Synthesis of CeO2-NPs by chemical and biological methods and their photocatalytic, antibacterial and in vitro antioxidant activity

Size dependent dual functionality of CeO2 quantum dots: A correlation among parameters for hydrogen gas sensor and pollutant remediation

The metal oxide-based nanostructures of variable size and shape are found effective in optimizing the gas sensing ability and pollutant degradation. The size induced lattice strain and large band gap in 3nm CeO2 quantum dots evolved the ability towards hydrogen gas sensing and dye degradation compared to nanopebbles and nanoparticles of sizes 15 ± 3, and 30 ± 12 nm. The smaller CeO2 quantum dots than Debye length was found underlying reason for nearly four times sensor response and selectivity towards reducing hydrogen gases than the oxidizing gases at 1-10 ppm level. The lattice strain calculated by Rietveld refinement and W-H analysis was found in-line with the size of CeO2 nanostructures. The enhancement in lattice strain and optical band gap (2.66, 2.78, and 2.89 eV) with decrease in size are found critical for determining the overall efficiency of CeO2 nanostructures for photocatalytic activity, attributed to the strong quantum confinement effect. The higher catalytic activity of 98 % was achieved CeO2 quantum dots in comparison to the 95 % and 94 % obtained for CeO2 nanopebbles and nanoparticles. The impact of change in degradation efficacy and gas sensing ability of different CeO2 nanomaterials is discussed in detail. This work offers a novel and simplistic method to produce CeO2 quantum dots as an efficient sensor for selective detection of H2 gas and photocatalyst. The correlation between size, Debye length, band gap, and lattice strain gives an insight for understanding the underlying detection mechanism for selective detection of reducing gas molecules and efficient pollutant remediation.

Towards nanostructured red-ox active bio-interfaces: Bioinspired antibacterial hybrid melanin-CeO2 nanoparticles for radical homeostasis

Redox-active nano-biointerfaces are gaining weight in the field of regenerative medicine since they can act as enzymes in regulating physiological processes and enabling cell homeostasis, as well as the defense against pathogen aggression. In particular, cerium oxide nanoparticles (CeO2 NPs) stand as intriguing enzyme-mimicking nanoplatforms, owing to the reversible Ce+3/Ce+4 surface oxidation state. Moreover, surface functionalization leads to higher catalytic activity and selectivity, as well as more tunable enzyme-mimicking performances. Conjugation with melanin is an adequate strategy to boost and enrich CeO2 NPs biological features, because of melanin redox properties accounting for intrinsic antioxidant, antimicrobial and anti-inflammatory power. Herein, hybrid Melanin/CeO2 nanostructures were designed by simply coating the metal-oxide nanoparticles with melanin chains, obtained in-situ through ligand-to-metal charge transfer mechanism, according to a bioinspired approach. Obtained hybrid nanostructures underwent detailed physico-chemical characterization. Morphological and textural features were investigated through TEM, XRD and N2 physisorption. The nature of nanoparticle-melanin interaction was analyzed through FTIR, UV-vis and EPR spectroscopy. Melanin-coated hybrid nanostructures exhibited a relevant antioxidant activity, confirmed by a powerful quenching effect for DPPH radical, reaching 81 % inhibition at 33 μg/mL. A promising anti-inflammatory efficacy of the melanin-coated hybrid nanostructures was validated through a significant inhibition of BSA denaturation after 3 h. Meanwhile, the enzyme-mimicking activity was corroborated by a prolonged peroxidase activity after 8 h at 100 μg/mL and a relevant catalase-like action, by halving the H2O2 level in 30 min at 50 μg/mL. Antimicrobial assays attested that conjugation with melanin dramatically boosted CeO2 biocide activity against both Gram (-) and Gram (+) strains. Cytocompatibility tests demonstrated that the melanin coating not only enhanced the CeO2 nanostructures biomimicry, resulting in improved cell viability for human dermal fibroblast cells (HDFs), but mostly they proved that Melanin-CeO2 NPs were able to control the oxidative stress, modulating the production of nitrite and reactive oxygen species (ROS) levels in HDFs, under physiological conditions. Such remarkable outcomes make hybrid melanin-CeO2 nanozymes, promising redox-active interfaces for regenerative medicine.

Green Synthesis of NiO Nanoflakes Using Bitter Gourd Peel, and Their Electrochemical Urea Sensing Application

To determine urea accurately in clinical samples, food samples, dairy products, and agricultural samples, a new analytical method is required, and non-enzymatic methods are preferred due to their low cost and ease of use. In this study, bitter gourd peel biomass waste is utilized to modify and structurally transform nickel oxide (NiO) nanostructures during the low-temperature aqueous chemical growth method. As a result of the high concentration of phytochemicals, the surface was highly sensitive to urea oxidation under alkaline conditions of 0.1 M NaOH. We investigated the structure and shape of NiO nanostructures using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). In spite of their flake-like morphology and excellent crystal quality, NiO nanostructures exhibited cubic phases. An investigation of the effects of bitter gourd juice demonstrated that a large volume of juice produced thin flakes measuring 100 to 200 nanometers in diameter. We are able to detect urea concentrations between 1-9 mM with a detection limit of 0.02 mM using our urea sensor. Additionally, the stability, reproducibility, repeatability, and selectivity of the sensor were examined. A variety of real samples, including milk, blood, urine, wheat flour, and curd, were used to test the non-enzymatic urea sensors. These real samples demonstrated the potential of the electrode device for measuring urea in a routine manner. It is noteworthy that bitter gourd contains phytochemicals that are capable of altering surfaces and activating catalytic reactions. In this way, new materials can be developed for a wide range of applications, including biomedicine, energy production, and environmental protection.

Green synthesis of copper oxide nanoparticles using Ephedra Alata plant extract and a study of their antifungal, antibacterial activity and photocatalytic performance under sunlight

In the present work, copper oxide (CuO NPs) was synthesized by an eco-friendly, simple, low-cost, and economical synthesis method using Ephedra Alata aqueous plant extract as a reducing and capping agent. The biosynthesized CuO-NPs were compared with chemically obtained CuO-NPs to investigate the effect of the preparation method on the structural, optical, morphological, antibacterial, antifungal, and photocatalytic properties under solar irradiation. The CuO NPs were characterized using X-ray diffraction (XRD), UV-VIS spectroscopy, Fourier transform infrared spectrometer (FTIR) analysis, and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX). The photocatalytic activities of biosynthetic CuO-NPs and chemically prepared CuO-NPs were studied using methylene blue upon exposure to solar irradiation. The results showed that the biosynthesized CuO photocatalyst was more efficient than the chemically synthesized CuO-NPs for Methylene Blue (MB) degradation under solar irradiation, with MB degradation rates of 93.4% and 80.2%, respectively. In addition, antibacterial and antifungal activities were evaluated. The disk diffusion technique was used to test the biosynthesized CuO-NPs against gram-negative bacteria, Staphylococcus aureus and Bacillus subtilis, as well as C. Albicans and S. cerevisiae. The biosynthesized CuO-NPs showed efficient antibacterial and antifungal activity. The obtained results revealed that the biosynthesized CuO-NPs can play a vital role in the destruction of pathogenic bacteria, the degradation of dyes, and the activity of antifungal agents in the bioremediation of industrial and domestic waste.

A simple method for the preparation of CeO2with high antioxidant activity and wide application range

Cerium oxide (CeO₂) is a well-known antioxidant with the ability to scavenge reactive oxygen species due to its unique electronic structure and chemical properties. Although many methods to enhance the antioxidant activity of CeO₂have been reported, its antioxidant activity is still not high enough, and some enhancement effects are limited by the material concentration. There are also some CeO₂obtained with high antioxidant activity at high concentrations, which is not conducive to the application of biomedicine. Therefore, it is urgent to obtain CeO₂material with low cell cytotoxicity, high antioxidant activity and wide application range. In this work, rod-like metal organic framework derived CeO₂(CeO₂-MOF) was prepared by a simple method. Compared with the CeO₂nanorods prepared by hydrothermal method, it shows better antioxidant activity compared with the CeO₂nanorods prepared by hydrothermal method. Moreover, the advantage of CeO₂-MOF's antioxidant activity is not affected by the hydroxyl radical and material concentrations The reason why CeO₂-MOF has higher antioxidant activity should be attributed to its higher Ce³⁺content and larger specific surface area. In addition, CeO₂-MOF also exhibits low cytotoxicity to HeLa cells and PC12 cellsin vitro. The strategy of using MOF as a structural and compositional material to create CeO₂provides a new method to explore highly efficient and biocompatible CeO₂for practical applications.

Efficacy of Green Cerium Oxide Nanoparticles for Potential Therapeutic Applications: Circumstantial Insight on Mechanistic Aspects

Green synthesized cerium oxide nanoparticles (GS-CeO₂ NPs) have a unique size, shape, and biofunctional properties and are decorated with potential biocompatible agents to perform various therapeutic actions, such as antimicrobial, anticancer, antidiabetic, and antioxidant effects and drug delivery, by acquiring various mechanistic approaches at the molecular level. In this review article, we provide a detailed overview of some of these critical mechanisms, including DNA fragmentation, disruption of the electron transport chain, degradation of chromosomal assemblage, mitochondrial damage, inhibition of ATP synthase activity, inhibition of enzyme catalytic sites, disorganization, disruption, and lipid peroxidation of the cell membrane, and inhibition of various cellular pathways. This review article also provides up-to-date information about the future applications of GS-CeONPs to make breakthroughs in medical sectors for the advancement and precision of medicine and to effectively inform the disease diagnosis and treatment strategies.