Multiscale Characterization of Wettability in Porous Media

Insights into the Microscopic Oil-Water Flow Characteristics and Displacement Mechanisms during Waterflooding in Sandstone Reservoir Rock Based on Micro-CT Technology: A Pore-Scale Numerical Simulation Study

The low oil recovery rate observed in current oil fields is largely attributed to the presence of remaining oil trapped in the pores of porous media during waterflooding. To improve the recovery rate, it is imperative to gain an understanding of the oil-water flow characteristics and displacement mechanisms during waterflooding, as well as to elucidate the underlying mobilization mechanisms of residual oil at the pore scale. In this paper, we explore these issues in depth by numerically investigating the influence of factors such as water injection velocities, oil-water viscosity ratios, and wettability conditions on pore-scale oil-water flow characteristics and oil recovery rate. To this end, we employ a direct numerical simulation (DNS) method in conjunction with the volume of fluid (VOF) method to study the microscopic displacement mechanisms of waterflooding in a reconstructed two-dimensional digital rock core based on micro-CT technology. In addition, the particle tracing method is adopted to identify the flow path and dominant areas during waterflooding in order to mobilize the residual oil within the pores. The findings indicate that the oil-water flow characteristics in porous media are determined by the interplay between capillary and viscous forces. Furthermore, the oil recovery rate is 10.6% and 24.7% lower under strong water-wet and oil-wet conditions than that (32.36%) under intermediate wettability conditions, and the final oil recovery rate is higher under water-wet conditions than under oil-wet conditions. The seepage path and the dominant areas are directly linked to the capillarity formed during waterflooding. The findings of this study are significant in terms of enhancing the recovery rate of residual oil and provide a novel perspective for understanding the waterflooding process.

Standardization of Particle Size for Floating Particle Wettability Measurement for Carbonate Rocks

Misrepresentation of the wettability of a reservoir can lead to potentially low ultimate hydrocarbon recovery resulting in substantial economic losses. At the same time, it is impossible to determine the wettability of a reservoir across its length and breadth on a continuous basis using standard procedures. This work presents the development and standardization of a quick, easy, and low-cost wettability measurement method using the adherence tendency of rock particles in the oil or aqueous phase. The most important aspect of this study was establishing the optimum particle size for sustained floatation and balancing the buoyancy and gravity effect. The results show that the particles sink with a larger than optimum particle size because of the gravity effect. Similarly, the particles would float if they are smaller than optimum due to buoyancy and viscosity advantages. A new scale is designed, and the midpoint analysis shows that a 63-90 μm particle size is the ideal size range for the carbonate reservoir's wettability measurements, as the midpoint of the size distribution coincides with the standard Amott-Harvey (A-H) index. However, this size range is found to be wider for oil-wet particles. The floating particle method has several advantages over the established methods once standardized against a reliable process. Not only is the process fast but it can be performed with basic laboratory tools and does not require a high skill set. Most importantly, reliable wettability information can be obtained from drill cuttings and core fragments, enabling the determination of reservoir wettability on a continuum basis and not as a point basis, thus providing a more reliable average value, particularly for heterogeneous and unconsolidated reservoirs.

A Closed-Form Equation for Capillary Pressure in Porous Media for All Wettabilities

A saturation–capillary pressure relationship is proposed that is applicable for all wettabilities, including mixed-wet and oil-wet or hydrophobic media. This formulation is more flexible than existing correlations that only match water-wet data, while also allowing saturation to be written as a closed-form function of capillary pressure: we can determine capillary pressure explicitly from saturation, and vice versa. We propose $$P_{{\text{c}}} = A + B\tan \left( {\frac{\pi }{2} - \pi S_{e}^{C} } \right)\,{\text{for}}\,0 \le S_{{\text{e}}} \le 1,$$ P c = A + B tan π 2 - π S e C for 0 ≤ S e ≤ 1 , where $$S_{{\text{e}}}$$ S e is the normalized saturation. A indicates the wettability: $$A>0$$ A > 0 is a water-wet medium, $$A<0$$ A < 0 is hydrophobic while small A suggests mixed wettability. B represents the average curvature and pore-size distribution which can be much lower in mixed-wet compared to water-wet media with the same pore structure if the menisci are approximately minimal surfaces. C is an exponent that controls the inflection point in the capillary pressure and the asymptotic behaviour near end points. We match the model accurately to 29 datasets in the literature for water-wet, mixed-wet and hydrophobic media, including rocks, soils, bead and sand packs and fibrous materials with over four orders of magnitude difference in permeability and porosities from 20% to nearly 90%. We apply Leverett J-function scaling to make the expression for capillary pressure dimensionless and discuss the behaviour of analytical solutions for spontaneous imbibition.

Capillary imbibition and flow of wetting liquid in irregular capillaries: A 100-year review

Capillary imbibition, such as plant roots taking up water, reservoir rocks absorbing brine and a tissue paper wiping stains, is pervasive occurred in nature, engineering and industrial fields, as well as in our daily life. This phenomenon is earliest modeled through the process that wetting liquid is spontaneously propelled by capillary pressure into regular geometry models. Recent studies have attracted more attention on capillary-driven flow models within more complex geometries of the channel, since a detailed understanding of capillary imbibition dynamics within irregular geometry models necessitates the fundamentals to fluid transport mechanisms in porous media with complex pore topologies. Herein, the fundamentals and concepts of different capillary imbibition models in terms of geometries over the past 100 years are reviewed critically, such as circular and non-circular capillaries, open and closed capillaries with triangular/rectangular cross-sections, and heterogeneous geometries with axial variations. The applications of these models with appropriate conditions are discussed in depth accordingly, with a particular emphasize on the capillary flow pattern as a consequence of capillary geometry. In addition, a universal model is proposed based on the dynamic wetting condition and equivalent cylindrical geometry to describe the capillary imbibition process in terms of various solid topologies. Finally, future research is suggested to focus on analyzing the dynamics during corner flow, the snap-off of wetting fluid, the capillary rise of non-Newtonian fluids and applying accurate physical simulation methods on capillary-driven flow processes. Generally, this review provides a comprehensive understanding of the capillary-driven flow models inside various capillary geometries and affords an overview of potential advanced developments to enhance the current understanding of fluid transport mechanisms in porous media.

Wettability of Carbonate Reservoir Rocks: A Comparative Analysis

Various methods have been proposed for the evaluation of reservoir rock wettability. Among them, Amott–Harvey and USBM are the most commonly used approaches in industry. Some other methods, such as the Lak and modified Lak indices, the normalized water fractional flow curve, Craig’s triple rules of thumb, and the modified Craig’s second rule are based on relative permeability data. In this study, a set of capillary pressure curves and relative permeability experiments was conducted on 19 core plug samples from a carbonate reservoir to evaluate and compare different quantitative and qualitative wettability indicators. We found that the results of relative permeability-based approaches were consistent with those of Amott–Harvey and USBM methods. We also investigated the relationship between wettability indices and rock quality indicators RQI, FZI, and Winland R35. Results showed that as the rock quality indicators increased, the samples became more oil-wet.