Evolution of microwave irradiation and its application in green chemistry and biosciences

Montmorillonite K-10 catalyzed synthesis of Hantzsch dihydropyridine derivatives from methyl arenes via in situ generated ammonia under microwave irradiation in neat conditions

An expeditious, efficient, and environmentally friendly approach has been established for the synthesis of diverse Hantzsch 1,4-dihydropyridine derivatives utilizing montmorillonite K-10 as a catalyst in solvent-free conditions. The procedure entails the reaction of methyl arynes as a sustainable surrogate of aryl aldehydes, active methylene compounds, and urea hydrogen peroxide (UHP) as an oxidising agent as well as a source of ammonia under microwave irradiation, facilitated by montmorillonite K-10.

Green Approach Toward Triazole Forming Reactions for Developing Anticancer Drugs

Compounds containing triazole have many significant applications in the dye and ink industry, corrosion inhibitors, polymers, and pharmaceutical industries. These compounds possess many antimicrobial, antioxidant, anticancer, antiviral, anti-HIV, antitubercular, and anticancer activities. Several synthetic methods have been reported for reducing time, minimizing synthetic steps, and utilizing less hazardous and toxic solvents and reagents to improve the yield of triazoles and their analogues synthesis. Among the improvement in methods, green approaches towards triazole forming biologically active compounds, especially anticancer compounds, would be very important for pharmaceutical industries as well as global research community. In this article, we have reviewed the last five years of green chemistry approaches on click reaction between alkyl azide and alkynes to install 1,2,3-triazole moiety in natural products and synthetic drug-like molecules, such as in colchicine, flavanone cardanol, bisphosphonates, thiabendazoles, piperazine, prostanoid, flavonoid, quinoxalines, C-azanucleoside, dibenzylamine, and aryl-azotriazole. The cytotoxicity of triazole hybrid analogues was evaluated against a panel of cancer cell lines, including multidrug-resistant cell lines.

Three-dimensional observations of the electric field distribution of variable frequency microwaves, and scaling-up organic syntheses

Variable Frequency Microwave (VFM) radiation provides a solution to the inhomogeneity of the electric field in the cavity, which has long led to a decline in the reliability of microwave chemical data and its industrial utilization. Herein, we report in-situ three-dimensional experimental measurements of the electric field's uniform distribution of VFMs within a multimode cavity under high power conditions, and their subsequent comparison to Fixed Frequency Microwaves (FFM) that could only be assessed earlier through theoretical analysis. We also examine the consequences of changes in VFM irradiation conditions and elucidate the threshold at which VFM irradiation might prove beneficial in syntheses. With an ultimate focus on the use of VFM microwave radiation toward industrial applications, we carried out an effective synthesis of 4-methylbyphenyl (4-MBP) in the presence of palladium (the catalyst) supported on activated carbon particulates (Pd/AC), and revisited two principal objectives: (a) the effective suppression of discharge phenomena (formation of hot spots), and (b) synthesis scale-up using a 5-fold increase in sample quantity and a 7.5-fold larger reactor size (diameter) than otherwise used in earlier studies.

Implementation of Highly Stable Memristive Characteristics in an Organic-Inorganic Hybrid Resistive Switching Layer of Chitosan-Titanium Oxide with Microwave-Assisted Oxidation

This study proposes a high-performance organic-inorganic hybrid memristor for the development of neuromorphic devices in the memristor-based artificial synapse. The memristor consists of a solid polymer electrolyte (SPE) chitosan layer and a titanium oxide (TiO_x) layer grown with a low-thermal-budget, microwave-assisted oxidation. The fabricated Ti/SPE-chitosan/TiO_x/Pt-structured memristor exhibited steady bipolar resistive switching (BRS) characteristics and demonstrated excellent endurance in 100-cycle repetition tests. Compared to SPE-chitosan memristors without a TiO_x layer, the proposed organic-inorganic hybrid memristor demonstrated a higher dynamic range and a higher response to pre-synaptic stimuli such as short-term plasticity via paired-pulse facilitation. The effect of adding the TiO_x layer on the BRS properties was examined, and the results showed that the TiO_x layer improved the chemical and electrical superiority of the proposed memristor synaptic device. The proposed SPE-chitosan organic-inorganic hybrid memristor also exhibited a stable spike-timing-dependent plasticity, which closely mimics long-term plasticity. The potentiation and depression behaviors that modulate synaptic weights operated stably via repeated spike cycle tests. Therefore, the proposed SPE-chitosan organic-inorganic hybrid memristor is a promising candidate for the development of neuromorphic devices in memristor-based artificial synapses owing to its excellent stability, high dynamic range, and superior response to pre-synaptic stimuli.

Bifunctional cysteine gold nanoclusters for β-amyloid fibril inhibition and fluorescence imaging: a distinctive approach to manage Alzheimer's disease

Alzheimer's disease (AD) is a progressive complex neurodegenerative disorder affecting millions of individuals worldwide. Currently, there is no effective treatment for AD. AD is characterized by the deposition of amyloid plaques/fibrils. One major strategy for managing this disease is by slowing the progression of AD using different drugs which could potentially limit free-radical formation, oxidative stress and lipid peroxidation and promote the survival of neurons exposed to β-amyloid. Inhibition of amyloid fibrillization and clearance of amyloid plaques/fibrils are essential for the prevention and treatment of AD. The thiophilic interaction between the side chain of an aromatic residue in a polypeptide and a sulphur atom of the compound can effectively inhibit amyloid fibril formation. In this work, we have synthesized cysteine-capped gold nanoclusters (Cy-AuNCs) which exhibit inherent red emission and can disintegrate amyloid fibrils through the aforementioned thiophilic interactions. Herein, we also used molecular docking to study the thiophilic interactions between the sulphur atom of Cy-AuNCs and the aromatic rings of the protein. Finally, the gold cluster was functionalized with a brain targeting molecule, Levodopa (AuCs-LD), to specifically target the brain and to facilitate passage through the blood brain barrier (BBB). Both Cy-AuNCs and AuCs-LD showed good biocompatibility and the inherent fluorescence properties of nanoclusters enabled real time imaging. The efficacy of the nanoclusters to disintegrate amyloid fibrils and their ability to cross the BBB were demonstrated both in vitro and in vivo in the BBB model and the AD animal model respectively. Our results imply that nanoparticle-based artificial molecular chaperones may offer a promising therapeutic approach for AD.

Facile Synthesis of Novel Disperse Dyes for Dyeing Polyester Fabrics: Demonstrating Their Potential Biological Activities

Original work showed the composition of the dyes and the antimicrobial/UV protective properties of a series of dyes obtained in our laboratories over the past twelve years in an easy way using microwave technology and their comparisons with conventional methods. The results we obtained clearly indicated that by using the microwave strategy, we were able to synthesize the new disperse dyes in minutes and with a much higher productivity when compared to the traditional methods, which took a much longer time, sometimes up to hours. We also introduced ultrasonic technology in dyeing polyester fabrics at 80 °C for an environmentally friendly approach, which was an alternative to traditional dyeing methods at 100 °C; we obtained a much higher color depth than traditional dyeing methods reaching 102.9%. We presented both the biological activity of the prepared new dyes and the fastness properties and clearly indicated that these dyes possess biological activity and high fastness properties.We presented through the results that when dyeing polyester fabrics with some selected disperse dyes, the color strength of polyester fabrics dyed at high temperatures was greater than the color strength of polyester fabrics dyed at low temperatures by 144%, 186%, 265% and 309%. Finally, we presented that a ZnO or TiO2 NPs post-dyeing treatment of polyester fabrics is promising strategy for producing polyester fabrics possess multifunction like self-cleaning property, high light fastness, antimicrobial and anti-ultraviolet properties.

Like Visiting an Old Friend: Fischer Glycosylation in the Twenty-First Century: Modern Methods and Techniques

Fischer glycosylation is typically the chemical reaction of a monosaccharide and an alcohol in presence of an acidic catalyst to afford glycosides in pyranosidic and furanosidic forms. This reaction is still applied today for the synthesis of specialized glycosides, and optimization and modification of the method have continued since its discovery by Emil Fischer in the 1890s. This review presents advancements in Fischer glycosylation described in literature of the past 15 years and its implementation in modern chemical methods.

Microwave-Assisted Synthesis of Azo Disperse Dyes for Dyeing Polyester Fabrics: Our Contributions over the Past Decade

Organic reactions utilizing the microwave strategy have become able to conduct in shorter times, with higher yields, and are compatible with green chemistry protocols. In recent years, microwave technologies as an effective agent in organic synthesis have been successful utilized in textile industries and for the synthesis of dyes, especially disperse dyes. Herein, we present our contributions over the past decade through the use of microwave technology not only in the synthesis of new biologically active organic compounds and disperse dyes, but also the use of this effective, environmentally friendly technology in dyeing polyester fabrics as an alternative to conventional heating methods. We also demonstrate both the fastness properties and biological activities of the newly prepared compounds. In addition, we present the treatment of dyeing baths by reusing them again in the dyeing process, using microwave energy to achieve this goal, and this has environmentally friendly dimensions. Some of the possible utilizations of microwave irradiation have been presented in many different fields of chemistry. We recommend relying on this effective and environmentally safe technology instead of relying on conventional methods that take a lot of time, give low yields, and may have a negative impact on the environment.

Empowering the Medicinal Applications of Bisphosphonates by Unveiling their Synthesis Details

Bisphosphonates (BPs), well-known medicinal compounds used for osteoporosis management, are currently the target of intensive research, from basic pre-formulation studies to more advanced stages of clinical practice. The high demand by the pharmaceutical industry inherently requires an easy, efficient and quick preparation of BPs. Current synthetic procedures are, however, still far from ideal. This work presents a comprehensive compilation of reports on the synthesis of the commercially available bisphosphonates that are pharmaceutical active ingredients. Current limitations to the conventional synthesis are assessed, and paths towards their improvement are described, either through the use of alternative solvents and/or by selecting appropriate ratios of the reactants. Innovative processes, such as microwave-assisted synthesis, are presented as more environmental-friendly and effective methods. The main advantages and setbacks of all syntheses are provided as a way to clarify and promote the development of simpler and improved procedures. Only in this way one will be able to efficiently respond to the future high demand of BPs, mostly due to the increase in life span in occidental countries.

A Sustainable Approach to the Low-Cost Recycling of Waste Glass Fibres Composites towards Circular Economy

For practical applications, both environmental and economic aspects are highly required to consider in the development of recycling of fibre reinforced polymers (FRPs) encountering their end-of-life. Here, a sustainable, low cost, and efficient approach for the recycling of the glass fibre (GF) from GF reinforced epoxy polymer (GFRP) waste is introduced, based on a microwave-assisted chemical oxidation method. It was found that in a one-step process using microwave irradiation, a mixture of hydrogen peroxide (H2O2) as a green oxidiser and tartaric acid (TA) as a natural organic acid could be used to decompose the epoxy matrix of a waste GFRP up to 90% yield. The recycled GFs with ~92.7% tensile strength, ~99.0% Young’s modulus, and ~96.2% strain-to-failure retentions were obtained when compared to virgin GFs (VGFs). This short microwave irradiation time using these green and sustainable recycling solvents makes this a significantly low energy consumption approach for the recycling of end-of-life GFRPs.

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium

A high-performance multilayer coating with external, flexible, and silicon-doped hydroxyapatite (Si-HA) nanorods was designed using bionics. Plasma electrolytic oxidation (PEO) and the microwave hydrothermal (MH) method were used to rapidly deposit this multilayer coating on a titanium (Ti) substrate, applied for 5 and 10 min, respectively. The bioactive multilayer coating was composed of four layers, and the outermost layer was an external growth layer that consisted of many Si-HA nanorods with a single-crystal structure. The Si-HA nanorods exhibited good flexibility, likely because of their complete single-crystal structures, smooth surfaces, and suitable diameters and lengths. This multilayer coating with a high surface energy was superhydrophilic and exhibited good in vitro bioactivities, such as good apatite formation ability, good cell spreading, and high osteogenic gene expression levels. After implantation in the tibia of rabbits for 16 weeks, almost no soft tissues were formed at the MH treated PEO implant-bone interface. A direct bone contact interface was formed by a bridging effect of the flexible Si-HA nanorods, which further produced a high implant-bone interface bonding strength. The current results demonstrated that the bioactive multilayer layers with the flexible Si-HA nanorods displayed a very good osseointegration ability, showing promising applications in the biomedical field.

Fabrication of hydroxyapatite on pure titanium by micro-arc oxidation coupled with microwave-hydrothermal treatment

Porous hydroxyapatite (HA)-containing composite films were prepared by a novel method consisting of micro-arc oxidation (MAO) combined with microwave-hydrothermal (M-H) treatment. The morphology, composition and phase composition of the bioactive films were investigated with scanning electron microscopy with energy dispersive X-ray spectroscopy and X-ray diffraction. MTT assay was carried out to investigate the in vitro effects of the different surfaces on bone integration properties. The prepared MAO films consisted mainly of anatase, rutile and tricalcium phosphate along with amorphous calcium (Ca) and phosphorus (P) phases. The M-H-treated composite films were composed primarily of anatase, rutile and HA. As the time and temperature of the M-H treatment increased, the number of HA crystals gradually increased. Using the M-H method, HA was obtained at a lower temperature and in a shorter period of time compared to the conventional hydrothermal method. The results suggest that the M-H method significantly decreases the hydrothermal reaction temperature and also greatly shortens the reaction time. Due to the nanocrystallinity and porosity of the prepared composite films, the method presented here shows promise for the formation of bioactive materials for medical applications.

Live cell cytoplasm staining and selective labeling of intracellular proteins by non-toxic cell-permeant thiophene fluorophores

A structurally correlated series of cell-permeant thiophene fluorophores, characterized by intense green or red fluorescence inside live mouse embryonic fibroblasts, was developed. The fluorophores displayed rapid internalization, excellent retention inside the cells, and high optical stability in the cytosolic environment and did not alter cell viability and reproducibility. Depending on the molecular structure, they experienced distinct fate inside the cells: from bright and lasting staining of the cytoplasm to selective tagging of a small set of globular proteins.

Microwave-Assisted Synthesis and in Vitro Antibacterial Activity of Novel Steroidal 1,2,4-Triazole Schiff Base Derivatives

A series of novel Schiff bases containing both a 1,2,4-triazole and deoxycholic acid skeleton have been synthesised in excellent yields and in high purity by means of microwave irradiation. The structures of the target compounds were characterised by MS, IR and NMR as well as elemental analysis. All the products were evaluated for their in vitro antibacterial activities against Gram positive ( Staphylococcus aureus and Bacillus subtilis) and Gram negative bacteria ( Pseudomonas seruginosa and Escherichia coli). Four of the compounds displayed varying levels of antibacterial activity against P. aeruginosa and S. aureus, but none of the compounds showed any activity against E. coli and B. subtilis.

Microwave heating for the rapid generation of glycosylhydrazides

Conditions for simple derivatization of reducing carbohydrates via adipic acid dihydrazide microwave-assisted condensation are described. We demonstrate with a diverse set of oligo- and polysaccharides how to improve a restrictive and labor intensive conventional conjugation protocol by using microwave-assisted chemistry. We show that 5 min of microwave heating in basic or acidic conditions are adequate to generate, in increased yields, intact and functional glycosylhydrazides, whereas hours to days and acidic conditions are generally required under conventional methods.