High selective colorimetric detection of Cd2+ ions using cysteamine functionalized gold nanoparticles with cross-linked DL-glyceraldehyde

Lab-on-a-disc for ultrafast plasmonic assay of cysteamine

Cysteamine (CA) is a cystine depleting agent used in the treatment of cystinosis and many other diseases. However, high dose of CA can be toxic and thus point-of-care-test devices measuring blood CA level can be highly beneficial. Here, we report a highly sensitive, straightforward, and quantitative assay for the colorimetric and spectroscopic determination of CA concentration using plasmonic nanoparticles. The principle is based on the chemical etching-induced exchange of the surface ligands of plasmonic gold nanoparticles (AuNPs) upon the addition of CA. Moreover, destabilized particles can aggregate to generate the plasmonic couplings that trigger the redshift in the ultraviolet-visible (UV-vis) spectrum (the absorption band shifted from 526 to 732 nm) and the solution color change (wine-red to blackish-blue). This plasmonic AuNPs sensor displays a clear red-to-blue colorimetric transition in the presence of CA among various biothiols with high specificity and sensitivity within a short time (<15 s). Furthermore, a lab-on-a-disc platform was applied to the analysis of blood samples donated by healthy volunteers spiked with known amounts of the CA standard solution. This fully automated lab-on-a-disc platform approach for naked eye detecting the CA concentration in human blood samples (20 μL) is highly simple and time-efficient (<6 min), and it would be potentially useful for the careful selection of CA doses in the hospital industry.

Visual monitoring and optical recognition of digoxin by functionalized AuNPs and triangular AgNPs as efficient optical nano-probes

In this study, we presented elective, sensitive, and rapid UV-Vis spectrophotometry and calorimetric assay for the recognition of digoxin. Therefore, cysteamine-gold nanoparticles (Cys A-AuNPs) in the presence of cysteine acid amine and Silver nanoparticles in the presence of tetramethyl benzidine and hydrogen peroxide (AgNPs-TMB [3,3',5,5'-tetramethylbenzidine]-H₂ O₂ ) were synthesized and utilized as the desired probe. Finally, color variation of probes was observed in the absence and presence of digoxin. Obtained results indicate that the color of Cys A-AuNPs changed from dark pink to light in the absence and the presence of digoxin, respectively. Also, the color of AgNPs-TMB-H₂ O₂ changed from dark blue to light blue, in the absence and the presence of digoxin, respectively. Moreover, UV-Vis spectroscopies results indicate digoxin with a low limit of quantification of 0.125 ppm in human plasma samples which linear range was 0.125 to 11 ppm.

Fabrication, calibration, and preliminary testing of microcantilever-based piezoresistive sensor for BioMEMS applications

In this study, the authors demonstrate the fabrication, calibration, and testing of a piezoresistive microcantilever-based sensor for biomedical microelectromechanical system (BioMEMS) application. To use any sensor in BioMEMS application requires surface modification to capture the targeted biomolecules. The surface alteration comprises self-assembled monolayer (SAM) formation on gold (Au)/chromium (Cr) thin films. So, the Au/Cr coating is essential for most of the BioMEMS applications. The fabricated sensor uses the piezoresistive technique to capture the targeted biomolecules with the SAM/Au/Cr layer on top of the silicon dioxide layer. The stiffness (k) of the cantilever-based biosensor is a crucial design parameter for the low-pressure range and also influence the sensitivity of the microelectromechanical system-based sensor. Based on the calibration data, the average stiffness of the fabricated microcantilever with and without Au/Cr thin film is 141.39 and 70.53 mN/m, respectively, which is well below the maximum preferred range of stiffness for BioMEMS applications. The fabricated sensor is ultra-sensitive and selective towards Hg²⁺ ions in the presence of other heavy metal ions (HMIs) and good enough to achieve a lower limit of detection 0.75 ng/ml (3.73 pM/ml).

Ultrasensitive detection of cadmium ions using a microcantilever-based piezoresistive sensor for groundwater

This paper proposes the selective and ultrasensitive detection of Cd(II) ions using a cysteamine-functionalized microcantilever-based sensor with cross-linked ᴅʟ-glyceraldehyde (DL-GC). The detection time for various laboratory-based techniques is generally 12-24 hours. The experiments were performed to create self-assembled monolayers (SAMs) of cysteamine cross-linked with ᴅʟ-glyceraldehyde on the microcantilever surface to selectively capture the targeted Cd(II). The proposed portable microfluidic platform is able to achieve the detection in 20-23 min with a limit of detection (LOD) of 0.56 ng (2.78 pM), which perfectly describes its excellent performance over other reported techniques. Many researchers used nanoparticle-based sensors for the detection of heavy metal ions, but daily increasing usage and commercialization of nanoparticles are rapidly expanding their deleterious effect on human health and the environment. The proposed technique uses a blend of thin-film and microcantilever (micro-electromechanical systems) technology, which mitigate the disadvantages of the nanoparticle approaches, for the selective detection of Cd(II) with a LOD below the WHO limit of 3 μg/L.

Cysteamine-coated gold nanoparticles for bimodal colorimetric detection with inverse sensitivity: a proof-of-concept with lysozyme

Cysteamine-coated gold nanoparticles (cysAuNPs) are positively charged as-synthesised and hence can interact with negatively charged DNA with ease. We have investigated the dependency of the particles' dispersion stage on different concentrations of lysozyme-binding aptamer (LBA). On top of the commonly reported phenomenon where cysAuNPs aggregate as the concentration of LBA increases, we observed that cysAuNPs redispersed after the amount of LBA achieved a certain threshold, dubbed as the critical redispersion concentration (CRC). By harnessing the aggregation and dispersion behaviour of cysAuNPs at LBA below and above the CRC, respectively, we have demonstrated a bimodal colorimetric aptasensor to detect lysozyme as a proof-of-concept study. Apart from being able to quantify the lysozyme in different ranges of concentrations with a visual change in colour, this aptasensor also demonstrated a novel concept of inverse sensitivity (i.e. higher signal with less analyte), leading to a 24-fold higher of signal-to-noise ratio (SNR), in comparison to the conventional sensors. The aptasensor can also selectively distinguish lysozyme and eliminate false results from other control proteins via both modes. The generalisability, as well as potential of cysAuNPs for bimodal colorimetric detection and inverse sensitivity behaviour have made this material an interesting alternative to citrate-coated AuNPs.

An aptasensor derived from cysteamine-gold nanoparticles for bimodal colorimetric detection and with inverse sensitivity pattern.