Click Chemistry with Polymers, Dendrimers, and Hydrogels for Drug Delivery

Advances in Hydrogel-Based Drug Delivery Systems

Hydrogels, with their distinctive three-dimensional networks of hydrophilic polymers, drive innovations across various biomedical applications. The ability of hydrogels to absorb and retain significant volumes of water, coupled with their structural integrity and responsiveness to environmental stimuli, renders them ideal for drug delivery, tissue engineering, and wound healing. This review delves into the classification of hydrogels based on cross-linking methods, providing insights into their synthesis, properties, and applications. We further discuss the recent advancements in hydrogel-based drug delivery systems, including oral, injectable, topical, and ocular approaches, highlighting their significance in enhancing therapeutic outcomes. Additionally, we address the challenges faced in the clinical translation of hydrogels and propose future directions for leveraging their potential in personalized medicine and regenerative healthcare solutions.

Controlled Sr(ii) ion release from in situ crosslinking electroactive hydrogels with potential for the treatment of infections

The development of electrochemical stimuli-responsive drug delivery systems is of both academic and industrial interest due to the ease with which it is possible to trigger payload release, providing drug delivery in a controllable manner. Herein, the preparation of in situ forming hydrogels including electroactive polypyrrole nanoparticles (PPy-NPs) where Sr2+ ions are electrochemically loaded for electrically triggered release of Sr2+ ions is reported. The hydrogels were characterized by a variety of techniques including Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), cyclic voltammetry (CV), etc. The cytocompatibility towards human mesenchymal stem cells (MSCs) and fibroblasts were also studied. The Sr2+ ion loaded PEC-ALD/CS/PPy-NPs hydrogel showed no significant cytotoxicity towards human mesenchymal stem cells (MSCs) and fibroblasts. Sr2+ ions were electrochemically loaded and released from the electroactive hydrogels, and the application of an electrical stimulus enhanced the release of Sr2+ ions from gels by ca. 2-4 fold relative to the passive release control experiment. The antibacterial activity of Sr2+ ions against E. coli and S. aureus was demonstrated in vitro. Although these prototypical examples of Sr2+ loaded electroactive gels don't release sufficient Sr2+ ions to show antibacterial activity against E. coli and S. aureus, we believe future iterations with optimised physical properties of the gels will be capable of doing so.

Polysaccharides-Based Injectable Hydrogels: Preparation, Characteristics, and Biomedical Applications

Polysaccharides-based injectable hydrogels are a unique group of biodegradable and biocompatible materials that have shown great potential in the different biomedical fields. The biomolecules or cells can be simply blended with the hydrogel precursors with a high loading capacity by homogenous mixing. The different physical and chemical crosslinking approaches for preparing polysaccharide-based injectable hydrogels are reviewed. Additionally, the review highlights the recent work using polysaccharides-based injectable hydrogels as stimuli-responsive delivery vehicles for the controlled release of different therapeutic agents and viscoelastic matrix for cell encapsulation. Moreover, the application of polysaccharides-based injectable hydrogel in regenerative medicine as tissue scaffold and wound healing dressing is covered.

Copper-Free Click Chemistry: Applications in Drug Delivery, Cell Tracking, and Tissue Engineering

Traditionally, organic chemical reactions require organic solvents, toxic catalysts, heat, or high pressure. However, copper-free click chemistry has been shown to have favorable reaction rates and orthogonality in water, buffer solutions, and physiological conditions without toxic catalysts. Strain-promoted azide-alkyne cycloaddition and inverse electron-demand Diels-Alder reactions are representative of copper-free click chemistry. Artificial chemical reactions via click chemistry can also be used outside of the laboratory in a controllable manner on live cell surfaces, in the cytosol, and in living bodies. Consequently, copper-free click chemistry has many features that are of interest in biomedical research, and various new materials and strategies for its use have been proposed. Herein, recent remarkable trials that have used copper-free click chemistry are described, focusing on their applications in molecular imaging and therapy. The research is categorized as nanoparticles for drug delivery, imaging agents for cell tracking, and hydrogels for tissue engineering, which are rapidly advancing fields based on click chemistry. The content is based primarily on the experience with click chemistry-based biomaterials over the last 10 years.

RAFT-Based Polymers for Click Reactions

The parallel development of reversible deactivation radical polymerization and click reaction concepts significantly enriches the toolbox of synthetic polymer chemistry. The synergistic effect of combining these approaches manifests itself in a growth of interest to the design of well-defined functional polymers and their controlled conjugation with biomolecules, drugs, and inorganic surfaces. In this review, we discuss the results obtained with reversible addition–fragmentation chain transfer (RAFT) polymerization and different types of click reactions on low- and high-molar-mass reactants. Our classification of literature sources is based on the typical structure of macromolecules produced by the RAFT technique. The review addresses click reactions, immediate or preceded by a modification of another type, on the leaving and stabilizing groups inherited by a growing macromolecule from the chain transfer agent, as well as on the side groups coming from monomers entering the polymerization process. Architecture and self-assembling properties of the resulting polymers are briefly discussed with regard to their potential functional applications, which include drug delivery, protein recognition, anti-fouling and anti-corrosion coatings, the compatibilization of polymer blends, the modification of fillers to increase their dispersibility in polymer matrices, etc.

Ronald C.D. Breslow (1931-2017): A career in review

Reviewed herein are key research accomplishments of Professor Ronald Charles D. Breslow (1931-2017) throughout his more than 60 year research career. These accomplishments span a wide range of topics, most notably physical organic chemistry, medicinal chemistry, and bioorganic chemistry. These topics are reviewed, as are topics of molecular electronics and origin of chirality, which combine to make up the bulk of this review. Also reviewed briefly are Breslow's contributions to the broader chemistry profession, including his work for the American Chemical Society and his work promoting gender equity. Throughout the article, efforts are made to put Breslow's accomplishments in the context of other work being done at the time, as well as to include subsequent iterations and elaborations of the research.

Photoinduced Porcine Gelatin Cross-Linking by Homobi- and Homotrifunctional Tetrazoles

Gelatin is a costless polypeptide material of natural origin, able to form hydrogels that are potentially useful in biomaterial scaffold design for drug delivery, cell cultures, and tissue engineering. However, gelatin hydrogels are unstable at physiological conditions, losing their features only after a few minutes at 37 °C. Accordingly, treatments to address this issue are of great interest. In the present work, we propose for the first time the use of bi- and trifunctional tetrazoles, most of them unknown to date, for photoinduced gelatin cross-linking towards the production of physiologically stable hydrogels. Indeed, after UV-B irradiation, aryl tetrazoles generate a nitrilimine intermediate that is reactive towards different functionalities, some of them constitutively present in the amino acid side chains of gelatin. The efficacy of the treatment strictly depends on the structure of the cross-linking agent used, and substantial improved stability was observed by switching from bifunctional to trifunctional cross-linkers.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Disulfide-yne reaction: controlling the reactivity of a surface by light

In this paper we provide new insight into the disulfide–yne photo reaction, which is similar but different from the well-known thiol–yne photoclick reaction. We show that, unlike the stable product generated from thiol–yne chemistry, the vinyl dithioether structure obtained from disulfide–yne reaction exhibits unique reactivity with thiols and disulfides, which can be used for surface photochemistry to fabricate reactive and dynamic surfaces. The possible mechanism for the unique reactivity of vinyl dithioether structure was discussed. We demonstrated that disulfide–yne reactions are highly compatible with thiol–yne chemistry, but offer the flexibility and dynamic nature that is lacking in thiol–yne chemistry, thus could be a good replenishment for the existing thiol–yne toolbox.

The interesting disulfide–alkyne chemistry provides the kinetics of the widely used thiol–alkyne chemical reaction.

Synthesis and Operating Optimization of the PEG Conjugate via CuAAC in scCO2

A new sustainable green protocol for obtaining polyethylene glycol (PEG) conjugates, with a prototype molecule, which in this work was coumarin, by means of click chemistry is presented. The organic solvents commonly used for this type of reaction were replaced by supercritical carbon dioxide (scCO₂). The synthesis and characterization of PEG-coumarin were successfully reported using FTIR, ¹H NMR, and MALDI TOF. Subsequently, a preliminary study was carried out using the response surface methodology to examine the variables that most affect the use of scCO₂ as a reaction medium. The main effects caused by these variables, individually and their binary interaction, have been estimated. The response surface methodology has been used in this work to screen variables using a factorial design 2³. The p-values of temperature and pressure were 0.006 and 0.0117, being therefore the most significant variables of the response surface methodology study. Subsequently, a more intensive study has been carried out on the variables that have shown the greatest significant effect on reaction performance where an 82.32% synthesis success was achieved, which broadens the scope of the use of scCO₂ as a reaction medium. The conjugated coumarin with mPEG-alkyne and coumarin were evaluated for their in vitro antioxidant activities by the DPPH radical scavenging assay and were found to exhibit substantial activities. The click product showed comparable or even better efficacy than the initial coumarin.

Peptide-Modified Biopolymers for Biomedical Applications

Polymeric biomaterials have been used in a variety of applications, like cargo delivery and tissue scaffolding, because they are easily synthesized and can be adapted to many systems. However, there is still a need to further enhance and improve their functions to progress their use in the biomedical field. A promising solution is to modify the polymer surfaces with peptides that can increase biocompatibility, cellular interactions, and receptor targeting. In recent years, peptide modifications have been used to overcome many challenges to polymer biomaterial development. This review discusses recent progress in developing peptide-modified polymers for therapeutic applications including cell-specific targeting and tissue engineering. Furthermore, we will explore some of the most frequently studied base components of these biomaterials.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Supramolecular dendrimer-containing layer-by-layer nanoassemblies for bioapplications: current status and future prospects

This review provides a comprehensive and critical overview of the supramolecular dendrimer-containing multifunctional layer-by-layer nanoassemblies driven by a multitude of intermolecular interactions for biological and biomedical applications.

Ex vivo identification of circulating tumor cells in peripheral blood by fluorometric "turn on" aptamer nanoparticles

The detection of the circulating tumor cells (CTCs) detached from solid tumors has emerged as a burgeoning topic for cancer diagnosis and treatment. The conventional CTC enrichment and identification mainly rely on the specific binding of the antibodies on the capture interface of the magnetic nanoparticles with the corresponding biomarkers on the cell membranes. However, these methods could easily generate false-negative results due to the extremely low concentration of CTCs and the internal heterogeneity of the tumor cells. Herein, with the aim of selectively identifying CTCs and improving the detection accuracy in peripheral blood, we designed the fluorometric "turn on" Au nanoparticles (DHANs) with the modification of a tumor-targeted moiety, dehydroascorbic acid (DHA) and a fluorometric aptamer, which could be "switched-on" by an over-expressed intracellular protein, namely hypoxia-inducible factor-1α (HIF 1α). This novel nanoformulated detection platform demonstrated the great capacity for visualizing various CTCs in peripheral blood with significantly improved detection efficiency and sensitivity. As a result, the nanoplatform has a great potential to be further applied for CTC detection in vitro or in vivo, which holds promise for extensive CTC studies.

Efficient polymer dimerization method based on self-accelerating click reaction

An efficient polymer dimerization method is developed on a self-accelerating double strain-promoted azide–alkyne cycloaddition (DSPAAC) click reaction. In this approach, varied polymer dimers can be efficiently prepared by coupling azide terminated polymer building blocks by sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) small linkers. The distinct advantages of this method can be summarized as follows. First, the azide terminated polymer building blocks can be easily prepared with varied molecular topologies such as linear, star, and dendritic shapes. Second, the self-accelerating property of DSPAAC coupling reaction allows the method to efficiently prepare pure polymer dimers in the presence of excess molar amounts of DIBOD small linkers to azide-terminated polymer building blocks. Third, the click property of DSPAAC coupling reaction facilitates the dimerization reaction with a very mild ambient reaction condition. As a result, this method provides a powerful tool to fabricate topological polymers with a symmetrical molecular structure such as block, star, and dendritic polymers.

A convenient and efficient method was developed to prepare topological polymers with a symmetric molecular structure by dimerizing azide terminated polymers based on the self-accelerating double strain-promoted azide–alkyne cycloaddition reaction.

Utilization of click chemistry to study the effect of poly(ethylene)glycol molecular weight on the self-assembly of PEGylated gambogic acid nanoparticles for the treatment of rheumatoid arthritis

Click chemistry was used to study the effect of varied PEG molecular weights on the self-assembly of PEG-gambogic acid (GA) conjugates into nanoparticles.

Influence of the cis/trans configuration on the supramolecular aggregation of aryltriazoles

The ability of trans- and cis-1,2-glucopyranosyl and cyclohexyl ditriazoles, synthesized by CuAAC "click" chemistry, to form gels was studied, their physical properties determined, and the self-aggregation behavior investigated by SEM, X-ray, and EDC studies. The results revealed that self-assembly was driven mainly by π-π stacking interactions, in addition to hydrogen bonding, with the aromatic rings adopting a high degree of parallelism, as seen in crystal packings and ECD data. Furthermore, π-bromine interactions between the bromine atom of the aryl substituents and the triazole units might also contribute to an overall stabilization of the supramolecular aggregation of bis(4-bromophenyl)triazoles. The trans or cis spatial disposition of the triazole rings is highly important for gelation, with the cis configuration having higher propensity.

In Situ Crosslinking Bionanocomposite Hydrogels with Potential for Wound Healing Applications

In situ forming hydrogels are a class of biomaterials that can fulfil a variety of important biomedically relevant functions and hold promise for the emerging field of patient-specific treatments (e.g., cell therapy, drug delivery). Here we report the results of our investigations on the generation of in situ forming hydrogels with potential for wound healing applications (e.g., complex blast injuries). The combination of polysaccharides that were oxidized to display aldehydes, amine displaying chitosan and nanostructured ZnO yields in situ forming bionanocomposite hydrogels. The physicochemical properties of the components, their cytotoxicity towards HaCat cells and the in vitro release of zinc ions on synthetic skin were studied. The in situ gel formation process was complete within minutes, the components were non-toxic towards HaCat cells at functional levels, Zn²⁺ was released from the gels, and such materials may facilitate wound healing.

Biomedical applications of copper-free click chemistry: in vitro, in vivo, and ex vivo

Recently, click chemistry has provided important advances in biomedical research fields. Particularly, copper-free click chemistry including strain-promoted azide-alkyne cycloaddition (SPAAC) and inverse-electron-demand Diels-Alder (iEDDA) reactions enable fast and specific chemical conjugation under aqueous conditions without the need for toxic catalysts. Click chemistry has resulted in a change of paradigm, showing that artificial chemical reactions can occur on cell surfaces, in cell cytosol, or within the body, which is not easy with most other chemical reactions. Click chemistry in vitro allows specific labelling of cellular target proteins and studying of drug target engagement with drug surrogates in live cells. Furthermore, cellular membrane lipids and proteins could be selectively labelled with click chemistry in vitro and cells could be adhered together using click chemistry. Click chemistry in vivo enables efficient and effective molecular imaging and drug delivery for diagnosis and therapy. Click chemistry ex vivo can be used to develop molecular tools to understand tissue development, diagnosis of diseases, and therapeutic monitoring. Overall, the results from research to date suggest that click chemistry has emerged as a valuable tool in biomedical fields as well as in organic chemistry.

Click-Engineered, Bioresponsive, and Versatile Particle-Protein-Dye System

We present a multifunctional polymer based nanoparticle platform for personalized nanotheranostic applications, which include photodynamic therapy and active targeting. In this system, poly(propargyl acrylate) (PA) particles were surface-modified with organic ligands and fluorophores (the payload) through an environmentally-sensitive linker. An azide modified bovine serum albumin (azBSA) was employed as the linker. This system prevents opsonization and, upon digestion, releases the payload. Attachment of the emitting payload to the particle through azide-modified bovine serum albumin (BSA) quenches emission, which can be again activated with digestion of the azBSA. The emission "turn-on" at a specific location will increase the signal-to-noise ratio. By utilizing human head and neck squamous carcinoma cells (UMSCC22A), photodynamic therapy studies with these particles gave promising reductions in cell growth. Additionally, the particle-protein-dye system is versatile as different fluorophores (such as silicon phthalocyanine or cyanine 3) can be attached to the protein and the same activation/deactivation behavior is observed. Active targeting can be employed to enhance the concentration of the payload in the designated tumor. Human lung carcinoma cells (A549) were utilized in toxicity studies where PA-azBSA particles were modified with a Survivin targeting ligand and indicated an enhanced cell death with the modified particles relative to the "free" Survivin targeting ligand.

Bio-based Catalysts from Biomass Issued after Decontamination of Effluents Rich in Copper—an Innovative Approach towards Greener Copper-based Catalysis

The abundance of Cu-contaminated effluents and the serious risk of contamination of the aquatic systems combine to provide strong motivating factors to tackle this environmental problem. The treatment of polluted effluents by rhizofiltration and biosorption is an interesting ecological alternative. Taking advantage of the remarkable ability of the selected plants to bioconcentrate copper into roots, these methods have been exploited for the decontamination of copperrich effluents. Herein, we present an overview on the utility of the resulted copper-rich biomass for the preparation of novel bio-sourced copper-based catalysts for copper-mediated reactions: from the bioaccumulation of copper in plant, to the preparation and full analysis of the new Eco-Cu catalysts, and their application in selected key reactions. The hydrolysis of a thiophosphate, an Ullmanntype coupling leading to N- and O-arylated compounds, and a CuAAC “click” reaction, all performed under green and environmentally friendly conditions, will be described.

Gelatin-Based Hydrogels through Homobifunctional Triazolinediones Targeting Tyrosine Residues

Gelatin is a biopolymer with interesting properties that can be useful for biomaterial design for different applications such as drug delivery systems, or 3D scaffolds for tissue engineering. However, gelatin suffers from poor mechanical stability at physiological temperature, hence methods for improving its properties are highly desirable. In the present work, a new chemical cross-linking strategy based on triazolinedione ene-type chemistry towards stable hydrogel is proposed. Two different homobifunctional 1,2,4-triazoline-3,5(4H)-diones, namely 4,4'-hexane-1,6-diylbis(3H-1,2,4-triazoline-3,5(4H)-dione) 1 and 4,4'-[methylenebis(4,1-phenylene)]bis(3H-1,2,4-triazoline-3,5(4H)-dione) 2 were used as cross-linkers in different ratio to tyrosine residues in gelatin. The reaction was proved effective in all experimented conditions and hydrogels featured with different thermal stability were obtained. In general, the higher the cross-linker/tyrosine ratio, the more thermostable the hydrogel. The swelling properties are strictly dependent upon the chemical nature of the cross-linker.

Novel vinyl-modified RGD conjugated silica nanoparticles based on photo click chemistry for in vivo prostate cancer targeted fluorescence imaging

Molecular imaging is a powerful tool for non-invasive visualization of tumors that plays an important role in their diagnosis and treatment. The specificity of molecular imaging probes for cancer cells is important for accurate tumor visualization, with antibody and polypeptide nanoprobe conjugates having often been used as targeting agents for tumor detection. However, many traditional chemical conjugation methods employ complex conjugation reactions that result in poor efficiency and poor bioactivity. Herein, we describe the use of photo click methodology for the rapid synthesis of nanoprobes comprised of silica nanoparticles functionalized with RGD targeting units (SiO₂@T1-RGDk NPs) (∼80 nm) for in vivo prostate cancer fluorescent imaging applications. These SiO₂@T1-RGDk NPs exhibit a maximum absorption wavelength of 380 nm in their UV absorption spectra with a maximum fluorescence emission wavelength of 550 nm. Confocal immunofluorescent imaging reveal that SiO₂@T1-RGDk NPs exhibit excellent targeting ability for visualizing cancer cells, with in vivo fluorescence imaging intensity in a subcutaneous tumor model of prostate cancer reaching a maxima after 4 h. Biosafety assessments showed that SiO₂@T1-RGDk NPs demonstrate no obvious toxicity in mice, thus demonstrated that these novel NPs may prove to be promising fluorescent imaging agents for the accurate detection and treatment of tumors.

Photo click chemistry has been used to prepare RGD conjugated silica nanoprobe (SiO₂@T1-RGDk NPs) that exhibits excellent tumor targeting ability and negligible toxicity which enables them to be used for the diagnosis and treatment of cancer.

Alginate/poly(amidoamine) injectable hybrid hydrogel for cell delivery

A covalently cross-linked injectable hybrid hydrogel, namely, alginate/poly(amidoamine) (PAMAM), with the objective of cell delivery was innovatively designed and synthesized using tetra-amino-functional PAMAM dendrimer as the cross-linker. With the increase in percentage of PAMAM cross-linker, the pore size and swelling ratio of hydrogels were in the range of 57 ± 18 μm to 88 ± 25 μm and 110 ± 16 to 157 ± 20, respectively. The study of attachment and proliferation of MC3T3-E1 pre-osteoblasts using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay through indirect and direct contact methods indicated a continuous increase in metabolically active live cells with time, implying non-cytotoxicity of the synthesized hydrogel. The live–dead assay showed >95% of live cells for alginate/PAMAM hydrogels, suggesting viability of the encapsulated cells. When the percentage of PAMAM cross-linker in alginate/PAMAM hydrogel was increased from 5 to 25, the percentage degradation rate decreased from 1.1 to 0.29%/day. Given that the poly(ethylene glycol) is commonly used cross-linker for hydrogel syntheses, we compared the behavior with poly(ethylene glycol). The incorporation of poly(ethylene glycol) in alginate/PAMAM hydrogel reduced the activity of MC3T3-E1 cells and their viability compared to the alginate/PAMAM hydrogels. The protonation of amino groups in alginate/PAMAM injectables under physiological conditions led to the formation of cationic hydrogels. These cationic hydrogels showed enhanced cell encapsulation and attachment ability because of electrostatic interaction with negatively charged cell surface as determined by cell adhesion and extensions from scanning electron microscope and vinculin assay and ability of in situ calcium phosphate mineralization. These observations point toward the potential use as an injectable scaffold for cell delivery and tissue engineering applications.

Polyvalent C-glycomimetics based on l-fucose or d-mannose as potent DC-SIGN antagonists

The C-type lectin DC-SIGN expressed on immature dendritic cells is a promising target for antiviral drug development. Previously, we have demonstrated that mono- and divalent C-glycosides based on d-manno and l-fuco configurations are promising DC-SIGN ligands. Here, we described the convergent synthesis of C-glycoside dendrimers decorated with 4, 6, 9, and 12 α-l-fucopyranosyl units and with 9 and 12 α-d-mannopyranosyl units. Their affinity against DC-SIGN was assessed by surface plasmon resonance (SPR) assays. For comparison, parent O-glycosidic dendrimers were synthesized and tested, as well. A clear increase of both affinity and multivalency effect was observed for C-glycomimetics of both types (mannose and fucose). However, when dodecavalent C-glycosidic dendrimers were compared, there was no difference in affinity regarding the sugar unit (l-fuco, IC₅₀ 17 μM; d-manno, IC₅₀ 12 μM). For the rest of glycodendrimers with l-fucose or d-mannose attached by the O- or C-glycosidic linkage, C-glycosidic dendrimers were significantly more active. These results show that in addition to the expected physiological stability, the biological activity of C-glycoside mimetics is higher in comparison to the corresponding O-glycosides and therefore these glycomimetic multivalent systems represent potentially promising candidates for targeting DC-SIGN.

Bioorthogonal strategies for site-directed decoration of biomaterials with therapeutic proteins

Emerging strategies targeting site-specific protein modifications allow for unprecedented selectivity, fast kinetics and mild reaction conditions with high yield. These advances open exciting novel possibilities for the effective bioorthogonal decoration of biomaterials with therapeutic proteins. Site-specificity is particularly important to the therapeutics' end and translated by targeting specific functional groups or introducing new functional groups into the therapeutic at predefined positions. Biomimetic strategies are designed for modification of therapeutics emulating enzymatic strategies found in Nature. These strategies are suitable for a diverse range of applications - not only for protein-polymer conjugation, particle decoration and surface immobilization, but also for the decoration of complex biomaterials and the synthesis of bioresponsive drug delivery systems. This article reviews latest chemical and enzymatic strategies for the biorthogonal decoration of biomaterials with therapeutic proteins and inter-positioned linker structures. Finally, the numerous reports at the interface of biomaterials, linkers, and therapeutic protein decoration are integrated into practical advice for design considerations intended to support the selection of productive ligation strategies.

Multivalent Peptide-Nanoparticle Conjugates for Influenza-Virus Inhibition

To inhibit binding of the influenza A virus to the host cell glycocalyx, we generate multivalent peptide-polymer nanoparticles binding with nanomolar affinity to the virus via its spike protein hemagglutinin. The chosen dendritic polyglycerol scaffolds are highly biocompatible and well suited for a multivalent presentation. We could demonstrate in vitro that by increasing the size of the polymer scaffold and adjusting the peptide density, viral infection is drastically reduced. Such a peptide-polymer conjugate qualified also in an in vivo infection scenario. With this study we introduce the first non-carbohydrate-based, covalently linked, multivalent virus inhibitor in the nano- to picomolar range by ensuring low peptide-ligand density on a larger dendritic scaffold.

A straightforward and sustainable synthesis of 1,4-disubstituted 1,2,3-triazoles via visible-light-promoted copper-catalyzed azide–alkyne cycloaddition (CuAAC)

A simple and environmentally friendly synthesis of triazoles through the effective reduction of copper(ii) assisted by organic dyes and promoted by visible light was developed.

Fabrication and characterization of hydrogels formed from designer coiled-coil fibril-forming peptides

A peptide sequence was designed to form α-helical fibrils and hydrogels at physiological pH, utilising transient buffering by carbonic acid.

Biodegradable PEG–dendritic block copolymers: synthesis and biofunctionality assessment as vectors of siRNA

New hybrid-biodegradable PEG–dendritic block copolymers as versatile delivery vectors for biomedical applications. Here, their biofunctionality as siRNA vectors is presented.

Dendrimers as Innovative Radiopharmaceuticals in Cancer Radionanotherapy

Radiotherapy is one of the most commonly used cancer treatments, with an estimate of 40% success that could be improved further if more efficient targeting and retention of radiation at the tumor site were achieved. This review focuses on the use of dendrimers in radionanotherapy, an emerging technology aimed to improve the efficiency of radiotherapy by implementing nanovectorization, an already established praxis in drug delivery and diagnosis. The labeling of dendrimers with radionuclides also aims to reduce the dose of radiolabeled materials and, hence, their toxicity and tumor resistance. Examples of radiolabeled dendrimers with alpha, beta, and Auger electron emitters are commented, along with the use of dendrimers in boron neutron capture therapy (BNCT). The conjugation of radiolabeled dendrimers to monoclonal antibodies for a more efficient targeting and the application of dendrimers in gene delivery radiotherapy are also covered.

Dynamics of internally functionalized dendrimers

The internally functionalized dendrimers are novel polymers that differ from conventional dendrimers by having additional functional units which do not branch out further. We investigate the dynamics of these structures with the inclusion of local semiflexibility and analyze their eigenmodes. The functionalized units clearly manifest themselves leading to a group of eigenvalues which are not present for homogeneous dendrimers. This part of the spectrum reveals itself in the local relaxation, leading to a corresponding process in the imaginary part of the complex dielectric susceptibility.

Synthesis and catalytic applications of C3-symmetric tris(triazolyl)methanol ligands and derivatives

Recently introduced tris(1,2,3-triazol-4-yl)methanols and derivatives (TTM ligands) have become a valuable subclass of C3-symmetric tripodal ligands for transition metal-mediated reactions. TTM-based ligand architectures are modularly constructed through regioselective, one-pot triple [3+2] cycloaddition of azides and alkynes. Applications of homogeneous systems of this type and of heterogenised (polystyrene- and magnetic nanoparticle-supported) TTM ligands in synthesis and catalysis are compiled in this Feature Article.

Polymerizing Insulin with Photocleavable Linkers to Make Light-Sensitive Macropolymer Depot Materials

The use of light-sensitive polymers for the release of therapeutics is an important approach allowing the timing and amount of the release to be controlled precisely. The use of light has been pioneered to control insulin release from a dermal photoactivated depot, or PAD. One of the main impediments to the use of light-sensitive polymers in this context is the density of the materials: The large majority of the material is the carrier polymer, with the minority being the therapeutic. In this work, the feasibility of using insulin itself as a monomer in the polymerization process is demonstrated. Insulin modified with either one or two light cleavable azide groups is polymerized with a tridentate alkyne-bridging monomer using a click reaction. The resulting material called a "macropolymer" is ≈85% insulin, is insoluble in aqueous solvent, and releases native, soluble insulin upon irradiation.