Preparation and characterization of a novel spherical cellulose–copper(II) oxide composite particles: as a heterogeneous catalyst for the click reaction

Upcycling Food By-products: Characteristics and Applications of Nanocellulose

Rising global food prices and the increasing prevalence of food insecurity highlight the imprudence of food waste and the inefficiencies of the current food system. Upcycling food by-products holds significant potential for mitigating food loss and waste within the food supply chain. Food by-products can be utilized to extract nanocellulose, a material that has obtained substantial attention recently due to its renewability, biocompatibility, bioavailability, and a multitude of remarkable properties. Cellulose nanomaterials have been the subject of extensive research and have shown promise across a wide array of applications, including the food industry. Notably, nanocellulose possesses unique attributes such as a surface area, aspect ratio, rheological behavior, water absorption capabilities, crystallinity, surface modification, as well as low possibilities of cytotoxicity and genotoxicity. These qualities make nanocellulose suitable for diverse applications spanning the realms of food production, biomedicine, packaging, and beyond. This review aims to provide an overview of the outcomes and potential applications of cellulose nanomaterials derived from food by-products. Nanocellulose can be produced through both top-down and bottom-up approaches, yielding various types of nanocellulose. Each of these variants possesses distinctive characteristics that have the potential to significantly enhance multiple sectors within the commercial market.

Fast synthesis of [1,2,3]-triazole derivatives on a Fe/Cu-embedded nano-catalytic substrate

Triazoles are biologically important compounds that play a crucial role in biomedical applications. In this study, we present an innovative and eco-friendly nanocatalyst system for synthesizing compounds via the click reaction. The system is composed of Arabic gum (AG), iron oxide magnetic nanoparticles (Fe3O4 MNPs), (3-chloropropyl) trimethoxysilane (CPTMS), 2-aminopyridine (AP), and Cu(i) ions. Using AP as an anchor for Cu(i) ions and Fe3O4 MNPs allows facile separation using an external magnet. The hydrophilic nature of the Fe3O4@AG/AP-Cu(i) nanocomposite makes it highly efficient in water as a green solvent. The highest reaction efficiency (95.0%) was achieved in H2O solvent with 50.0 mg of nanocatalyst for 60 min at room temperature. The reaction yield remained consistent for six runs, demonstrating the stability and effectiveness of the catalyst.

Mesoporous epoxidized soybean oil-supported copper-based magnetic nanocatalyst and amberlite-supported azide as a green and efficient catalytic system for 1,2,3-triazole synthesis

A new green mesoporous magnetically heterogeneous catalyst was prepared by the copper immobilization onto magnetic epoxidized soybean oil as a nano bio-support and was utilized for the synthesis of 1,4-disubstituted-1,2,3-triazole derivatives in the presence of amberlite supported azide. A great range of triazole derivatives were synthesized from benzyl halides or epoxides halides in high yields at the room temperature. The catalyst was characterized by various techniques such as FT-IR, XRD, VSM, FE-SEM, EDX, TEM, BET, TGA, and ICP analysis. This catalytic system can be reused for five times without any significant decrease in the catalytic activity. Fe3O4@SiO-ESBO/CuO nanocatalyst and amberlite supported azide as a green catalytic system has been used for the regioselective synthesis of triazole derivatives in water. A large range of triazole derivatives were synthesized from benzyl halides or epoxides in high yields.

Cellulose nanosphere: Preparation and applications of the novel nanocellulose

Over the past few years, cellulose nanosphere (CNS) has gained growing attention and rapid development. As a new type of nanocellulose materials, CNS can be prepared from native cellulose by using methods which have been adopted extensively to prepare the well-known nanocelluloses, i.e., cellulose nanofiber and cellulose nanocrystal. The particular interest is that the regenerated cellulose and mercerized cellulose can also be used as important feedstocks to produce CNS. In this review, the preparation methods of CNS are described and discussed, via both top-down processes, including chemical, mechanical, and enzymolysis ones, and bottom-up processes by using various cellulose I and II starting materials. This review also highlights the researches relative to cellulose composite nanospheres, and summarizes the applications of spherical cellulose-based nanoparticles. Finally, the future challenges and opportunities of CNS are prospected in this work.

Autotrophic Acetate Production under Hydrogenophilic and Bioelectrochemical Conditions with a Thermally Treated Mixed Culture

Bioelectrochemical systems are emerging technologies for the reduction in CO₂ in fuels and chemicals, in which anaerobic chemoautotrophic microorganisms such as methanogens and acetogens are typically used as biocatalysts. The anaerobic digestion digestate represents an abundant source of methanogens and acetogens microorganisms. In a mixed culture environment, methanogen’s inhibition is necessary to avoid acetate consumption by the presence of acetoclastic methanogens. In this study, a methanogenesis inhibition approach based on the thermal treatment of mixed cultures was adopted and evaluated in terms of acetate production under different tests consisting of hydrogenophilic and bioelectrochemical experiments. Batch experiments were carried out under hydrogenophilic and bioelectrochemical conditions, demonstrating the effectiveness of the thermal treatment and showing a 30 times higher acetate production with respect to the raw anaerobic digestate. Moreover, a continuous flow bioelectrochemical reactor equipped with an anion exchange membrane (AEM) successfully overcomes the methanogens reactivation, allowing for a continuous acetate production. The AEM membrane guaranteed the migration of the acetate from the biological compartment and its concentration in the abiotic chamber avoiding its consumption by acetoclastic methanogenesis. The system allowed an acetate concentration of 1745 ± 30 mg/L in the abiotic chamber, nearly five times the concentration measured in the cathodic chamber.

Self-Catalyzed Sensitization of CuO Nanowires via a Solvent-free Click Reaction

Recent advances in organic surface sensitization of metal oxide nanomaterials focused on two-step approaches with the first step providing a convenient functionalized chemical "hook", such as an alkyne functionality connected to a carboxylic group in prop-2-ynoic acid. The second step then took advantage of copper-catalyzed click chemistry to deliver the desired structure (such as benzyl or perylene) attached to an azide to react with the surface-bound alkyne. The use of this approach on CuO not only resulted in a successful morphology preserving chemical modification but also has demonstrated that surface Cu(I) can be obtained during the process and promote a surface-catalyzed click reaction without additional copper catalyst. Here, it is demonstrated that this surface-catalyzed chemistry can be performed on a surface of the CuO nanomaterial without a solvent, as a "dry click" reaction, as confirmed with spectroscopic and microscopic investigations with X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, solid-state nuclear magnetic resonance, and scanning electron microscopy. Computational studies provided instructive information on the interaction between the surface prop-2-yonate and azide functional group to better understand the mechanism of this surface-catalyzed click reaction.

Carboxymethyl cellulose nanocomposite beads as super-efficient catalyst for the reduction of organic and inorganic pollutants

Carboxymethyl cellulose/copper oxide-nickel oxide (CMC/CuO-NiO) nanocomposite beads were prepared by facile, simple and environmentally friendly method. Initially, CuO-NiO was prepared and applied for the catalytic reduction of 4-nitrophenol (4-NP). The results showed that CuO-NiO demonstrate high catalytic activity toward the reduction of 4-NP to 4-aminophenol (4-AP) with a rate constant of 2.97 × 10^-2 s^-1. Further, CuO-NiO were well-dispersed in the polymeric matrix of carboxymethyl cellulose to prepare CMC/CuO-NiO beads. CMC/CuO-NiO nanocomposite beads were also applied to catalyze the reduction of potassium ferrocyanide (K₃Fe (CN)₆), 4-NP, Congo red (CR) and Eosin yellow (EY) in the presence of sodium borohydride. Experimental data indicated that CMC/CuO-NiO nanocomposite has higher catalytic activity and high rate constant compared to CuO-NiO. The rate constant found to be 6.88 × 10^-2, 6.27 × 10^-2, 1.89 × 10^-2 and 2.43 × 10^-2 for K₃Fe(CN)₆, 4-NP, CR and EY, respectively, using 5 mg CMC/CuO-NiO beads. FE-SEM, EDX, FTER, XRD and XPS were used to characterize the nanocomposites. CMC/CuO-NiO beads catalytically reduced up to 95-99% of K₃Fe(CN)₆, 4-NP, CR and EY within 40, 60, 120 and 120 s. CMC/CuO-NiO beads were found more selective for the reduction of 4-NP. The catalytic reduction performance of CMC/CuO-NiO beads was optimized by studying the influence of different parameters on the catalytic reduction of 4-NP. Hence, the effective and super catalytic performance toward the reduction of different organic and inorganic pollutants makes CMC/CuO-NiO beads a smart material and suitable for numerous scientific and industrial applications and may be used as an alternative to high-cost commercial catalysts.

A facile green synthesis of MgCoFe2O4 nanomaterials with robust catalytic performance in the synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives

In this study, an efficient, rapid and simple plant-mediated green sol-gel auto-combustion procedure was presented to synthesis magnesium-cobalt ferrite (MgCoFe₂O₄) nanocatalyst using an aqueous extract of apple skins as a chelating/combustion agent. The catalyst was assessed by multiple techniques, including FT-IR, XRD, FE-SEM, EDS, elemental mapping, TGA-DTA and VSM. Then, the catalytic potential of the as-prepared MgCoFe₂O₄ nanocatalyst was examined in the three-component condensation reaction of 1,3-dimethyl barbituric acid, aldehydes and malononitrile for the one-pot synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives. The obtained results indicated the excellent catalytic activity of the MgCoFe₂O₄ in the three-component reaction. The high catalytic activity of these nanomaterials could be attributed to the synergistic electronic effect between nanoparticles, which showcased the enormous potential of multi-metallic nanomaterials in the catalysis field. More importantly, MgCoFe₂O₄ showed excellent magnetic properties, and it could be successfully separated and recovered by applying an external magnetic for further reuses. To the best of our knowledge, green synthesis of MgCoFe₂O₄ mediated by aqueous plant extract was reported here for the first time, and this work, therefore, can open up a new insight in the course of design, green synthesis and application of excellent green nanocatalyst for the sustainable processes. MgCoFe₂O₄ as a magnetically recyclable heterogeneous catalyst, has been synthesized through plant-mediated procedure using an aqueous extract of apple skins.

Synthesis and characterization of a supported Pd complex on volcanic pumice laminates textured by cellulose for facilitating Suzuki-Miyaura cross-coupling reactions

Herein, a novel high-performance heterogeneous catalytic system made of volcanic pumice magnetic particles (VPMP), cellulose (CLS) natural polymeric texture, and palladium nanoparticles (Pd NPs) is presented. The introduced VPMP@CLS-Pd composite has been designed based on the principles of green chemistry, and suitably applied in the Suzuki-Miyaura cross-coupling reactions, as an efficient heterogeneous catalytic system. Concisely, the inherent magnetic property of VPMP (30 emu g-1) provides a great possibility for separation of the catalyst particles from the reaction mixture with great ease. In addition, high heterogeneity and high structural stability are obtained by this composition resulting in remarkable recyclability (ten times successive use). As the main catalytic sites, palladium nanoparticles (Pd NPs) are finely distributed onto the VPMP@CLS structure. To catalyze the Suzuki-Miyaura cross-coupling reactions producing biphenyl pharmaceutical derivatives, the present Pd NPs were reduced from chemical state Pd2+ to Pd0. In this regard, a plausible mechanism is submitted in the context as well. As the main result of the performed analytical methods (including FT-IR, EDX, VSM, TGA, FESEM, TEM, BTE, and XPS), it is shown that the spherical-shaped nanoscale Pd particles have been well distributed onto the surfaces of the porous laminate-shaped VPMP. However, the novel designed VPMP@CLS-Pd catalyst is used for facilitating the synthetic reactions of biphenyls, and high reaction yields (∼98%) are obtained in a short reaction time (10 min) by using a small amount of catalytic system (0.01 g), under mild conditions (room temperature).