On the correlation between Raman spectra and structural properties of activated carbons derived by hyper-crosslinked polymers

3D carbon aerogel from waste corrugated cardboard as a photothermal reservoir for solar steam generation

Three-dimensional carbon aerogel (CA800) was prepared from waste corrugated cardboard (WCC) by the procedure of slurrying, solvent replacement, drying, and carbonization in turn, and the product was explored as an all-in-one evaporator for solar steam generation without bulk water. Carbonization of the precursor was investigated using thermogravimetric analyzer coupled with Fourier transform infrared spectrometer. Results showed that CO2, CO, furfural, and levoglucosan were released during pyrolysis of WCC within the range of 300 to 390 °C, while polymerization of newly formed char between 390 and 580 °C mainly resulted in the formation of CO2 and CO. Both pyrolysis and polymerization reactions can be described by diffusion-controlled mechanisms, and the activation energies were 155.62 and 11.17 kJ mol-1, respectively. CA800 possessed a BET surface area of 210 m2 g-1. Light can be effectively absorbed and converted into heat by CA800, and its surface temperature achieving 73 °C under 1 kW m-2 irradiation. CA800 had outstanding wettability due to the presence of hydrophilic minerals in carbon matrix, and it was able to store as much as 15 times its own weight in water due to its abundant interconnected channels and hierarchical nanopores. Solar-driven water evaporation rate over CA800 achieved 1.72 kg m-2 (normalized to projection area), which was nearly 6 times higher than the value achieved by the bare water system. The photothermal conversion efficiency was calculated to be 118 %, and the overestimated efficiency was caused by the environmental energy gained by the cold evaporation surface of CA800.