a Fe-OOH modified bentonite (Fe-OOH-bent) was synthesized as a potential filling material in the repository site for effective adsorption and present the migration of different species of 79Se. The adsorbent was characterized using FT-IR, XRD, XFS, zeta potential and BET to clarify its physical properties, compositions and structures. A good thermal and radiation stabilities of Fe-OOH-bent was confirmed by its stable uptake ratio for Se(IV) and Se(VI) compared to original samples. The batch experimental results show that Se(IV) and Se(VI) can be efficiently removed from aqueous by Fe-OOH-bent within 60 min with maximum adsorption capacities of 68.45 mg/g for Se(IV) and 40.47 mg/g for Se(VI) in the optimal conditions, indicating its high potential application in consideration of its simple synthesis process, low cost and high adsorption capacity in view of immobilization of 79Se. The surface species and variation of oxide state of Fe as well as Se(IV) and Se(VI) onto Fe-OOH-bent were investigated by XPS analysis. The values of relative area of Se(IV)–O and Se(VI)–O in XPS spectra followed the same tendency as their adsorption ratio with the variation of system pH, suggesting that the formation of complexes between selenium species and Fe-OOH-bent surface.

Influence of Fe(II) on the Se(IV) sorption under oxic/anoxic conditions using bentonite

⁷⁹Se, one of the key radionuclides for nuclear waste disposal, threatens the quality of the environment, as well as human health. Therefore, it needs to be permanently isolated from the biosphere. The aim of the study was to investigate the effects of Fe(II)/Fe(III) on the removal of ⁷⁹Se using bentonite in the pH range of 2.0-10.0 under oxic/anoxic conditions. Under oxic conditions, Se(IV) prefers to form inner-sphere complexes with Fe(III)-oxyhydroxide, derived from the oxidization of Fe(II) using oxygen. Interestingly, Se(IV) will interact with Fe(III) and form a poorly soluble ferric selenite at pH ∼4 under oxic conditions. Under anoxic conditions, however, the concentration of Fe(II) is closely related to the sorption process of Se(IV) on bentonite. When the concentration of Fe(II) was less than 1%, Fe(II) combined with the hydroxyl, forming Fe(OH)₂, which generated a disproportionation at pH ∼8 and formed a new sorbent, Fe₃O₄. However, when the concentration of Fe(II) was increased to 5%, reduction precipitation was the primary way to remove Se(IV) in aqueous solution. XANES (X-ray Absorption Near Edge Structure) spectra showed that higher pH values are beneficial for the formation of the final thermodynamic reduction product, Fe selenide. These results suggested that Fe(II) significantly affect the Se(IV) sorption. Overall, this study confirmed the significant role of Fe(II) on the retardation of ⁷⁹Se and on remediation for Se(IV) contamination in the hydrosphere.

Batch and column adsorption behaviors of Se(IV) and Te(IV) on organic and inorganic ion exchangers from HCl solutions

Adsorption behaviors of Se(IV) and Te(IV) on the inorganic ion exchanger ceric tungstate (CeW) was studied under static and dynamic conditions and compared with the adsorption on the organic cation and anion exchangers Dowex-50X8 and AG-2X8, respectively. The radioactive isotopes 75Se and 123mTe were used to trace the respective elements. Some parameters affecting the adsorption were investigated under static conditions. In the case of batch technique the adsorption was studied from slightly acidic HCl as well as slightly alkaline media, i.e. at two pH-ranges. Se(IV) and Te(IV) were adsorbed on both the inorganic ion exchanger (CeW) and on AG-2X8, from slightly alkaline solutions. From the similarity of adsorption on both ion exchangers it was clear that (CeW) acts as an anion exchanger. Moreover, the obtained Kd-values for the adsorption on (CeW) were much higher than those for the adsorption on the organic anion exchanger AG-2X8. Se(IV) was not adsorbed on Dowex-50X8 all over the studied pH-range whereas Te(IV) was slightly adsorbed. Loading and elution behaviors of Se(IV) and Te(IV) on columns of AG-2X8 and (CeW) were studied using solutions of HCl of different concentrations. Some good separation alternatives of Se(IV) and Te(IV) under certain conditions were achieved.