Synthesis of thiol-functionalized hydrotalcite and its application for adsorption of uranium (VI)

U(VI) adsorption by green and facilely modified Ficus microcarpa aerial roots: Behavior and mechanism investigation

Uranium (U)-containing wastewater poses serious pressure to human health and environmental safety. The treatment of U-bearing wastewater using green and facilely fabricated materials is considered a promising alternative. Herein, the raw and modified aerial roots of Ficus microcarpa (RARF and MARF, respectively) were prepared and applied to the treatment of synthesized U-containing wastewater. The results showed that the adsorption process was spontaneous and chemically controlled, which was in good accordance with the pseudo-second-order kinetic and the Redlich-Peterson isotherm adsorption model. The adsorption mechanisms were proposed to be the complexation between U(VI) and oxygen/phosphorus-containing functional groups on MARF.

Preparation of ZnNiAl-LDHs microspheres and their adsorption behavior and mechanism on U(VI)

Ternary zinc-nickel-aluminum hydrotalcites (ZnNiAl-LDHs) were prepared by hydrothermal synthesis. The structure and morphology of the materials were characterized using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), nitrogen adsorption-desorption (BET) and other test techniques. ZnNiAl-LDHs was applied in the treatment of uranium-containing wastewater, the effects of initial pH of the solution, adsorption temperature and contact time on its adsorption performance were systematically investigated, and the adsorption performance of ZnNiAl-LDHs and ZnAl-LDHs on uranyl ions were compared. The result showed that ZnNiAl-LDHs were 3D microspheres self-assembled from flakes, with a specific surface area of 102.02 m²/g, which was much larger than that of flake ZnAl-LDHs (18.49 m²/g), and the saturation adsorption capacity of ZnNiAl-LDHs for uranyl ions (278.26 mg/g) was much higher than that of ZnAl-LDHs for uranyl ions (189.16 mg/g), so the ternary ZnNiAl-LDHs had a more excellent adsorption capacity. In addition, kinetic and thermodynamic studies showed that the adsorption process of ZnNiAl-LDHs on uranyl ions conformed to the pseudo-second-order kinetic model and Langmuir isotherm model. The positive value of ΔH and the negative value of ΔG indicated that the adsorption process was endothermic and spontaneous. The adsorption mechanism was analyzed by X-ray energy spectroscopy (EDS), fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results showed that the adsorption of uranyl ions by ZnNiAl-LDHs mainly consisted of complexation and ion substitution. The research results prove that ZnNiAl-LDHs is an adsorbent with low cost and excellent performance, and it has a good application prospect in the field of uranium-containing wastewater treatment.

Rapid Room-Temperature Preparation of Hierarchically Porous Metal-Organic Frameworks for Efficient Uranium Removal from Aqueous Solutions

The effective removal of uranium from an aqueous solution is a highly valuable process for the environment and health. In this study, we developed a facile and rapid method to synthesize hierarchically porous Cu-BTC (RT-Cu-BTC) using a cooperative template strategy. The as-synthesized RT-Cu-BTC exhibited hierarchically porous structure and excellent thermostability, as revealed by X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Compared with conventional metal-organic frameworks (MOFs) and zeolites, the obtained RT-Cu-BTC exhibited enhanced adsorption capacity (839.7 mg·g-1) and high removal efficiency (99.8%) in the capture of uranium (VI) from aqueous solutions. Furthermore, the conditions such as adsorbent dose, contact time, and temperature in adsorption of uranium (VI) by RT-Cu-BTC were investigated in detail. The thermodynamics data demonstrated the spontaneous and endothermic nature of the uranium (VI) adsorption process. The Langmuir isotherm and pseudo-second-order models could better reflect the adsorption process of uranium (VI) onto RT-Cu-BTC. In addition, the as-synthesized RT-Cu-BTC showed excellent stability in removing uranium (VI) from an aqueous solution. This work provides a facile and rapid approach for fabricating hierarchically porous MOFs to realize a highly efficient removal of uranium (VI) from aqueous systems.

Synthesis of X-Zeolite from Waste Basalt Powder and its Influencing Factors and Synthesis Mechanism

Traditional hydrothermal method (TH) and alkali fusion-assisted hydrothermal method (AFH) were evaluated for the preparation of zeolites from waste basalt powder by using NaOH as the activation reagent in this study. The synthesized products were characterized by BET, XRD, FTIR and SEM. The effects of acid treatment, alkali/basalt ratio, calcination temperature and crystallization temperature on the synthesis process were studied. The results showed that AFH successfully synthesized zeolite X with higher crystallinity and no zeolite was formed by TH. The specific surface area of synthetic zeolite X was 486.46 m²·g⁻¹, which was much larger than that of original basalt powder (12.12 m²·g⁻¹). Acid treatment and calcination temperature had no effect on zeolite types, but acid treatment improved the yield and quality of zeolite. Alkali/basalt ratio and crystallization temperature not only affected the crystallinity of synthesized zeolites but also affected its type. The optimum synthesis condition of zeolite X are as follows: acid treatment of 5 wt% HCl solution, NaOH/basalt ratio of 1:1, a calcination temperature of 650 °C and crystallization temperature of 120 °C. The work shows that basalt can be used as a raw material to prepare zeolite.

Preparation of sulfhydryl functionalized magnetic SBA-15 and its high-efficiency adsorption on uranyl ion in solution

A novel assembly method was used to prepare the sulfhydryl functionalized magnetic SBA-15 (SH-M-SBA-15). The physicochemical properties of SH-M-SBA-15 were characterized by TEM, XRD, EDS, FT-IR, BET, and VSM. Batch adsorption experiments were conducted to investigate the influence of initial uranium concentration, dosage of adsorbent, pH values, contact time, and temperature on the adsorption efficiency and behaviors. The adsorption types were analyzed from the aspects of kinetic, isotherms, and thermodynamic. The results show that the specific surface area of SH-M-SBA-15 is 316.67 m²/g, which is smaller than that of SBA-15 (692.18 m²/g). However, compared with SBA-15, SH-M-SBA-15 has more surface sulfhydryl functional groups. The addition of this group can improve the adsorption of uranyl ions by SH-M-SBA-15. The optimal adsorption conditions were adsorption dosage 40 mg/L, pH 6, temperature 35 °C, contact time 180 min, and initial uranium concentration 35 mg/L. Under this condition, the maximum adsorption amount of uranyl ion by SH-M-SBA-15 can reach 804.79 mg/g, which is much higher than the highest adsorption capacity of uranyl ion by SBA-15 (146.23 mg/g). The adsorption process was better depicted by the Langmuir isotherm model. The process was consistent with the quasi-second-order model. ΔG was negative and ΔH was positive, indicating spontaneous and endothermic adsorption.