Visible-light-driven heterostructure Ag/Bi2WO6 nanocomposites synthesized by photodeposition method and used for photodegradation of rhodamine B dye

Recent Progress in Photocatalytic Degradation of Water Pollution by Bismuth Tungstate

Photocatalysis has emerged as a highly promising, green, and efficient technology for degrading pollutants in wastewater. Among the various photocatalysts, Bismuth tungstate (Bi2WO6) has gained significant attention in the research community due to its potential in environmental remediation and photocatalytic energy conversion. However, the limited light absorption ability and rapid recombination of photogenerated carriers hinder the further improvement of Bi2WO6's photocatalytic performance. This review aims to present recent advancements in the development of Bi2WO6-based photocatalysts. It delves into the photocatalytic mechanism of Bi2WO6 and summarizes the achieved photocatalytic characteristics by controlling its morphology, employing metal and non-metal doping, constructing semiconductor heterojunctions, and implementing defective engineering. Additionally, this review explores the practical applications of these modified Bi2WO6 photocatalysts in wastewater purification. Furthermore, this review addresses existing challenges and suggests prospects for the development of efficient Bi2WO6 photocatalysts. It is hoped that this comprehensive review will serve as a valuable reference and guide for researchers seeking to advance the field of Bi2WO6 photocatalysis.

A facile two-step hydrothermal preparation of 2D/2D heterostructure of Bi2WO6/WS2 for the efficient photodegradation of methylene blue under sunlight

A facile two-step hydrothermal method was successfully used to prepare a photocatalyst Bi2WO6/WS2 heterojunction for methyl blue (MB) photodegradation. Fabricated photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). Band gap measurements were carried out by diffuse reflectance spectroscopy (DRS). Results indicated that the prepared heterostructure photocatalyst has increased visible light absorption. Photocatalytic performance was evaluated under sunlight irradiation for methylene blue (MB) degradation as a model dye. Variations in pH (4-10), amount of catalyst (0.025-0.1 g/L), and initial MB concentrations (5-20 ppm) were carried out, whereas all prepared catalysts were used to conduct the tests with a visible spectrophotometer. Degradation activity improved with the pH increase; the optimum pH was approximately 8. Catalyst concentration is directly related to degradation efficiency and reached 93.56% with 0.075 g of the catalyst. Among tested catalysts, 0.01 Bi2WO6/WS2 has exhibited the highest activity and a degradation efficiency of 99.0% in 40 min (min) for MB. MB photodegradation follows pseudo-first-order kinetics, and obtained values of kapp were 0.0482 min-1, 0.0337 min-1, 0.0205 min-1, and 0.0087 min-1 for initial concentrations of 5 ppm, 10 ppm, 15 ppm, and 20 ppm, respectively. The catalyst was reused for six cycles with a negligible decrease in the degradation activity. Heterostructure 0.01 Bi2WO6/WS2 has exhibited a photocurrent density of 16 μA cm-2, significantly higher than 2.0 and 4.5 μA cm-2 for the pristine WS2 and Bi2WO6, respectively. The findings from these investigations may serve as a crucial stepping stone towards the remediation of polluted water facilitated by implementing such highly efficient photocatalysts.

Charge separation effect in the nanocomposites of Co3O4-QDs: visible light photocatalytic dye degradation in aqueous solutions

Photo-treatment of water is a promising environmentally friendly process that provides clean water and makes wastewater reusable in industry. Thus, efforts toward finding highly efficient photocatalysts have gained a huge attention to remove the organic contaminants in water. Quantum dots (QDs) are extensively utilized for photocatalytic remediation regarding their prominent optical, electrical, and chemical properties. Herein, we report the highly efficient and environmentally friendly synthesis of Co₃O₄-QDs-based graphene quantum dots (GQDs) and infinite coordination polymer comprising Zn nodes (Zn-ICP) nanocomposites as active and robust photocatalysts for photo-assisted water treatment. The pristine Co₃O₄-QDs, GQDs, and Zn-ICP showed lower activity under visible light. However, after functionalization of GQDs and Zn-ICP with Co₃O₄-QDs, the activity increased, and more photocatalytic efficiency was achieved. For instance, Zn-ICP, GQDs, Co₃O₄-QDs, Co₃O₄-QDs/Zn-ICP, and Co₃O₄-QDs/GQD degraded 21, 19, 52, 73, and 83% of rhodamine B (RhB) and 34, 46, 50, 73, and 76% of methylene blue (MB) after 60 min. The high photocatalytic efficiency was ascribed to the conjugation of Co₃O₄-QDs with GQDs and Zn-ICP which causes efficient absorption of visible light. The existence of Co₃O₄-QDs was found to be essential not only for effective charge separation but also widening the region of light absorption followed by increase in photocatalytic performances. Charge separation in photocatalytic reactions, energy levels of nanocomposites, and mechanism of the photocatalytic process were investigated by photoluminescence spectra (PL), Mott-Schottky, electrochemical impedance (EIS), and diffuse reflectance UV-Vis spectroscopy (DRS).

A Photocatalytic Hydrolysis and Degradation of Toxic Dyes by Using Plasmonic Metal–Semiconductor Heterostructures: A Review

Converting solar energy to chemical energy through a photocatalytic reaction is an efficient technique for obtaining a clean and affordable source of energy. The main problem with solar photocatalysts is the recombination of charge carriers and the large band gap of the photocatalysts. The plasmonic noble metal coupled with a semiconductor can give a unique synergetic effect and has emerged as the leading material for the photocatalytic reaction. The LSPR generation by these kinds of materials has proved to be very efficient in the photocatalytic hydrolysis of the hydrogen-rich compound, photocatalytic water splitting, and photocatalytic degradation of organic dyes. A noble metal coupled with a low bandgap semiconductor result in an ideal photocatalyst. Here, both the noble metal and semiconductor can absorb visible light. They tend to produce an electron–hole pair and prevent the recombination of the generated electron–hole pair, which ultimately reacts with the chemicals in the surrounding area, resulting in an enhanced photocatalytic reaction. The enhanced photocatalytic activity credit could be given to the shared effect of the strong SPR and the effective separation of photogenerated electrons and holes supported by noble metal particles. The study of plasmonic metal nanoparticles onto semiconductors has recently accelerated. It has emerged as a favourable technique to master the constraint of traditional photocatalysts and stimulate photocatalytic activity. This review work focuses on three main objectives: providing a brief explanation of plasmonic dynamics, understanding the synthesis procedure and examining the main features of the plasmonic metal nanostructure that dominate its photocatalytic activity, comparing the reported literature of some plasmonic photocatalysts on the hydrolysis of ammonia borane and dye water treatment, providing a detailed description of the four primary operations of the plasmonic energy transfer, and the study of prospects and future of plasmonic nanostructures.

Construction of a flower-like S-scheme Bi2WO6/BiOCl nano-heterojunction with enhanced visible-light photocatalytic properties

A series of flower-like Bi2WO6/BiOCl photocatalyst were synthesized by a facile hydrothermal method. S-scheme Bi2WO6/BiOCl-3 nano-heterojunction exhibits the excellent photocatalytic activity for degradation of RhB under visible light irradiation.