Bischelated complexes of a dithiocarbazate N,S Schiff base ligand: synthesis, characterization and antimicrobial activities

Bis[S-octyl 3-(2-methyl-propyl-idene)di-thio-carb-az-ato-κ2N3,S]nickel(II)

The central NiII atom in the title complex, [Ni(C13H25N2S2)2], is located on an inversion center and adopts a roughly square-planar coordination environment defined by two chelating N,S donor sets of two symmetry-related ligands in a trans configuration. The Ni-N and Ni-S bond lenghts are 1.9193 (14) and 2.1788 (5) Å, respectively, with a chelating N-Ni-S bond angle of 86.05 (4)°. These data are compared with those measured for similar di-thio-carbazato ligands that bear n-octyl or n-hexyl alkyl chains. Slight differences are observed with respect to the phenyl-ethyl-idene derivative where the ligands are bound cis relative to one another.

Crystal structure of S-n-octyl 3-(1-phenyl-ethyl-idene)di-thio-carbazate and of its bis-chelated nickel(II) complex

The nitro-gen-sulfur Schiff base proligand S-n-octyl 3-(1-phenyl-ethyl-idene)di-thio-carbazate, C17H26N2S2 (HL), was prepared by reaction of S-octyl di-thio-carbamate with aceto-phenone. Treatment of HL with nickel acetate yielded the complex bis-[S-n-octyl 3-(1-phenyl-ethyl-idene)di-thio-carbazato]nickel(II), [Ni(C17H25N2S2)2] (NiL 2), which was shown to adopt a tetra-hedrally distorted cis-square-planar coordination geometry, with the NiSN planes of the two ligands forming a dihedral angle of 21.66 (6)°. Changes in the geometry of the L ligand upon chelation of Ni2+ are described, involving a ca 180° rotation around the N(azomethine)-C(thiol-ate) bond.

Crystal structure of bis-{S-octyl-3-[(thio-phen-2-yl)methyl-idene]di-thio-carbazato-κ2N3,S}nickel(II)

In the title complex, [Ni(C14H21N2S3)2], the nickel(II) atom is located on a crystallographic inversion center and exhibits a square-planar coordination environment, being coordinated by two negatively charged N,S-chelating ligands in a trans configuration. In the crystal, the non-H atoms of the complex are practically coplanar (r.m.s. deviation of fitted atoms = 0.135 Å), and the angle between the thienyl and the chelating rings is 6.7 (1)°. The mol-ecules stack at a distance of 3.623 (2) Å along the b-axis direction.

Computational and experimental insight into antituberculosis agent, (E)-benzyl-2-(4-hydroxy-2-methoxybenzylidene) hydrazinecarbodithioate: ADME analysis

A new Schiff base, (E)-benzyl-2-(4-hydroxy-2-methoxybenzylidene)hydrazinecarbodithioate (compound 1) has been synthesized and experimentally characterized by the IR, UV-Vis, ¹H-NMR and mass spectroscopies. The theoretical study of the synthesized compound was evaluated using the density functional theory (DFT) at B3LYP/6-31G+(d,p) basis set. The electronic absorption spectrum of compound 1 was evaluated using time-dependent density functional theory. Besides, in silico studies were done for the prediction of absorption, distribution, metabolism and excretion profiles of compound 1. According to the result, the theoretical data were well fitted with the experimental values. The studied compound has low chemical reactivity and high kinetic stability. In the molecular electrostatic potential map, the negative and positive potential sites were found around electronegative atoms and hydrogen atoms of compound 1, respectively. The 97.75% Lewis and 2.25% non-Lewis structure were present in the studied molecule. The molecular docking results reveal that compound 1 can be used as antituberculosis agent as compare to ethambutol.

Synthesis, characterization of ruthenium(II), nickel(II), palladium(II), and platinum(II) triphenylphosphine-based complexes bearing an ONS-donor chelating agent: Interaction with biomolecules, antioxidant, in vitro cytotoxic, apoptotic activity and cell cycle analysis

Four new transition metal complexes, [M(PPh₃)(L)]^.CH₃OH (M = Ni(II) (1), Pd(II) (2)) [Pt (PPh₃)₂(HL)]Cl (3) and [Ru(CO)(PPh₃)₂(L)] (4) (H₂L = 2,4-dihydroxybenzaldehyde-S-methyldithiocarbazate, PPh₃ = triphenylphosphine) have been synthesized and characterized by elemental analyses (C, H, N), FTIR, NMR (¹H, ³¹P), ESI-MS and UV-visible spectroscopy. The molecular structure of (1) and (2) complexes was confirmed by single-crystal X-ray crystallography. It showed a distorted square planar geometry for both complexes around the metal center, and the H₂L adopt a bi-negative tridentate chelating mode. The interaction with biomolecules viz., calf thymus DNA (ct DNA), yeast RNA (tRNA), and BSA (bovine serum albumin) was examined by both UV-visible and fluorescence spectroscopies. The antioxidant activity of all compounds is discussed on basis of DPPH^• (2,2-diphenyl-1-picrylhydrazyl) scavenging activity and showed better antioxidant activity for complexes compared to the ligand. The in vitro cytotoxicity of the compounds was tested on human (breast cancer (MCF7), colon cancer (HCT116), liver cancer (HepG2), and normal lung fibroblast (WI38)) cell lines, showing that complex (1) the most potent against MCF7 and complex (4) against HCT116 cell lines based on IC₅₀ and selective indices (SI) values. So, both complexes were chosen for further studies such as DNA fragmentation, cell apoptosis, and cell cycle analyses. Complex (1) induced MCF7 cell death by cellular apoptosis and arrest cells at S phase. Complex (4) induced HCT116 cell death predominantly by cellular necrosis and arrested cell division at G2/M phase due to DNA damage.

DFT studies on vibrational and electronic spectra, HOMO-LUMO, MEP, HOMA, NBO and molecular docking analysis of benzyl-3-N-(2,4,5-trimethoxyphenylmethylene)hydrazinecarbodithioate

Benzyl-3-N-(2,4,5-trimethoxyphenylmethylene)hydrazinecarbodithioate (compound 1) is a bidentate and nitrogen-sulfur containing Schiff base, which has been synthesized by the condensation reaction of S-benzylndithiocarbazate and 2,4,5-trimethoxybenzaldehyde. The theoretical calculations of the mentioned compound have been carried out using the more popular density functional theory method, Becke-3-Parameter-Lee-Yang-Parr (B3LYP) in 6-31G+(d,p) basis set. The computational results of the compound were compared with the obtained experimental value. Moreover, the highest occupied molecular orbital, the lowest unoccupied molecular orbital, molecular electrostatic potential, chemical reactivity parameters and natural bond orbital of the optimized structure have been evaluated at the same level of theory. Furthermore, the UV–Vis spectrum of the compound has been carried out for the better understanding of electronic absorption spectra with the help of the time-dependent density functional theory at room temperature. Besides, the molecular docking simulation of the mentioned molecule with target protein was also investigated. In addition, in silico studies were performed to predict absorption, distribution, metabolism, excretion and toxicity profiles of the designed compound. The results indicated that the theoretical data have well correlated with the observed values. The narrow frontier orbital gap indicated that the eventual charge transfer interaction occurs within the studied molecule and showed high chemical reactivity. The global reactivity values showed that the compound is soft molecule, electrophilic species and has strong binding ability with biomolecules. The molecular electrostatic potential structure indicated that the negative and positive potential sites are around electronegative atoms and hydrogen atoms of studied compound, respectively. The natural bond orbital data revealed that the compound contains 97.42% Lewis and 2.58% non-Lewis structure. The intra and inter-molecular charge transfers process occur within the studied compound. The studied compound showed more binding energy (−6.0 kcal/mol) with target protein than hydroxychloroquine (−5.6 kcal/mol). The absorption, distribution, metabolism, excretion and toxicity investigation predicted that the compound has good drug like character.

(E)-{[(Butyl-sulfan-yl)methane-thio-yl]amino}(4-meth-oxy-benzyl-idene)amine: crystal structure and Hirshfeld surface analysis

The title hydrazine carbodi-thio-ate, C13H18N2OS2, is constructed about a central and almost planar C2N2S2 chromophore (r.m.s. deviation = 0.0263 Å); the terminal meth-oxy-benzene group is close to coplanar with this plane [dihedral angle = 3.92 (11)°]. The n-butyl group has an extended all-trans conformation [torsion angles S-Cm-Cm-Cm = -173.2 (3)° and Cm-Cm-Cm-Cme = 180.0 (4)°; m = methyl-ene and me = meth-yl]. The most prominent feature of the mol-ecular packing is the formation of centrosymmetric eight-membered {⋯HNCS}2 synthons, as a result of thio-amide-N-H⋯S(thio-amide) hydrogen bonds; these are linked via meth-oxy-C-H⋯π(meth-oxy-benzene) inter-actions to form a linear supra-molecular chain propagating along the a-axis direction. An analysis of the calculated Hirshfeld surfaces and two-dimensional fingerprint plots point to the significance of H⋯H (58.4%), S⋯H/H⋯S (17.1%), C⋯H/H⋯C (8.2%) and O⋯H/H⋯O (4.9%) contacts in the packing. The energies of the most significant inter-actions, i.e. the N-H⋯S and C-H⋯π inter-actions have their most significant contributions from electrostatic and dispersive components, respectively. The energies of two other identified close contacts at close to van der Waals distances, i.e. a thione-sulfur and meth-oxy-benzene-hydrogen contact (occurring within the chains along the a axis) and between methyl-ene-H atoms (occurring between chains to consolidate the three-dimensional architecture), are largely dispersive in nature.