Thiophene oxidation with H2O2 over defect and perfect titanium silicalite-1: a computational study

Controllable Synthesis of Titanium Silicon Molecular Zeolite Nanosheet with Short b-Axis Thickness and Application in Oxidative Desulfurization

Titanium silicon molecular zeolite (TS-1) plays an important role in catalytic reactions due to its unique nanostructure. The straight channel on TS-1 was parallel to the orientation of the short b-axis and directly exposed to the aperture of the 10-member ring with a diameter of 0.54 nm × 0.56 nm. This structure could effectively reduce the diffuse restriction of bulk organic compounds during the oxidative desulfurization process. As a kind of cationic polymer electrolyte, polydimethyldiallyl ammonium chloride (PDDA) contains continuous [C8H16N+Cl-] chain segments, in which the Cl- could function as an effective structure-directing agent in the synthesis of nanomaterials. The chain of PDDA could adequately interact with the [0 1 0] plane in the preparation process of zeolite, and then the TS-1 nanosheet with short b-axis thickness (6 nm) could be obtained. The pore structure of the TS-1 nanosheet is controlled by regulating the content of PDDA. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physical adsorption analysis, infrared absorption spectrum and ultraviolet-visible spectrum were used to determine the TS-1. The thinner nanosheets exhibit excellent catalytic performance in oxidative desulfurization of dibenzothiophene (DBT), in which the removal rate could remain at 100% after three recycles. Here, the TS-1 nanosheet with short b-axis thickness has a promising future in catalytic reactions.

A DFT study on catalytic oxidative desulfurization with H2O2 over Ti-MWW zeolite

The catalytic mechanism of Ti-MWW in oxidative desulfurization with H₂O₂ was investigated by quantum chemical calculations. A defect model (Ti-d) and a perfect model (Ti-p) were proposed for Ti-MWW, and two possible reaction pathways starting from Ti-d and Ti-p were considered. On Ti-d, the hydroperoxy bidentate intermediate TiOOH (η²) was formed by activating H₂O₂ at the Ti center. Afterwards, aromatic sulfides were oxidized to sulfoxides and to ultimate sulfones by TiOOH (η²). The order of oxidation reactivity was benzothiophene > dibenzothiophene > thiophene, conforming to experimental observations. The Ti-p pathway proposed for oxidation of sulfides with H₂O₂ resulted in higher energy barriers compared to the Ti-d pathway. Natural bond orbital charge analysis was carried out to understand the charge distribution. This work showed that the defective Ti-MWW model for oxidative desulfurization was more active than the perfect model. Graphical abstract Catalytic oxidative desulfurizationwith H₂O₂ over Ti-MWW zeolite.