Three-dimensional supramolecular crystalline materials based on Keggin-based polyoxometalates and 1,2-Bis (4-pyridyl) ethylene for supercapacitor electrodes

Improved capacitive performances and electrocatalytic reduction activity by regulating the bonding interaction between Zn-bistriazole-pyrazine/pyridine units and diverse Anderson-type polyoxometalates

Electrochemical performances can be effectively improved by introducing metal-organic units (MOUs) into polyoxometalates (POMs). However, regulating the bonding strength between POMs and MOUs at the molecular level to improve the electrochemical performance is a challenging task. Three new POM-based metal-organic complexes (MOCs), namely H{Zn2(Hpytty)2(H2O)8[CrMo6(OH)6O18]}·2H2O (1), H{Zn2(Hpyttz)2(H2O)6[CrMo6(OH)6O18]}·8H2O (2), and {(μ2-OH)2Zn6(pyttz)2(H2O)10[TeMo6O24]}·2H2O (3) (H2pytty = 3-(pyrazin-2-yl)-5-(1H-1,2,4-triazol-3-yl)-1,2,4-triazolyl, H2pyttz = 3-(pyrid-2-yl)-5-(1H-1,2,4-triazol-3-yl)-1,2,4-triazolyl), were obtained. Single-crystal X-ray diffraction shows that the bonding strength (from the hydrogen bond to the coordination bond) between Zn-bistriazole-pyrazine/pyridine units and diverse Anderson-type POMs gradually increases from complexes 1 to 3. Glassy carbon electrodes modified with complex 3 (3-GCE) has the highest specific capacitance, which is 930 F g-1 at 1 A g-1. Moreover, carbon paste electrodes (1-3-CPEs) modified with complexes 1-3 are used as electrochemical sensors for detecting Cr(VI) ions, with limits of detection well below the World Health Organization (WHO) maximum level in drinking water.

Vanadium-Substituted Dawson-Type Polyoxometalate–TiO2 Nanowire Composite Film as Advanced Cathode Material for Bifunctional Electrochromic Energy-Storage Devices

Polyoxometalates (POMs) demonstrate potential for application in the development of integrated smart energy devices based on bifunctional electrochromic (EC) optical modulation and electrochemical energy storage. Herein, a nanocomposite thin film composed of a vanadium-substituted Dawson-type POM, i.e., K₇[P₂W₁₇VO₆₂]·18H₂O, and TiO₂ nanowires were constructed via the combination of hydrothermal and layer-by-layer self-assembly methods. Through scanning electron microscopy and energy-dispersive spectroscopy characterisations, it was found that the TiO₂ nanowire substrate acts as a skeleton to adsorb POM nanoparticles, thereby avoiding the aggregation or stacking of POM particles. The unique three-dimensional core−shell structures of these nanocomposites with high specific surface areas increases the number of active sites during the reaction process and shortens the ion diffusion pathway, thereby improving the electrochemical activities and electrical conductivities. Compared with pure POM thin films, the composite films showed improved EC properties with a significant optical contrast (38.32% at 580 nm), a short response time (1.65 and 1.64 s for colouring and bleaching, respectively), an excellent colouration efficiency (116.5 cm² C⁻¹), and satisfactory energy-storage properties (volumetric capacitance = 297.1 F cm⁻³ at 0.2 mA cm⁻²). Finally, a solid-state electrochromic energy-storage (EES) device was fabricated using the composite film as the cathode. After charging, the constructed device was able to light up a single light-emitting diode for 20 s. These results highlight the promising features of POM-based EES devices and demonstrate their potential for use in a wide range of applications, such as smart windows, military camouflage, sensors, and intelligent systems.

POMCPs with Novel Two Water-Assisted Proton Channels Accommodated by MXenes for Asymmetric Supercapacitors

To develop high-performance supercapacitors, the negative electrode is at present viewed as one of the most challenging tasks for obtaining the next-generation of energy storage devices. Therefore, in this study, a polyoxometalate-based coordination polymer [Zn(itmb)₃ H₂ O][H₂ SiW₁₂ O₄₀ ]·5H₂ O (1) is designed and prepared by a simple hydrothermal method for constructing a high-capacity negative electrode. Polymer 1 has two water-assisted proton channels, which are conducive to enhancing the electrical conductivity and storage capacity. Then, MXene Ti₃ C₂ T_x is chosen to accommodate coordination polymer 1 as the interlayer spacers to improve the conductivity and cycling stability of 1, while preventing the restacking of MXene. Expectedly, the produced composite electrode 1@Ti₃ C₂ T_x shows an excellent specific capacitance (1480.1 F g^-1 at 5 A g^-1 ) and high rate performance (a capacity retention of 71.5% from 5 to 20 A g^-1 ). Consequently, an asymmetric supercapacitor device is fabricated using 1@Ti₃ C₂ T_x as the negative electrode and celtuce leaves-derived carbon paper as the positive electrode, which demonstrates ultrahigh energy density of 32.2 Wh kg^-1 , and power density 2397.5 W kg^-1 , respectively. In addition, the ability to illuminate a red light-emitting diode for several minutes validates its feasibility for practical application.

Surfactant-assisted fabrication and supercapacitor performances of a 12-phosphomolybdate-pillared metal–organic framework containing a helix and its SWNT nanocomposites

By employing a surfactant-assisted hydrothermal method, a new POMOF with a multi-fold helix was obtained, and NiPMo12/SWNTs exhibits excellent electrochemical performance and good stability as an electrode material for supercapacitors.

{BW12O40} Hybrids Modified by in Situ Synthesized Rigid Ligand with Supercapacitance and Photocatalytic Properties

Organic rigid ligand-modified polyoxometalate-based materials possess complex and diverse structures, promising electrochemical energy storage properties and outstanding photocatalytic capabilities. Hence, two new [BW₁₂O₄₀]^5-(abbreviated as {BW₁₂O₄₀})-based inorganic-organic hybrids [{Cu(en)₂(H₂O)}][{Cu(pdc)(en)}{Cu(en)₂}(BW₁₂O₄₀)]·2H₂O (1) and [{Cu^I₅(pz)₆(H₂O)₄}(BW₁₂O₄₀)] (2) (pdc = 2-picolinate, en = ethylenediamine, pz = pyrazine) were successfully synthesized through a hydrothermal method. Among them, pdc and pz were obtained by in situ transformation from 2,6-pyridinedicarboxylic acid (H₂ pydc) and 2,3-pyrazinedicarboxylic acid (H₂pzdc), respectively. In compound 1, the {BW₁₂O₄₀} clusters as an intermediate junction connect with {Cu(pdc)(en)}{Cu(en)₂} and {Cu(en)₂(H₂O)} to form monomers, which in turn form supramolecular chains, sheets, and space network via hydrogen bonding. The {BW₁₂O₄₀} clusters are packed into copper-pyrazine frameworks in compound 2, and a unique polyoxometalate-based metal organic frameworks (POMOFs) structure with a new topology of {12}₂{6.12³.14²}₂{6².12.14².18}{6².12³.16}{6}₆ is formed via covalent bonds. When used as electrode materials for supercapacitors, the values of specific capacitance are 651.56 F g^-1 for 1-GCE and 584.43 F g^-1 for 2-GCE at a current density of 2.16 A g^-1 and good cycling stability (90.94%, 94.81% of the initial capacity after 5000 cycles at 15.12 A g^-1, respectively). The kinetic analysis reveals that surface capacitance plays a major role. Furthermore, both compounds can effectively degrade Rhodamine B (RhB) and Methylene blue (MB), showing the outstanding photocatalytic performance.