An environmentally benign method for the biosynthesis of stable selenium nanoparticles

Bioactivity of selenium nanoparticles biosynthesized by crude phycocyanin extract of Leptolyngbya sp. SSI24 cultivated on recycled filter cake wastes from sugar-industry

BACKGROUND

Beet filter cake (BFC) is a food-grade solid waste produced by the sugar industry, constituting a permanent source of pollution. Cyanobacteria are considered a sustainable resource for various bioactive compounds such as phycocyanin pigment with valuable applications. This study aimed to use beet filter cake extract (BFCE) as an alternative medium for the economic cultivation of cyanobacterium Leptolyngbya sp. SSI24 PP723083, then biorefined the bioactive component such as phycocyanin pigment that could be used in the production of selenium nanoparticles.

RESULTS

The results of the batch experiment displayed that the highest protein content was in BG11medium (47.9%); however, the maximum carbohydrate and lipid content were in 25% BFCE (15.25 and 10.23%, respectively). In addition, 75% BFCE medium stimulated the phycocyanin content (25.29 mg/g) with an insignificant variation compared to BG11 (22.8 mg/g). Moreover, crude phycocyanin extract from Leptolyngbya sp SSI24 cultivated on BG11 and 75% BFCE successfully produced spherical-shaped selenium nanoparticles (Se-NPs) with mean sizes of 95 and 96 nm in both extracts, respectively. Moreover, XRD results demonstrated that the biosynthesized Se-NPs have a crystalline nature. In addition, the Zeta potential of the biosynthesized Se-NPs equals - 17 mV and - 15.03 mV in the control and 75% BFCE treatment, respectively, indicating their stability. The biosynthesized Se-NPs exhibited higher effectiveness against Gram-positive bacteria than Gram-negative bacteria. Moreover, the biosynthesized Se-NPs from BG11 had higher antioxidant activity with IC50 of 60 ± 0.7 compared to 75% BFCE medium. Further, Se-NPs biosynthesized from phycocyanin extracted from Leptolyngbya sp cultivated on 75% BFCE exhibited strong anticancer activity with IC50 of 17.31 ± 0.63 µg/ml against the human breast cancer cell line.

CONCLUSIONS

The BFCE-supplemented medium can be used for the cultivation of cyanobacterial strain for the phycocyanin accumulation that is used for the green synthesis of selenium nanoparticles that have biological applications.

Tailored green synthesized silymarin-selenium nanoparticles: Topical nanocarrier of promising antileishmanial activity

Poor drug penetration, emerging drug resistance, and systemic toxicity are among the major obstacles challenging the current treatment of cutaneous leishmaniasis. Hence, developing advanced strategies for effective and targeted delivery of antileishmanial agents is crucial. Several drug delivery carriers have been developed till current date for dermal/transdermal delivery, especially those which are fabricated using eco-friendly synthesis approaches, since they protect the environment from the harmful effects of chemical waste disposal. This work describes the preparation of selenium nanoparticles loaded with silymarin via one-pot green reduction technique, for treatment of cutaneous leishmaniasis. The selected silymarin loaded selenium nanoparticles (SSNs4-0.1) displayed good loading efficiency of 58.22 ± 0.56 %, zeta potential of -30.63 ± 0.40 mV, hydrodynamic diameter of 245.77 ± 11.12 nm, and polydispersity index of 0.19 ± 0.01. It exhibited good physical stability, as well as high ex vivo deposition % in the epidermis (46.98 ± 1.51 %) and dermis (35.23 ± 1.72 %), which was further proven using confocal laser microscopy. It also exhibited significant cytocompatibility and noticeable cellular internalization of 90.02 ± 3.81 % in human fibroblasts, as well as high trypanothione reductase inhibitory effect (97.10 ± 0.30 %). Results of this study confirmed the successful green synthesis of silymarin-loaded selenium nanoparticles; delineating them as one of the promising antileishmanial topical delivery systems.

Highly elastic, fatigue-resistant, antibacterial, conductive, and nanocellulose-enhanced hydrogels with selenium nanoparticles loading as strain sensors

The fabrication of highly elastic, fatigue-resistant and conductive hydrogels with antibacterial properties is highly desirable in the field of wearable devices. However, it remains challenging to simultaneously realize the above properties within one hydrogel without compromising excellent sensing ability. Herein, we fabricated a highly elastic, fatigue-resistant, conductive, antibacterial and cellulose nanocrystal (CNC) enhanced hydrogel as a sensitive strain sensor by the synergistic effect of biosynthesized selenium nanoparticles (BioSeNPs), MXene and nanocellulose. The structure and potential mechanism to generate biologically synthesized SeNPs (BioSeNPs) were systematically investigated, and the role of protease A (PrA) in enhancing the adsorption between proteins and SeNPs was demonstrated. Additionally, owing to the incorporation of BioSeNPs, CNC and MXene, the synthesized hydrogels showed high elasticity, excellent fatigue resistance and antibacterial properties. More importantly, the sensitivity of hydrogels determined by the gauge factor was as high as 6.24 when a high strain was applied (400-700 %). This study provides a new horizon to synthesize high-performance antibacterial and conductive hydrogels for soft electronics applications.

Alleviation potential of green-synthesized selenium nanoparticles for cadmium stress in Solanum lycopersicum L: modulation of secondary metabolites and physiochemical attributes

KEY MESSAGE

Selenium nanoparticles reduce cadmium absorption in tomato roots, mitigating heavy metal effects. SeNPs can efficiently help to enhance growth, yield, and biomolecule markers in cadmium-stressed tomato plants. In the present study, the effects of selenium nanoparticles (SeNPs) were investigated on the tomato plants grown in cadmium-contaminated soil. Nanoparticles were synthesized using water extract of Nigella sativa and were characterized for their size and shape. Two application methods (foliar spray and soil drench) with nanoparticle concentrations of 0, 100, and 300 mg/L were used to observe their effects on cadmium-stressed plants. Growth, yield, biochemical, and stress parameters were studied. Results showed that SeNPs positively affected plant growth, mitigating the negative effects of cadmium stress. Shoot length (SL), root length (RL), number of branches (NB), number of leaves per plant (NL), and leaf area (LA) were significantly reduced by cadmium stress but enhanced by 45, 51, 506, 208, and 82%, respectively, by soil drench treatment of SeNPs. Similarly, SeNPs increased the fruit yield (> 100%) and fruit weight (> 100%), and decreased the days to fruit initiation in tomato plants. Pigments were also positively affected by the SeNPs, particularly in foliar treatment. Lycopene content was also enhanced by the addition of NPs (75%). Furthermore, the addition of SeNPs improved the ascorbic acid, protein, phenolic, flavonoid, and proline contents of the tomato plants under cadmium stress, whereas stress enzymes also showed enhanced activities under cadmium stress. It is concluded from the present study that the addition of selenium nanoparticles enhanced the growth and yield of Cd-stressed plants by reducing the absorption of cadmium and increasing the stress management of plants.

A State-of-the-Art Systemic Review on Selenium Nanoparticles: Mechanisms and Factors Influencing Biogenesis and Its Potential Applications

Selenium is a trace element required for the active function of numerous enzymes and various physiological processes. In recent years, selenium nanoparticles draw the attention of scientists and researchers because of its multifaceted uses. The process involved in chemically synthesized SeNPs has been found to be hazardous in nature, which has paved the way for safe and ecofriendly SeNPs to be developed in order to achieve sustainability. In comparison to chemical synthesis, SeNPs can be synthesized more safely and with greater flexibility utilizing bacteria, fungi, and plants. This review focused on the synthesis of SeNPs utilizing bacteria, fungi, and plants; the mechanisms involved in SeNP synthesis; and the effect of various abiotic factors on SeNP synthesis and morphological characteristics. This article discusses the synergies of SeNP synthesis via biological routes, which can help future researchers to synthesize SeNPs with more precision and employ them in desired fields.

Characterization of green synthesized selenium nanoparticles (SeNPs) in two different indigenous halophilic bacteria

BACKGROUND

In the biological method, using nonpathogenic and extremophile bacteria systems are not only safe and highly efficient but also a trump card for synthesizing nanoparticles. Halomonas elongata QW6 IBRC-M 10,214 (He10214) and Salinicoccus iranensis IBRC-M 10,198 (Si10198), indigenous halophilic bacteria, can be used for synthesizing selenium nanoparticles (SeNPs).

METHODS

SeNP biosynthesis was optimized in two halophilic bacteria and characterized by UV-Vis, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), zeta potential, and energy dispersive X-ray (EDX).

RESULTS

Optimized conditions for synthesizing SeNPs was at 300 °C at 150 rpm for 72 h and 6 mM or 8 mM concentration of Na2SeO3. UV-Vis indicated a sharp absorption peak at 294 nm. Spherical-shaped nanoparticles by a diameter of 30-100 nm were observed in FESEM and TEM microscopy images. The produced SeNPs were identified by a peak in FTIR spectra. In XRD analysis, the highest peak diffraction had a relationship with SeNPs. The zeta potential analysis showed SeNP production, and elemental selenium was confirmed by EDX.

CONCLUSIONS

Halophilic bacteria, owing to easy manipulation to create optimization conditions and high resistance, could serve as appropriate organisms for the bioproduction of nanoparticles. The biological method, due to effectiveness, flexibility, biocompatibility, and low cost, could be used for the synthesis of reproducible and stable nanoparticles.

Unveiling Antimicrobial and Insecticidal Activities of Biosynthesized Selenium Nanoparticles Using Prickly Pear Peel Waste

In the current study, prickly pear peel waste (PPPW) extract was used for the biosynthesis of selenium nanoparticles through a green and eco-friendly method for the first time. The biosynthesized SeNPs were characterized using UV-Vis, XRD, FTIR, TEM, SEM, EDX, and mapping. Characterization results revealed that biosynthesized SeNPs were spherical, polydisperse, highly crystalline, and had sizes in the range of 10–87.4 nm. Antibacterial, antifungal, and insecticidal activities of biosynthesized SeNPs were evaluated. Results revealed that SeNPs exhibited promising antibacterial against Gram negative (E. coli and P. aeruginosa) and Gram positive (B. subtilis and S. aureus) bacteria where MICs were 125, 125, 62.5, and 15.62 µg/mL, respectively. Moreover, SeNPs showed potential antifungal activity toward Candida albicans and Cryptococcus neoformans where MICs were 3.9 and 7.81 µg/mL, respectively. Furthermore, tested crud extract and SeNPs severely induced larvicidal activity for tested mosquitoes with LC50 and LC90 of 219.841, 950.087 mg/L and 75.411, 208.289 mg/L, respectively. The fecundity and hatchability of C. pipiens mosquito were significantly decreased as applied concentrations increased either for the crude or the fabricated SeNPs extracts. In conclusion, the biosynthesized SeNPs using prickly pear peel waste have antibacterial, antifungal, and insecticidal activities, which can be used in biomedical and environmental applications.

Green synthesis of colloidal selenium nanoparticles in starch solutions and investigation of their photocatalytic, antimicrobial, and cytotoxicity effects

In this research, we have offered a green and new synthesizing procedure for selenium nanoparticles (Se-NPs) through the utilization of Na₂SeO₃, in which starch has a role of stabilizer and capping agent, as the functionality of green reducing mediums is taken by glucose and ascorbic acid. According to the observations, this method has been capable of producing Se-NPs in lab conditions. Additionally, the synthesized Se-NPs can be separated from the aqueous solution of stabilizer and reducing agents by a high-speed. Certain analyzing procedures have been used to characterize the obtained particles including TEM, XRD, UV-VIS, DLS, FESEM, EDX, FTIR, and AFM. In this paper, we have investigated the antimicrobial and photocatalytic functionality of Se-NPs on Mycobacterium tuberculosis and Methylene blue (MB) and according to the results, these particles have shown satisfying activity in both cases. To be stated in exact, about 60% of MB has degraded under UV light after 150 min, which indicates the acceptable position of Se-NPs could be applied for eliminating water pollutions. Moreover, the attained data on colorectal cancer SW480 cell lines in regards to the in vitro cytotoxicity assessments have exhibited non-toxic effects, which had lasted throughout concentrations that had measured up to even 100 µg/mL within MTT assay.

Ecofriendly novel synthesis of tertiary composite based on cellulose and myco-synthesized selenium nanoparticles: Characterization, antibiofilm and biocompatibility

Microbial infections are considered common and dangerous for humans among other infections; therefore the synthesis of high efficacy antimicrobial and anti-biofilm composites is continuous to fight microbial resistance. In our study, a new and novel tertiary composite (TC) was synthesized, it composed of TEMPO cellulose (TOC), chitosan, starch, and myco-synthesized Se-NPs. Myco-synthesized Se-NPs and TC were fully characterized using UV, FT-IR, XRD, SEM with EDX, particle distribution, and mapping. The antimicrobial and anti-biofilm properties of selenium nanoparticles (Se-NPs) were effectively established for Pseudomonas aeruginosa and Staphylococcus aureus biofilms. The possible impact of myco-synthesized novel cellulose-based selenium nanoparticles tertiary composite on the biofilm formation of P. aeruginosa, S. aureus, and Candida albicans was evaluated in this study. TC exhibited constant biofilm inhibition against P. aeruginosa, S. aureus, and C. albicans, while the results obtained from cytotoxicity of Se-NPs and TC showed that, alteration occurred in the normal cell line of lung fibroblast cells (Wi-38) was shown as loss of their typical cell shape, granulation, loss of monolayer, shrinking or rounding of Wi-38 cell with an IC₅₀ value of where 461 and 550 ppm respectively.

Preparation and growth-promoting effect of selenium nanoparticles capped by polysaccharide-protein complexes on tilapia

BACKGROUND

Compared with traditional inorganic and organic selenium compounds, nano-selenium exhibited higher biological safety and nutritional potency. However, the biological efficacy of nano-selenium has not been comprehensively and accurately evaluated due to its dispersion instability.

RESULTS

In this study, novel selenium nanoparticles (SeNPs) with high dispersion stability were successfully prepared using a polysaccharide-protein complex (PSP) as the capping agent. This was isolated from abalone viscera. The average particle size and zeta potential of polysaccharide-protein complex selenium nanoparticles (PSP-SeNPs) were 63.33 nm, and -37.1 mV, respectively. The SeNPs were firmly capped by PSP through SeO and SeN bonds, as demonstrated by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. Due to this capping, the dispersion of PSP-SeNPs remained stable for 12 months at 4 °C, as evidenced by visual inspection and multiple light scattering. Furthermore, PSP-SeNPs imparted an excellent growth-promoting effect on tilapia. The FBW, WGR, and SGR values of tilapia juveniles fed with PSP-SeNPs supplemented diets (0.5-4.5 mg/kg) were significantly higher than those of the control (P < 0.05). A weight gain rate of 4.1%-43.4% and specific growth rate of 0.15%-1.74% were obtained in tilapia during 45-day feeding.

CONCLUSIONS

The use of marine viscera polysaccharides is a promising, green method for the synthesis of selenium nanoparticles. There are good opportunities for the application of the synthesized PSP-SeNPs in the life sciences. © 2020 Society of Chemical Industry.

Green Synthesis of Selenium and Tellurium Nanoparticles: Current Trends, Biological Properties and Biomedical Applications

The synthesis and assembly of nanoparticles using green technology has been an excellent option in nanotechnology because they are easy to implement, cost-efficient, eco-friendly, risk-free, and amenable to scaling up. They also do not require sophisticated equipment nor well-trained professionals. Bionanotechnology involves various biological systems as suitable nanofactories, including biomolecules, bacteria, fungi, yeasts, and plants. Biologically inspired nanomaterial fabrication approaches have shown great potential to interconnect microbial or plant extract biotechnology and nanotechnology. The present article extensively reviews the eco-friendly production of metalloid nanoparticles, namely made of selenium (SeNPs) and tellurium (TeNPs), using various microorganisms, such as bacteria and fungi, and plants' extracts. It also discusses the methodologies followed by materials scientists and highlights the impact of the experimental sets on the outcomes and shed light on the underlying mechanisms. Moreover, it features the unique properties displayed by these biogenic nanoparticles for a large range of emerging applications in medicine, agriculture, bioengineering, and bioremediation.

Role of nano-selenium in health and environment

In recent years, researches on selenium nanoparticle have gained more attention due to its important role in many physiological processes. Generally, selenium nanoparticle has a high level of absorption in regular supplementation comparative to selenium. Therefore it is all-important to develop new techniques to elevate the transportation of selenium compounds (selenoproteins, selenoenzymes, etc.) by increasing their bioavailability, bioactivity, and controlled release. SeNPs have special attention regarding their application as food additives and therapeutic agents. Selenium nanoparticle has biomedical and pharmaceutical uses due to its antioxidant, antimicrobial, antidiabetic, and anticancer effects. Selenium nanoparticle is also used to antagonize the toxic effect of chemical and heavy metals. SeNPs are beneficial for the treatment of water and soil contaminated with metals and heavy metals as it has adsorption capability. Selenium nanoparticle is synthesized by the bioreduction of selenium species (sodium selenate, sodium selenite, selenium dioxide, and selenium tetrachloride, etc.) by using bacteria, fungi, plant, and plant extracts, which have given hope for the bioremediation of selenium contaminated water and soils. This article reviews the procedure of selenium nanoparticle synthesis (physical, chemical and biological methods), characterization (UV-vis spectroscopy, transmission electron microscopy, Scanning electron microscopy, electron dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, etc.), with the emphasis on its role and application in health and environment.

Developments in the study and applications of bacterial transformations of selenium species

Microbial bio-transformations of the essential trace element selenium are now recognized to occur among a wide variety of microorganisms. These transformations are used to convert this element into its assimilated form of selenocysteine, which is at the active center of a number of key enzymes, and to produce selenium nanoparticles, quantum dots, metal selenides, and methylated selenium species that are indispensable for biotechnological and bioremediation applications. The focus of this review is to present the state-of-the-art of all aspects of the investigations into the bacterial transformations of selenium species, and to consider the characterization and biotechnological uses of these transformations and their products.

Effects of process conditions and yeast extract on the synthesis of selenium nanoparticles by a novel indigenous isolate Bacillus sp. EKT1 and characterization of nanoparticles

Selenium nanoparticles (SeNPs) are attractive nanomaterials for application in medical diagnosis, because their toxicities are lower than the elemental selenium which is a functional element and essential for human. In the current study, SeNPs synthesis capability of a novel soil originated indigenous Bacillus isolate was investigated. In this context, effects of processing conditions (SeO₂ concentration, pH, temperature, and time), and yeast extract supplementation on the synthesis of SeNPs have been tested. In addition, nanoparticles were characterized and antioxidant capacity was determined. The cell-free supernatant of the bacterium, which was obtained after the cultivation of the isolate in nutrient broth at 33 °C for 24 h, was used for the synthesis. During the synthesis color change from light yellow to red-orange was an indication of the formation of SeNPs. Effect of SeO₂ concentration was tested on the formation of nanoparticles and at concentrations higher than 10 mM, there was no formation of nanoparticles. The best production was achieved at 6.4 mM concentration, at pH 9 and 33 °C in 72 h. Field emission scanning electron microscopy (FESEM) images revealed that SeNPs were spherical in shape having the diameters between 31 and 335 nm, and the average diameter was determined to be 126 nm. Energy dispersive X-ray spectroscopy analysis confirmed the presence of elemental selenium. SeNPs possessed significant antioxidant activity that the scavenging capacity was up to 56.5 ± 5% (IC₅₀ 322.8 μg/mL).

Selenite reduction by the rhizobacterium Azospirillum brasilense, synthesis of extracellular selenium nanoparticles and their characterisation

Microbial reduction of selenium oxyanions has attracted attention in recent years. In this study, an original and simple method for the synthesis of extracellular selenium nanoparticles (Se NPs) of relatively uniform size has been developed using strains Sp7 and Sp245 of the ubiquitous plant-growth promoting rhizobacterium Azospirillum brasilense, both capable of selenite (SeO₃^2-) reduction. In addition, a reliable purification protocol for the recovery of the Se NPs has been perfected, which could be applied with minor modifications to cultures of other microbial species. Importantly, it was found that, by changing the conditions of bacterial reduction of selenite, extracellularly localised Se NPs can be obtained using bacteria which would otherwise produce intracellular Se NPs. In particular, bacterial cultures grown up to the end of the logarithmic growth phase, washed free of culture medium and then incubated with selenite, were used to obtain extracellular Se NPs. Their sizes depended on the initial selenite concentration (∼25-80 nm in diameter at 50-10 mM selenite, respectively). The Se NPs obtained were characterised by transmission electron microscopy (TEM), dynamic light scattering, as well as Raman and UV-vis spectroscopies. Their zeta potential was found to be negative (ca. minus 21-24 mV). Bacterial selenite reduction was also studied in the presence of the efflux pump inhibitor carbonyl cyanide m-chlorophenylhydrazone (CCCP). In this case, TEM indicated the formation only of intracellular selenium crystallites. The data show that the formation of extracellular Se NPs requires normal bacterial metabolic activity, while CCCP evidently blocks the membrane export of Se⁰ nuclei.

In vitro study of folate-conjugated silver nanoparticles for enhanced anticancer activity

Nanotechnology is developing rapidly for its ability to modify metals to nanosize which, in general, changes the physical, chemical and optical properties of metals. In this paper, the authors used local bacteria from a chromite mine in Sabzevar, Iran, for quick and environmentally friendly biosynthesis of functional silver nanoparticles (AgNPs). The results presented the efficient conditions for AgNP biosynthesis through reduction of silver ions by the supernatant of an Enterobacter sp. strain. After biosynthesis, the AgNPs were cleaned by centrifugation, and samples were further analyzed by ultraviolet–visible spectroscopy, dynamic light scattering (DLS), X-ray diffraction and scanning electron microscopy. The refined AgNPs yielded the best absorbance at 409 nm; the DLS results showed uniform dispersion of nanoparticles, with a standard size of 25–35 nm. The functionality of nanoparticles with proteins was assessed during synthesis and analyzed by Fourier transform infrared spectroscopy. Furthermore, folic acid (folate) was adsorbed. The results revealed that the toxicity of the nanoparticles after folate adsorption on a breast cancer cell line increased and followed a concentration-dependent pattern. Furthermore, the activity of the biologically synthesized AgNPs against Agrobacterium tumefaciens, Pseudomonas aeruginosa, Escherichia coli and Streptococcus pneumoniae was greater than that of the chemically synthesized compound.

Green synthesis of nanoparticles with extracellular and intracellular extracts of basidiomycetes

Au, Ag, Se, and Si nanoparticles were synthesized from aqueous solutions of HAuCl₄, AgNO₃, Na₂SeO₃, and Na₂SiO₃ with extra- and intracellular extracts from the xylotrophic basidiomycetes Pleurotus ostreatus, Lentinus edodes, Ganoderma lucidum, and Grifola frondosa. The shape, size, and aggregation properties of the nanoparticles depended both on the fungal species and on the extract type. The bioreduction of the metal-containing compounds and the formation rate of Au and Ag nanoparticles depended directly on the phenol oxidase activity of the fungal extracts used. The biofabrication of Se and Si nanoparticles did not depend on phenol oxidase activity. When we used mycelial extracts from different fungal morphological structures, we succeeded in obtaining nanoparticles of differing shapes and sizes. The cytotoxicity of the noble metal nanoparticles, which are widely used in biomedicine, was evaluated on the HeLa and Vero cell lines. The cytotoxicity of the Au nanoparticles was negligible in a broad concentration range (1-100 µg/mL), whereas the Ag nanoparticles were nontoxic only when used between 1 and 10 µg/mL.

FTIR and Raman spectroscopic studies of selenium nanoparticles synthesised by the bacterium Azospirillum thiophilum

Vibrational (Fourier transform infrared (FTIR) and Raman) spectroscopic techniques can provide unique molecular-level information on the structural and compositional characteristics of complicated biological objects. Thus, their applications in microbiology and related fields are steadily increasing. In this communication, biogenic selenium nanoparticles (Se NPs) were obtained via selenite (SeO₃^2-) reduction by the bacterium Azospirillum thiophilum (strain VKM B-2513) for the first time, using an original methodology for obtaining extracellular NPs. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) showed the Se NPs to have average diameters within 160-250nm; their zeta potential was measured to be minus 18.5mV. Transmission FTIR spectra of the Se NPs separated from bacterial cells showed typical proteinacious, polysaccharide and lipid-related bands, in line with TEM data showing a thin layer covering the Se NPs surface. Raman spectra of dried Se NPs layer in the low-frequency region (under 500cm^-1 down to 150cm^-1) showed a single very strong band with a maximum at 250cm^-1 which, in line with its increased width (ca. 30cm^-1 at half intensity), can be attributed to amorphous elementary Se. Thus, a combination of FTIR and Raman spectroscopic approaches is highly informative in non-destructive analysis of structural and compositional properties of biogenic Se NPs.