Synthesis of sulfonated carbon-based solid acid as a novel and efficient nanocatalyst for the preparation of highly functionalized piperidines and acylals: a DFT study

Graphene-based catalysts for biodiesel production: Characteristics and performance

Biodiesel is a promising alternative to reduce the dependency on fossil fuels. However, biodiesel's cost is still higher than its petroleum counterpart, hence its production process must be modified to make it economically viable. Microalgae are an alternative feedstock to replace agricultural crops for biodiesel production, and offer several advantages such as fast growth, use of non-arable land, growth in saline and wastewater, and high lipid yield. Unfortunately, biodiesel production from microalgae is very energy-intensive and costly, mainly due to the high energy consumption required for dewatering and drying. Therefore, utilizing wet microalgal biomass instead of dry biomass can be a promising solution to reduce the biodiesel production cost Furthermore, the use of heterogeneous catalysts offers high efficiency, recoverability, and reusability, and is therefore very promising from the economic and environmental perspectives. The unique characteristics of graphene-based nano-catalysts, such as their high surface area, two-dimensional structure, and functional groups, make them suitable candidates for biodiesel production. In this review, the use of graphene-based catalysts for biodiesel production is analyzed in depth, and their efficiency compared to other heterogeneous catalysts is scrutinized. Moreover, their recoverability, reusability, and economic feasibility are critically discussed, and their potential to produce biodiesel from wet microalgae is explored as a sustainable and cost-effective approach.

Superparamagnetic Polyaniline-co-m-phenylenediamine@Fe3O4 Nanocomposite as an Efficient Heterogeneous Catalyst for the Synthesis of 1H-pyrazolo [1,2- a]pyridazine-5,8-diones & 1H-pyrazolo[1,2-b]phthalazine-5, 10-diones" Instead of 1H-pyrazolo[1,2-b] Phthalazinedione Derivatives

BACKGROUND

The use of polymer-based catalysts has increased because of their high potential application as an effective catalyst in organic reactions. They have benefits such as high efficiency and reactivity, simple separation, and safety compared to other heterogeneous catalysts.

AIM AND OBJECTIVE

The objective of the current research is to prepare solid polymer-based catalysts, poly(aniline-co- m-phenylenediamine) (PAmPDA), and its superparamagnetic nanocomposite. Then, the catalytic activity of the resulting superparamagnetic nanocomposite was investigated in the synthesis of 1H-pyrazolo[1,2-b]phetalazine-5,10-diones and 1H-pyrazolo[1,2-a]pyridazine-5,8-dione derivatives. A series of some 1H-pyrazolo[1,2-b]phetalazine-5,10-diones and 1H-pyrazolo[1,2-a]pyridazine-5,8-dione derivatives was tested for its antibacterial properties against the Staphylococcus aureus and E.coli bacteria.

MATERIALS AND METHODS

PAmPDA copolymer was synthesized in a 1:2 molar ratio of Ani to mPDA via radical oxidative polymerization at room temperature. Superparamagnetic PAmPDA@Fe3O4 nanocomposite was synthesized from a mixture of Fe(II), Fe(III) solution, and PAmPDA copolymer via the in-situ co-precipitation technique. 1H-pyrazolo[1,2-b]phetalazine-5,10-diones were synthesized via one-pot three-component condensation reaction of Phthalhydrazide, aromatic aldehyde derivatives, and malononitrile in the presence of PAmPDA under solvent-free conditions at 80 °C. The synthesis of 1Hpyrazolo[1,2-a]pyridazine-5,8-dione derivatives was carried out via a one-pot three-component condensation reaction of maleic hydrazide, aromatic aldehyde derivatives, and malononitrile in the presence of PAmPDA under reflux conditions at EtOH/H2O 1:1. The antibacterial activity of some derivatives was tested against Gram-positive and Gram-negative bacteria.

RESULTS

First, superparamagnetic PAmPDA@Fe3O4 nanocomposite was synthesized and characterized successfully, and then the resulting nanocatalyst was used for the synthesis of pyrazolo[1,2-b]phthalazine and pyrazolo[1,2-a]pyridazine. We obtained the maximum yield of the desired 1H-pyrazolo[1,2- b]phthalazine-5,10 dione derivatives with 0.05 g of catalyst at 80°C, under solvent free conditions, whereby the reaction was complete within 30 min. A wide range of 1H-pyrazolo[1,2-b]phthalazine-5,10 dione derivatives were synthesized in good to excellent yield. On the other hand, pyrazolo[1,2- a]pyridazine derivative was synthesized successfully in high yield using PAmPDA as a nanocatalyst. The antibacterial activity of some derivatives, according to the data (inhibition zone%), showed good activity against Staphylococcus aureus and E.coli.

CONCLUSION

In this research, PAmPDA was used for mild preparation of 1H-pyrazolo [1,2-a]pyridazine5,8-diones & 1H-pyrazolo[1,2-b]phetalazine-5,10-diones derivatives with excellent yields and short reaction times. The attractive features of this protocol are simple procedure, cleaner reaction, and the use of recyclable nanocatalyst. Satisfactory yields of products and easy workup make this a useful protocol for the green synthesis of this class of compounds. The antibacterial activity of some derivatives, according to the data (inhibition zone%), showed good activity against Staphylococcus aureus and E.coli.

Novel Biomass Derived from Grape Pomace Waste as an Efficient Nanocatalyst for the Synthesis of Dibenzoxanthene, Tetraketone, bis(indolyl)alkane and Chromene Derivatives and their Antimicrobial Evaluation

BACKGROUND

Sulfonated carbon-based solid acids (CBSAs) have been reported as an efficient solid acid catalyst for many acid-catalyzed reactions. Furthermore, the use of carbon obtained from biomass waste has been explored and these materials showed a higher catalytic performance and higher stability compared to other solid acids.

OBJECTIVE

Novel biomass carbon-based solid acids nanoparticles with high catalytic activity in organic transformation, such as Grape pomace waste-SO3H Nanoparticles (GPW-SO3H NPs), were successfully synthesized.

MATERIALS AND METHODS

Grape pomace waste-SO3H Nanoparticles (GPW-SO3H NPs) were successfully synthesized. The grape pomace waste was dried in an oven at a temperature of 70°C and crushed to powder using an electric spice grinder. A mixture of powdered grape pomace waste (1 g) and concentrated sulfuric acid (>98%, 10 mL) was stirred at room temperature. Then, the resultant mixture was transferred into a 100 mL sealed Teflon-lined autoclave and kept at 180°C for 12 h. After cooling to room temperature, the resulting black solid was dried at 100°C in an oven under vacuum and the sulfonic acid-functionalized magnetic nanoparticles (Fe3O4@C-SO3H) were obtained.

RESULTS AND DISCUSSIONS

The catalytic activity of GPW-SO3H was assessed through an easy and rapid protocol developed for the one-pot synthesis of 14-aryl-14-H-dibenzo [a,j]xanthene, arylmethylene [bis(3- hydroxy-2-cyclohexene-1-one)], bis(indolyl)alkane and 2-amino-4-aryl-7-hydroxy-4H-chromene-3-carbonitrile derivatives in excellent yields. The advantages of this method include use of waste material for catalyst synthesis, high yields, mild reaction conditions, uncomplicated work-up procedures, neutral conditions, and recoverable catalyst.

CONCLUSION

We have shown that biomass-derived solid acids, prepared from grape pomace waste, serve as a non-toxic, inexpensive and a promising eco-friendly and novel carbon-based solid acid nanocatalyst for organic transformations.

Novel Carbon-based Solid Acid from Green Pistachio Peel as an Efficient Catalyst for the Chemoselective Acylation, Acetalization and Thioacetalization of Aldehydes, Synthesis of Biscoumarins and Antimicrobial Evaluation

Background:

Much attention has been focused on heterogeneous catalysts. Reactions with these recoverable and reusable catalysts are clean, selective with high efficiency. Among the heterogeneous solid acid catalyst in organic synthesis, Carbon-Based Solid Acids (CBSAs), which are important solid acid with many practical and research applications have been extensively studied. In this work, green Pistachio peel, a biomass waste, was converted into a novel carbon-based solid acid catalyst (Pis-SO3H).

Objective:

The aim of this work is to synthesize highly sulfonated carbon as an efficient, recyclable, nontoxic solid acid catalyst by simultaneous sulfonation, dehydration and carbonization of green Pistachio peel as biomass and investigate the catalytic activity of Pis-SO3H in acetalization, thioacetalization, acylation of aldehydes and synthesis of 3,3'-Arylmethylene-bis(4-hydroxycoumarin) derivatives.

Method:

Pis-SO3H was synthesized by an integrated fast one-step hydrothermal carbonization and sulfonation process in the presence of sulfuric acid. The characterization of the physicochemical properties of Pis-SO3H was achieved by XRD, FT-IR, FE-SEM, and elemental analysis.

Results:

The result of acid-base titration showed that the total acidity of the catalyst was 7.75 mmol H+g−1. This new heterogeneous catalyst has been efficiently used for the chemoselective thioacetalization, acetalization and acylation of aldehyde and the synthesis of biscoumarins under solvent-free conditions. All the reactions work easily in high yields. The antimicrobial activity of some of the biscoumarins was evaluated in screening by disk diffusion assay for the zone of inhibition.

Conclusion:

The catalytic activity of the Pis-SO3H was investigated during acetalization, thioacetalization, acylation and synthesis of biscoumarins. The results of protection of carbonyl groups and synthesis of biscoumarins in the present work offer effective alternatives for environmentally friendly utilization of abundant biomass waste.

Biodiesel production from wet microalgae by using graphene oxide as solid acid catalyst

In order to produce biodiesel from lipids in wet microalgae with graphene oxide (GO) as solid acid catalyst, the effects on lipids conversion efficiencies of catalyst dosage, transesterification temperature, reaction time, methanol dosage and chloroform dosage were investigated. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis revealed that GO contained 0.997mmol SO₃H groups per gram and high amounts of OH groups. Scanning electron microscopy showed that wet microalgae cells were adsorbed on hydrophilic GO surfaces covered with many OH groups. Lipids extracted by chloroform from microalgal cells were transformed into fatty acids methyl esters (FAMEs) through transesterification catalyzed by the acid centers (SO₃H groups) in GO catalysts. The lipids conversion efficiency into FAMEs was 95.1% in microwave-assisted transesterification reactions of 5wt.% GO catalyst at 90°C for 40min.