AloeVera as an effective biosorbent for the removal of thorium and barium from aqueous solutions

Bisphenol A adsorption using modified aloe vera leaf-wastes derived bio-sorbents from aqueous solution: kinetic, isotherm, and thermodynamic studies

Reactive-oxygen-species are produced more often in the body when bisphenol A (BPA), an endocrine-disrupting-substance, is present. In this investigation, bio-sorbents from an aqueous solution adapted from Aloe-vera were used to survey BPA removal. Aloe-vera leaf wastes were used to create activated carbon, which was then analyzed using Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Zeta potential, and Brunauer-Emmett-Teller (BET) techniques. It was revealed that the adsorption process adheres to the Freundlich isotherm model with R2>0.96 and the pseudo-second-order kinetic model with R2>0.99 under ideal conditions (pH = 3, contact time = 45 min, concentration of BPA = 20 mg.L-1, and concentration of the adsorbent = 2 g.L-1). After five-cycle, the efficacy of removal was greater than 70%. The removal of phenolic-chemicals from industrial-effluent can be accomplished with the assistance of this adsorbent in a cost-effective and effective-approach.

Bimetallic (Ag and MgO) nanoparticles, Aloe vera extracts loaded xanthan gum nanocomposite for enhanced antibacterial and in-vitro wound healing activity

We prepared nanocomposite (XG-AVE-Ag/MgO NCs) using the bimetallic Ag/MgO NPs, Aloe vera extract (AVE), and biopolymer (Xanthan gum (XG)) to archive a synergetic antibacterial and wound healing activity. The changes in XRD peaks at 20° of XG-AVE-Ag/MgO NCs indicated the XG encapsulation. The XG-AVE-Ag/MgO NCs showed the zeta potential and zeta size of 151.3 ± 3.14 d·nm and -15.2 ± 1.08 mV with a PDI of 0.265 while TEM showed an average size of 61.19 ± 3.89. The EDS confirmed the co-existence of Ag, Mg, carbon, oxygen, and nitrogen in NCs. XG-AVE-Ag/MgO NCs displayed higher antibacterial activity in terms of zone of inhibition, at 15.00 ± 0.12 mm for B. cereus and 14.50 ± 0.85 mm for E. coli. Moreover, NCs exhibited MICs of 2.5 μg/mL for E. coli, and 0.62 μg/mL for B. cereus. The in vitro cytotoxicity and hemolysis assays indicated the non-toxic properties of XG-AVE-Ag/MgO NCs. The higher wound closure activity was observed with the treatment of XG-AVE-Ag/MgO NCs (91.19 ± 1.87 %) compared to the control, untreated group (68.68 ± 3.54 %) at 48 h of incubation. These findings revealed that XG-AVE-Ag/MgO NCs was promising non-toxic, antibacterial, and wound-healing agent that deserved further in-vivo studies.

WITHDRAWN: Heavy metal ions and dyes removal from aqueous solution using Aloevera-based biosorbent: A systematic review

This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been withdrawn at the request of the authors, editor and publisher. The publisher regrets that an error occurred which led to the premature publication of this paper. The publisher apologizes to the readers for this unfortunate erro

Humic acid attachment on chitosan-modified silica gel as an economical, efficient, and selective adsorbent for thorium and uranium removal

A novel, low-cost adsorbent material was prepared by the immobilization of humic acid on a silica gel surface coated with cross-linked chitosan (SiChiHA). The adsorbent was developed to remove selectively of Th(IV) and U(VI) from aqueous solution, including their pre-concentration and separation from lanthanides and high salinity conditions. A simple waste-less humic acid immobilization method was shown to be successful based on FT-IR, SEM-EDS, and zeta potential characterization results. The adsorbent was found to be stable over a wide pH range, with the highest capacities obtained at pH 3.5 (Th(IV)) and pH 5 (U(VI)). Langmuir model calculations yielded a maximum capacity of 30.6 mg g^-1 and 75.4 mg g^-1 for Th(IV) and U(VI). The adsorption process was found to be rapid (half concentration was removed within 10 min) and best described by a pseudo-second order rate equation. Increasing NaCl concentration up to 2 mol L^-1 or lanthanide concentration up to 100 times did not significantly affect the removal efficiency for either Th(IV) of U(VI). Both elements could be sequentially separated by elution with ammonium citrate and nitric acid, respectively. The adsorption-desorption experiment showed that the adsorbent could be used for at least five cycles without significant capacity loss. This study provides insight into the development of low-cost adsorbent with practical functionality, including separation and regeneration ability, the advantageous properties scarcely reported in low-cost adsorbent literature.

Aloe Vera Functionalized Magnetic Nanoparticles Entrapped Ca Alginate Beads as Novel Adsorbents for Cu(II) Removal from Aqueous Solutions

CABs (Ca alginate beads), AVCABs (Aloe vera Ca alginate beads), and AVMNCABs (Aloe-vera functionalized magnetic nanoparticles entrapped Ca alginate beads) were developed as adsorbents for the removal of Cu(II) from aqueous solutions. The materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, high-resolution scanning electron microscopic (HR-SEM) analysis, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, and a vibrating-sample magnetometer (VSM). The effect of several parameters, such as pH, time, temperature, adsorbent dose, etc., were investigated. The adsorption isotherm of Cu(II) was adjusted best to the Langmuir model. The maximum adsorption capacities were 111.11 mg/g, 41.66 mg/g, and 15.38 mg/g for AVMNCABs, AVCABs, and CABs, respectively. The study of the adsorption kinetics for Cu(II) ions on beads followed a pseudo-second-order kinetic model, with a very good correlation in all cases. The adsorption studies used a spectrophotometric method, dealing with the reaction of Cu(II) with KSCN and variamine blue.

Aloe vera as Promising Material for Water Treatment: A Review

Aloe vera plant offers a sustainable solution for the removal of various pollutants from water. Due to its chemical composition, Aloe vera has been explored as coagulant/flocculant and biosorbent for water treatment. Most of the used materials displayed significant pollutants removals depending on the used preparation methods. AV-based materials have been investigated and successfully used as coagulant/flocculant for water treatment at laboratory scale. Selected AV-based materials could reduce the solids (total suspended solids (TSS), suspended solids (SS), total dissolved solids (TDS), and dissolved solids (DS)), turbidity, chemical oxygen demand (COD), biochemical oxygen demand (BOD), heavy metals, and color, with removal percentages varied depending on the coagulant/flocculant materials and on the wastewater characteristics. In the same context, AV materials can be used as biological flocculant for wastewater sludge treatment, allowing good solid–liquid separation and promoting sludge settling. Moreover, using different methods, AV material-based biosorbents were prepared and successfully used for pollutants (heavy metal dyes and phenol) elimination from water. Related results showed significant pollutant removal efficiency associated with an interesting adsorption capacity comparable to other biosorbents derived from natural products. Interestingly, the enzymatic system of Aloe vera (carboxypeptidase, glutathione peroxidase, and superoxide dismutase) has been exploited to degrade textile dyes. The obtained results showed high promise for removal efficiencies of various kinds of pollutants. However, results varied depending on the methodology used to prepare the Aloe vera based materials. Because of its valuable properties (composition, abundance, ecofriendly and biodegradable), Aloe vera may be useful for water treatment.

Physicochemical and Biological Performance of Aloe Vera-Incorporated Native Collagen Films

Collagen was obtained from porcine skin by mechanical pretreatments with the aim of preserving the triple helix structure of native collagen, which was indirectly corroborated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) results. Moreover, aloe vera (AV), with inherent biological properties, was incorporated into collagen film formulations, and films were prepared by compression and characterized to assess their suitability for biomedical applications. SEM images showed that the fibrillar structure of collagen changed to a rougher structure with the addition of AV, in accordance with the decrease in the lateral packaging of collagen chains observed by XRD analysis. These results suggested interactions between collagen and AV, as observed by FTIR. Considering that AV content higher than 20 wt % did not promote further interactions, this formulation was employed for biological assays and the suitability of AV/collagen films developed for biomedical applications was confirmed.

Removal of Barium from Solution by Natural and Iron(III) Oxide-Modified Allophane, Beidellite and Zeolite Adsorbents

Efficient capture of barium (Ba) from solution is a serious task in environmental protection and remediation. Herein, the capacity and the mechanism of Ba adsorption by natural and iron(III) oxide (FeO) modified allophane (ALO), beidellite (BEI) and zeolite (ZEO) were investigated by considering the effects of contact time, temperature, pH, Ba2+ concentration, adsorbent dosage, the presence of competitive ions and adsorption-desorption cycles (regenerability). Physicochemical and mineralogical properties of the adsorbents were characterized by XRD, FTIR, SEM with EDX and N2 physisorption techniques. The Ba2+ adsorption fitted to a pseudo-first-order reaction kinetics, where equilibrium conditions were reached within <30 min. BEI, ALO and ZEO with(out) FeO-modification yielded removal efficiencies for Ba2+ of up to 99.9%, 97% and 22% at optimum pH (pH 7.5-8.0). Adsorption isotherms fitted to the Langmuir model, which revealed the highest adsorption capacities for BEI and FeO-BEI (44.8 mg/g and 38.6 mg/g at 313 K). Preferential ion uptake followed in the order: Ba2+ > K+ > Ca2+ >> Mg2+ for all adsorbents; however, BEI and FeO-BEI showed the highest selectivity for Ba2+ among all materials tested. Barium removal from solution was governed by physical adsorption besides ion exchange, intercalation, surface complexation and precipitation, depending mainly on the absorbent type and operational conditions. BEI and FeO-BEI showed a high regenerability (>70-80% desorption efficiency after 5 cycles) and could be considered as efficient sorbent materials for wastewater clean-up.

Abdullah A, Ozoemena KI, Elzatahry A. Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism

Efficient approaches for toxic metal removal from wastewater have had transformative impacts to mitigating freshwater scarcity. Adsorption is among the most promising purification techniques due to its simplicity, low cost, and high removal efficiency at ambient conditions. MXene-based nanoarchitectures emerged as promising adsorbents in a plethora of toxic metal removal applications. This was due to the unique hydrophilicity, high surface area, activated metallic hydroxide sites, electron-richness, and massive adsorption capacity of MXene. Given the continual progress in the rational design of MXene nanostructures for water treatment, timely updates on this field are required that deeply emphasize toxic metal removal, including fabrication routes and characterization strategies of the merits, advantages, and limitations of MXenes for the adsorption of toxic metals (i.e., Pb, Cu, Zn, and Cr). This is in addition to the fundamentals and the adsorption mechanism tailored by the shape and composition of MXene based on some representative paradigms. Finally, the limitations of MXenes and their potential future research perspectives for wastewater treatment are also discussed. This review may trigger scientists to develop novel MXene-based nanoarchitectures with well-defined shapes, compositions, and physiochemical merits for efficient, practical removal of toxic metals from wastewater.