Preparation and Evaluation of Multiple Nanoemulsions Containing Gadolinium (III) Chelate as a Potential Magnetic Resonance Imaging (MRI) Contrast Agent

Self-assembly and structures of nanoscale double emulsion droplets through coarse-grained molecular dynamics simulations

Examples of self-assembled multiple emulsion droplets on the nanometre scale are very rare. In this work, we use coarse-grained (CG) molecular dynamics simulations to study the self-assembly of ternary mixtures consisting of water, n-heptane, and nonionic surfactant tetraethylene glycol monododecyl ether (C12E4). The water volume fractions studied are 1%, 3%, and 5%, respectively. Various nanoscale emulsions are obtained in a spontaneous process. When the water/surfactant volume ratio vm/s = 1.0/1.0, the obtained emulsion droplets are identified as oil-in-water-in-oil (O/W/O) double types, consisting of an oil core, an inner surfactant layer, a water layer, and an outer surfactant layer. The water molecules are distributed around the hydrophilic ends of the surfactants, while the hydrophobic ends of the surfactants wrap the oil cores and penetrate into the oil bulk. Hydrogen-bond interactions among water and the hydrophilic ends of the surfactants form cross-links that stabilize the double emulsion droplets. The sizes of all the oil cores inside the droplets are <6 nm in diameter, even with the highest water volume fraction of 5%. Both the concentration of free water molecules on the order of 10-6 mol/cm3 and the favourable energy change during emulsion formation indicate that the emulsion droplets are thermodynamically stable. In contrast, for vm/s = 1.0/5.5, no double emulsion but a simple water-in-oil emulsion was observed, with morphologies evolving from oblate to bicontinuous phases with an increase in the water volume fraction from 1% to 5%. Our coarse-grained molecular dynamics simulations provide valuable insight for the preparation of nanoscale double emulsions and the characterization of their structures.

Thermal Analysis Tools for Physico-Chemical Characterization and Optimization of Perfluorocarbon Based Emulsions and Bubbles Formulated for Ultrasound Imaging

Self-emulsifying microbubbles, especially designed to increase the contrast of ultrasound images by the inclusion of perfluorocarbon molecules, have been studied by thermal analysis techniques. The microbubbles were made of a blend of gas (20%), surfactants (50%) and water (30%). The surfactants were mixtures of polysorbate-85, Span-80, poloxamer 188, glycerol and fluorinated surfactant (Zonyl®). Microbubbles have been characterized by means of diffusion light scattering and optical imaging. The effect of Zonyl® on encapsulation rate, as well as gas vaporization temperature and gas release temperature, has been assessed by means of Differential Scanning Calorimetry (DSC) and Thermogravimetric Analyses (TGA). Microscopy and laser granulometry techniques have been also carried out for each formulation in order to determine the number of microbubbles and their size, respectively. Moreover, stability of the emulsions has been evaluated by DSC and confronted with the results obtained from the ultrasound experiments. Average microbubble concentrations of 7.2 × 107 and 8.9 × 107 per mL were obtained for perfluorohexane and perfluoropentane based emulsions, respectively. The present study demonstrates that the amount of encapsulated perfluorocarbon increases and the gas evaporation temperature decreases with the concentration of Zonyl®. Furthermore, the best ultrasound contrast images have been obtained in vitro with the samples containing the lowest Zonyl® concentration. An explication regarding the role of Zonyl® in the emulsion/microbubbles preparations is proposed here in order to optimize self-emulsifying microbubble formulation for pharmaceutical development.

Spontaneous Formation of Double Emulsions at Particle-Laden Interfaces

HYPOTHESIS

Traditionally, double emulsions are produced in the presence of both oil-soluble and water-soluble surfactants in sequential droplet formation settings or unique fluidic designs. Micelles, assemblies of surfactants in liquid mediums, can generate single emulsion droplets without requiring input energy. We hypothesize that the synergy between nanoparticles in one phase, and micelles in the other phase can spontaneously generate double emulsions. Nanoparticles can become surface-activated by adsorbing surfactants and form the second type of emulsions from the initially emulsified phase by micelles.

EXPERIMENTS

We design a thermodynamically-driven emulsification platform where double emulsions are spontaneously formed as soon an aqueous nanoparticle dispersion is placed in contact with an oleic micellar solution. Confocal and cryogenic-scanning electron microscopies are utilized to characterize structure and intensity of emulsions at various concentrations of silica nanoparticle and Span micelles. The rate of particle surface activation and emulsification and the amount of water intake are quantified using dynamic light scattering, dynamic interfacial tension, and density measurements.

FINDINGS

Nanoscale water droplets nucleate in the oil in form of swollen micelles. Over time, nanoparticles form a water-shell encapsulating the swollen-micelle rich oil phase. The gradual surfaceactivation of nanoparticles is key in self-double emulsification and controlling the emulsion intensity. We build on this new discovery and design a novel system for double emulsification. Incorporating nanoparticles into spontaneous emulsification systems opens novel routes for designing emulsion-based materials.

Water-in-Oil-in-Water Nanoemulsions Containing Temulawak (Curcuma xanthorriza Roxb) and Red Dragon Fruit (Hylocereus polyrhizus) Extracts

Hydrophobic curcumin in temulawak extract and hydrophilic betacyanin in red dragon fruit extract are high-value bioactive compounds with extensive applications in functional food. In this study, these extracts were encapsulated in water-in-oil-in-water (w/o/w) nanoemulsions as a delivery system using a two-step high-energy emulsification method. PGPR and Span 20 were used as lipophilic emulsifiers for the primary w/o emulsion. The most stable w/o/w formulation with the least oil phase separation of 5% v/v consisted of w/o emulsion (15% w/w) and Tween 80 (1.5% w/w) as hydrophilic emulsifier. The formulation was characterized by a 189-nm mean droplet diameter, 0.16 polydispersity index, and –32 mV zeta potential. The freeze–thaw stability may be attributed to the combination of low w/o emulsion content and high Tween 80 concentration in the outer water phase of the w/o/w nanoemulsions used in this study. The IC₅₀ values of the nanoemulsion and the red dragon fruit extract were similar. It means that the higher concentration of curcumin in the nanoemulsions and the lower IC₅₀ value of temulawak extract ensured sufficient antioxidant activities of the w/o/w nanoemulsions.

Studies on the Effect of Oil and Surfactant on the Formation of Alginate-Based O/W Lidocaine Nanocarriers Using Nanoemulsion Template

The application of various nanocarrier systems was widely explored in the field of pharmaceuticals to achieve better drug encapsulation and delivery. The aim of this study was to encapsulate lidocaine in alginate-based o/w nanocarriers based on the type of oil (i.e., solid or liquid), using a nanoemulsion template prepared by ultrasound-assisted phase inversion temperature (PIT) approach. The nanoemulsion template was initially prepared by dissolving lidocaine in the oil phase and surfactant and alginate in the aqueous phase, and keeping the PIT at around 85 °C, accompanied by gradual water dilution at 25 °C, to initiate the formation of nanoparticles (o/w) with the aid of low frequency ultrasound. The composition and concentration of the oil phase had a major impact on the particle size and led to an increase in the size of the droplet. The lipids that showed a higher drug solubility also showed higher particle size. On the other hand, increasing the concentration of surfactant decreases the size of the droplet before the concentration of the surfactant exceeds the limit, after which the size of the particle increases due to the aggregates that could be produced from the excess surfactant. The method used produced nanoemulsions that maintained nano-sized droplets < 50 nm, over long-term storage. Our findings are important for the design of nanocarrier systems for the encapsulation of lipophilic molecules.

Visual validation of the measurement of entrapment efficiency of drug nanocarriers

Entrapment efficiency (EE) is a crucial parameter for the evaluation of nanocarriers. The accurate measurement of EE demands clear separation of nanocarriers from free drugs, which so far has not been clearly validated due to a lack of functional tools to identify nanocarriers. Herein, an environment-responsive water-quenching fluorophore was employed to label and identify model nanocarriers, polycaprolactone nanoparticles (PN), methoxy polyethylene glycol-poly(d,l-lactic acid) polymeric micelles (PM) and solid lipid nanoparticles (SLN). The separation process of three commonly used methods (centrifugation, ultrafiltration and gel permeation chromatography) was visualized by live imaging. The separation efficiency of the centrifugation method is very poor, especially for PM (40 nm), SLN (100 nm) and PN (100 nm); only PN (200 nm) can be efficiently separated but at a consumption of enormous energy. The ultrafiltration method shows the best separation efficiency with only 0.32-0.93% of leakage of the nanocarriers. Gel permeation chromatography exhibits good separation as well but suffers from low recovery, a potential factor that might compromise the accuracy of EE measurement. In conclusion, the ultrafiltration method is the method of choice for efficient separation and accurate measurement of EE.

Current application of phytocompound-based nanocosmeceuticals for beauty and skin therapy

Phytocompounds have been used in cosmeceuticals for decades and have shown potential for beauty applications, including sunscreen, moisturizing and antiaging, and skin-based therapy. The major concerns in the usage of phyto-based cosmeceuticals are lower penetration and high compound instability of various cosmetic products for sustained and enhanced compound delivery to the beauty-based skin therapy. To overcome these disadvantages, nanosized delivery technologies are currently in use for sustained and enhanced delivery of phyto-derived bioactive compounds in cosmeceutical sectors and products. Nanosizing of phytocompounds enhances the aseptic feel in various cosmeceutical products with sustained delivery and enhanced skin protecting activities. Solid lipid nanoparticles, transfersomes, ethosomes, nanostructured lipid carriers, fullerenes, and carbon nanotubes are some of the emerging nanotechnologies currently in use for their enhanced delivery of phytocompounds in skin care. Aloe vera, curcumin, resveratrol, quercetin, vitamins C and E, genistein, and green tea catechins were successfully nanosized using various delivery technologies and incorporated in various gels, lotions, and creams for skin, lip, and hair care for their sustained effects. However, certain delivery agents such as carbon nanotubes need to be studied for their roles in toxicity. This review broadly focuses on the usage of phytocompounds in various cosmeceutical products, nanodelivery technologies used in the delivery of phytocompounds to various cosmeceuticals, and various nanosized phytocompounds used in the development of novel nanocosmeceuticals to enhance skin-based therapy.