A new hydrothermal cross-linking ion-imprinted chitosan for high-efficiency uranium removal

Honeycomb-like macroporous crosslinked chitosan assisted EDTA-intercalated Ca-Mg-Al layered hydrotalcite composite foams for efficient U(VI) biosorption

The biosorption is considered to be highly efficient for the separation of radionuclide from radioactive wastewater. Herein, the crosslinked chitosan assisted EDTA intercalated Ca-Mg-Al layered double hydroxides composite foam (CS-EDTA-LDH) was synthesized by combining EDTA intercalation and freeze-drying methods. The macroporous and ultralight properties of CS-EDTA-LDH facilitates its rapid adsorption and facile recovery, and the inorganic/organic incorporation can avoid pore collapse and provide numerous adsorption sites, while the EDTA intercalation can enhance the complex capture of U(VI). The CS-EDTA-LDH presents various functional groups (carboxyl, hydroxyl and amino groups) for U(VI) adsorption, and the adsorption capacity for U(VI) reached 272.3 mg/g at pH 5.0 and 298 K. The adsorption kinetics of U(VI) conformed to PSO equation, whereas the isotherms conformed to the Freundlich model, indicating heterogeneous adsorption with diffusion process as a rate-controlling step. The thermodynamic parameters indicate that U(VI) adsorption by CS-EDTA-LDH is endothermic and spontaneous in nature. The adsorption mechanism is related to the synergic complexation by multi-functional groups, ion exchange, and possible isomeric substitution. Overall, CS-EDTA-LDH could be a promising biosorbent for the cleanup of radioactive pollution due to its high performance for U(VI) adsorption and facile recovery.

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Application of Poly(caffeic acid) for the Extraction of Critical Rare Earth Elements

Poly(caffeic acid) was synthesized and utilized for the extraction and determination of rare earth elements (REEs), thorium, and uranium. Oxidative polymerization of caffeic acid, a low-cost plant-based material, in the presence of ethylenediamine produced a granular, air-stable, and cross-linked polymer. The polymer is highly oxygenated and together with the amino group from ethylenediamine efficiently coordinates and preconcentrates these critical elements from aqueous media. Extraction was dependent on solution pH, amount of sorbent, and extraction time, while the concentration and flow rate of the desorption solution governed the recovery efficiency. Removal and recovery efficiencies greater than 98 and 90%, respectively, and low levels of detection ranging from 0.1 to 2.9 ng/L were achieved. Determination of these strategic elements in the presence of potentially interfering ions as well as in complex matrices such as well water and produced water samples also was demonstrated. The capacity of poly(caffeic acid) was determined with lanthanum as a representative REE to be 161.7 mg/g, establishing the promise of poly(caffeic acid) for larger-scale extractions in addition to the ability to screen sources for the presence of REEs.

The Separation of Chlorobenzene Compounds from Environmental Water Using a Magnetic Molecularly Imprinted Chitosan Membrane

In this work, a magnetic molecularly imprinted chitosan membrane (MMICM) was synthesized for the extraction of chlorobenzene compounds in environmental water using the membrane separation method. The optimal extraction amount for chlorobenzene (9.64 mg·L⁻¹) was found to be a 1:2 solid to liquid ratio, with a 20 min extraction time and 35 °C extraction temperature. This method proved to be successfully applied for the separation and trace quantification of chlorobenzene compounds in environmental water, with the limit of detection (LOD) (0.0016–0.057 ng·L⁻¹), limit of quantification (LOQ) (0.0026–0.098 ng·L⁻¹), and the recoveries ranging (89.02–106.97%).

Two-Dimensional Imprinting Strategy to Create Specific Nanotrap for Selective Uranium Adsorption with Ultrahigh Capacity

Uranium extraction is highly challenging because of low uranium concentration, high salinity, and a large number of competing ions in different environments. The template strategy is developed to address the defect of poor selectivity, but the adsorption capacity is limited by cavity blocking during the preparation of materials. Herein, a two-dimensional (2D) imprinting strategy is adopted to design 2D imprinted networks with specific nanotraps for effective uranium capture. The imprinted networks are established through the condensation polymerization of uranyl complexes, which are formed by aromatic building units coordinating with uranyl ions on the equatorial plane. Different from traditional imprinting materials that contain many invalid cavities (buried cavities or unreleased cavities), the as-prepared adsorbents possess tailored 2D nanotraps, which are open and specific to uranyl. Thus, the optimized networks not only show excellent selectivity for uranium (K_d = 964,500 mL/g in multi-ion solution) and slight disturbance of high salinity but also possess an ultrahigh adsorption capacity of 1365.7 mg/g. In addition, this adsorbent shows a high extraction efficiency for uranium under a wide range of pH conditions and exhibits good regeneration performance. This work proposes a pioneering strategy of 2D imprinting networks to capture uranium specifically with high capacity and can be applied to material design in many other fields.

Ion cross-linking assisted synthesis of ZIF-8/chitosan/melamine sponge with anti-biofouling activity for enhanced uranium recovery

A ZIF-8/chitosan/melamine sponge (CMZ8) uranium adsorbent was prepared using chitosan and zinc ions as adjuvants to achieve the integration of anti-fouling, adsorption and separation properties.

Ion-Imprinted Polymers: Synthesis, Characterization, and Adsorption of Radionuclides

Growing concern over the hazardous effect of radionuclides on the environment is driving research on mitigation and deposition strategies for radioactive waste management. Currently, there are many techniques used for radionuclides separation from the environment such as ion exchange, solvent extraction, chemical precipitation and adsorption. Adsorbents are the leading area of research and many useful materials are being discovered in this category of radionuclide ion separation. The adsorption technologies lack the ability of selective removal of metal ions from solution. This drawback is eliminated by the use of ion-imprinted polymers, these materials having targeted binding sites for specific ions in the media. In this review article, we present recently published literature about the use of ion-imprinted polymers for the adsorption of 10 important hazardous radionuclides-U, Th, Cs, Sr, Ce, Tc, La, Cr, Ni, Co-found in the nuclear fuel cycle.