Vanadium oxide surfaces and supported vanadium oxide nanoparticles

Controlled Delivery and Photopatterning of Mechanical Properties in Polysaccharide Hydrogels Using Vanadium Coordination and Photochemistry

Incorporation of the transition metal ion V(V) into hydrogels has been used to impart photoresponsive behavior, which was used to tune materials properties during light irradiation. The photoreaction in QHE-cellulose/agarose hydrogels coordinated with vanadium was evidenced by a clear color change of yellow to blue through a green intermediate. This color change was attributed to the reduction of V(V) to V(IV) as described in our previous work. A concomitant oxidative breakdown of the polysaccharide chain was noticeable upon the reduction of V(V) with a decrease in stiffness (G') of the hydrogel material. This reduction of the metal ion and breakdown of polysaccharide chain induced irreversible changes in the microstructure of the hydrogel, enabling the controlled delivery of V(IV) and/or encapsulated cargo. Scanning electron microscopy studies showed an increase in pore sizes and guest cavity formation during irradiation. In addition to the significant drop in mechanical properties like storage and loss modulus in the gel materials, a viscosity drop in the polymer solution was observed through irradiation, indicating breakdown of the polysaccharide chain. A photomask can be used to create discrete patterns on these materials upon irradiation.

Feasible Structure Manipulation of Vanadium Selenide into VSe2 on Au(111)

Vanadium diselenide (VSe2), a member of the transition metal dichalcogenides (TMDs), is proposed with intriguing properties. However, a comprehensive investigation of VSe2 (especially regarding on the growth mechanism) is still lacking. Herein, with the molecular beam epitaxy (MBE) measures frequently utilized in surface science, we have successfully synthesized the single-layer VSe2 on Au(111) and revealed its structural transformation using a combination of scanning tunneling microscopy (STM) and density functional theory (DFT). Initially, formation of the honeycomb structure is observed with the moiré periodicity, which is assigned to VSe2. Followed by stepwise annealing, defective structures with streaked patterns start to emerge due to the depletion of Se, which can be reversed to the pristine VSe2 by resupplying Se. With more V than Se deposited, a new compound that has no bulk analogue is discovered on Au(111), which could be transformed back to VSe2 after providing excessive Se. As the realization of manipulating V selenide phases is subtly determined by the relative ratio of V to Se and post-annealing treatments, this report provides useful insights toward fundamental understanding of the growth mechanism of TMDs and might promote the wide application of VSe2 in related fields such as catalysis and nanoelectronics.

Electrodeposition of CoxNiVyOz Ternary Nanopetals on Bare and rGO-Coated Nickel Foam for High-Performance Supercapacitor Application

We report a simple strategy to grow a novel cobalt nickel vanadium oxide (CoxNiVyOz) nanocomposite on bare and reduced-graphene-oxide (rGO)-coated nickel foam (Ni foam) substrates. In this way, the synthesized graphene oxide is coated on Ni foam, and reduced electrochemically with a negative voltage to prepare a more conductive rGO-coated Ni foam substrate. The fabricated electrodes were characterized with a field-emission scanning electron microscope (FESEM), energy-dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), and Fourier-transform infrared (FTIR) spectra. The electrochemical performance of these CoxNiVyOz-based electrode materials deposited on rGO-coated Ni foam substrate exhibited superior specific capacitance 701.08 F/g, which is more than twice that of a sample coated on bare Ni foam (300.31 F/g) under the same experimental conditions at current density 2 A/g. Our work highlights the effect of covering the Ni foam surface with a rGO film to expedite the specific capacity of the supercapacitors. Despite the slightly decreased stability of a CoxNiVyOz-based electrode coated on a Ni foam@rGO substrate, the facile synthesis, large specific capacitance, and preservation of 92% of the initial capacitance, even after running 5500 cyclic voltammetric (CV) scans, indicate that the CoxNiVyOz-based electrode is a promising candidate for high-performance energy-storage devices.

Application of Scanning Tunneling Microscopy in Electrocatalysis and Electrochemistry

Abstract

Scanning tunneling microscopy (STM) has gained increasing attention in the field of electrocatalysis due to its ability to reveal electrocatalyst surface structures down to the atomic level in either ultra-high-vacuum (UHV) or harsh electrochemical conditions. The detailed knowledge of surface structures, surface electronic structures, surface active sites as well as the interaction between surface adsorbates and electrocatalysts is highly beneficial in the study of electrocatalytic mechanisms and for the rational design of electrocatalysts. Based on this, this review will discuss the application of STM in the characterization of electrocatalyst surfaces and the investigation of electrochemical interfaces between electrocatalyst surfaces and reactants. Based on different operating conditions, UHV-STM and STM in electrochemical environments (EC-STM) are discussed separately. This review will also present emerging techniques including high-speed EC-STM, scanning noise microscopy and tip-enhanced Raman spectroscopy.

Graphic Abstract

Temperature effects on VO2 thin films deposited by RF sputtering for the degradation by photocatalysis of methylene blue and naproxen

The temperature effect on VO2 thin films synthesized by RF sputtering on their morphological, optical, electrical properties and their activity in the photocatalytic degradation of methylene blue and naproxen was studied. Characterization results presented microcrystallinity for VO2 films treated at 50 and 100 °C. Nevertheless, the untreated films and films treated at 200 °C revealed characteristic peaks of monoclinic and tetragonal phases. SEM micrographs with elemental mapping of VO2 films showed granular morphology and a good oxygen dispersion along the film surface, possibly due to a restructuring on the film occasioned by particle coalescence and vanadium oxide island conformation. The electronic transmittance spectra showed the d–d transition characteristic for the square-pyramidal stereochemistry of vanadium (IV) ion, where the optical band interval was high for films treated at 50 °C. Raman spectroscopy results presented an increment in the V = O/V–O ratio as a function of temperature, probably related to superficial vanadium species formation. X-ray spectroscopy results showed the Onon-lattice/Olattice ratio values higher for films treated at 50 °C than the other films, related to an oxide character. The V 2p fit results presented V4+, V5+ regions and satellites for VO2 films thermal treated at 50 °C. The electrical resistivity on the VO2 films decreased as a function of temperature. Finally, the VO2 films thermal treated at 50 °C had higher photocatalytic activity in the degradation of methylene blue and naproxen compared to the other VO2 films, possibly associated with high electron mobility between the surface and the bulk, where the oxygen vacancies act as recombination sites for the e−/h+ pairs during photocatalytic degradation.

Synthesis of nanosized vanadium(v) oxide clusters below 10 nm

Vanadium oxide clusters with a mean diameter below 10 nm are investigated by high resolution Scanning Transmission Electron Microscopy (STEM), Electron Energy Loss Spectroscopy (EELS) and UV-vis absorption spectroscopy. The clusters are synthesised by sublimation from bulk vanadium(v) oxide, in combination with a pick-up by superfluid helium droplets. The latter act as reaction chambers which enable cluster growth under fully inert and solvent-free conditions. High-resolution STEM images of deposited vanadium oxide particles allowing for the determination of lattice constants, clearly indicate a dominating presence of V₂O₅. This finding is further supported by UV-vis absorption spectra of nanoparticles after deposition on fused silica substrates, which indicates that the oxidation state of the material is preserved over the entire process. From the results of the UV-vis measurement, the band gap of the nanosized V₂O₅ could be determined to be 3.3 eV. The synthesis approach provides a route to clean V₂O₅ clusters as it does not involve any surfactant or solvents, which is crucial for an unbiased measurement of intrinsic catalyst properties.

Vanadium(V) oxide clusters synthesized by sublimation from bulk under fully inert conditions

While laser ablation in combination with electron impact mass spectroscopy yield numerous fragments and reaction products, helium-mediated mass analysis reveals the sublimation from bulk in units of (V₂O₅)₂.

Oxide nanoparticles in the size range of a few nanometers are typically synthesized in solution or via laser ablation techniques, which open numerous channels for structural change via chemical reactions or fragmentation processes. In this work, neutral vanadium oxide nanoparticles are instead synthesized by sublimation from bulk in combination with a pickup by superfluid helium droplets. Mass spectroscopy measurements clearly demonstrate the preservation of the bulk stoichiometric ratio of vanadium to oxygen in He-grown nanoparticles, indicating a tendency towards tetrahedral coordination of the vanadium centers in finite geometries. This unexpected finding opens up new possibilities for a combined on-the-fly synthesis of nanoparticles consisting of metal and metal-oxide layers. In comparison to mass spectra obtained via direct ionization of vanadium oxide in an effusive beam, where strong fragmentation occurred, we observe a clear preference for (V₂O₅)_n oligomers with even n inside the He nanodroplets, which is further investigated and explained using the electronic structure theory.

Reducing the V2O3(0001) surface through electron bombardment--a quantitative structure determination with I/V-LEED

The (0001) surface of vanadium sesquioxide, V2O3, is terminated by vanadyl groups under standard ultra high vacuum preparation conditions. Reduction with electrons results in a chemically highly active surface with a well-defined LEED pattern indicating a high degree of order. In this work we report the first quantitative structure determination of a reduced V2O3(0001) surface. We identify two distinct surface phases by STM, one well ordered and one less well ordered. I/V-LEED shows the ordered phase to be terminated by a single vanadium atom per surface unit cell on a quasi-hexagonal oxygen layer with three atoms per two-dimensional unit cell. Furthermore we compare the method of surface reduction via electron bombardment with the deposition of V onto a vanadyl terminated film. The latter procedure was previously proposed to result in a structure with three surface vanadium atoms in the 2D unit cell and we confirm this with simulated STM images.

Island Ripening via a Polymerization-Depolymerization Mechanism

In catalytic methanol oxidation on ultrathin vanadium oxide layers on Rh(111) (Θ_{V}≈0.2 monolayer equivalent) we observe a 2D ripening of the VO_{x} islands that is controlled by the catalytic reaction. Neighboring VO_{x} islands move under reaction conditions towards each other and coalesce. The motion and the coalescence of the islands are explained by a polymerization-depolymerization equilibrium that is sensitive to gradients in the adsorbate coverages.

Mononuclear metavanadate catalyses gas phase oxidation of methanol to formaldehyde employing dioxygen as the terminal oxidant

Multistage mass spectrometry experiments reveal a sequence of gas phase reactions for the oxidation of methanol to formaldehyde with a mononuclear oxo vanadate anion as the catalyst and dioxygen as the terminal oxidant.