Biosorption of azo dyes by raspberry-like Fe3O4@yeast magnetic microspheres and their efficient regeneration using heterogeneous Fenton-like catalytic processes over an up-flow packed reactor

Application of biochar in advanced oxidation processes: supportive, adsorptive, and catalytic role

The advanced oxidation processes (AOPs), especially sulphate radical (SO₄^•-)-based AOPs (SR-AOPs), have been considered more effective, selective, and prominent technologies for the removal of highly toxic emerging contaminants (ECs) due to wide operational pH range and relatively higher oxidation potential (2.5-3.1 V). Recently, biochar (BC)-based composite materials have been introduced in AOPs due to the dual benefits of adsorption and catalytic degradation, but the scientific review of BC-based catalysts for the generation of reactive oxygen species (ROSs) through radical- and non-radical-oriented routes for EC removal was rarely reported. The chemical treatments, such as acid/base treatment, chemical oxidation, surfactant incorporation, and coating and impregnation of minerals, were applied to make BC suitable as supporting materials (SMs) for the loading of Fenton catalysts to boost up peroxymonosulphate/persulphate/H₂O₂ activation to get ROSs including ^•OH, SO₄^•-, ¹O₂, and O₂^•- for targeted pollutant degradation. In this review, all the possible merits of BC-based catalysts including supportive, adsorptive, and catalytic role are summarised along with the possible route for the development prospects of BC properties. The limitations of SR-AOPs especially on production of non-desired oxyanions, as well as disinfection intermediates and their potential solutions, have been identified. Lastly, the knowledge gap and future-oriented research needs are highlighted.

Removal of pharmaceuticals from water by homo/heterogonous Fenton-type processes - A review

The presence of emerging contaminants such as pharmaceuticals in natural waters has raised increasing concern due to their frequent appearance and persistence in the aquatic ecosystem and the threat to health and safety of aquatic life, even at trace concentrations. Conventional water treatment processes are known to be generally inadequate for the elimination of these persistent contaminants. Therefore, the use of advanced oxidation processes (AOPs) which are able to efficiently oxidize organic pollutants has attracted a great amount of attention. The main limitation of AOPs lies in their high operating costs associated with the consumption of energy and chemicals. Fenton-based processes, which utilize nontoxic and common reagents and potentially can exploit solar energy, will considerably reduce the removal cost of recalcitrant contaminants. The disadvantages of homogeneous Fenton processes, such as the generation of high amounts of iron-containing sludge and limited operational range of pH, have prompted much attention to the use of heterogeneous Fenton processes. In this review, the impacts of some controlling parameters including the H₂O₂ and catalyst dosage, solution pH, initial contaminants concentrations, temperature, type of catalyst, intensity of irradiation, reaction time and feeding mode on the removal efficiencies of hetero/homogeneous Fenton processes are discussed. In addition, the combination of Fenton-type processes with biological systems as the pre/post treatment stages in pilot-scale operations is considered. The reported experimental results obtained by using Fenton and photo-Fenton processes for the elimination of pharmaceutical contaminants are also compiled and evaluated.

Efficient Absorption of Antibiotic from Aqueous Solutions over MnO2@SA/Mn Beads and Their In Situ Regeneration by Heterogeneous Fenton-Like Reaction

Alginate has been extensively used as absorbents due to its excellent properties. However, the practical application of pure alginate has been restricted since the saturated adsorbent has weak physical structure and could not be regenerated easily. In this study, a low-cost and renewable composite MnO2@alginate/Mn adsorbent has been prepared facilely for the absorptive removal of antibiotic wastewater. FE-SEM, FTIR, and XRD analyses were used to characterize the samples. The norfloxacin (NOR) was used as an index of antibiotics. More specifically, the batch absorption efficiency of the adsorbents was evaluated by pH, contact time with different NOR concentration, and the temperature. Thus, the performance of absorption kinetic dynamics and isotherm equations were estimated for the adsorptive removal process. Parameters includingΔG0,ΔH0, andΔS0were utilized to describe the feasible adsorption process. To regenerate the saturated absorptive sites of the adsorbent, the heterogeneous Fenton-like reactions were trigged by introduction of H2O2. The results showed that the in situ regenerating has exhibited an excellent recycling stability. The high activity and the simple fabrication of the adsorbents make them attractive for the treatment of wastewater containing refractory organic compound and also provide fundamental basis and technology for further practical application.

Facile fabrication of sea buckthorn biocarbon (SB)@α-Fe2O3 composite catalysts and their applications for adsorptive removal of doxycycline wastewater through a cohesive heterogeneous Fenton-like regeneration

Novel SB@α-Fe₂O₃ composite catalysts were fabricated through a simple thermal conversion process from SB@β-FeOOH precursor, which maintained good adsorption capacity after five successive adsorption/heterogeneous Fenton-like regeneration cycles.