Variable Temperature IR Spectroscopy in the Studies of Oxide Catalysts

Active Sites in H-Mordenite Catalysts Probed by NMR and FTIR

Mordenites are widely used in catalysis and environmental protection. The catalytic properties of mordenite are largely determined by the composition of its crystal framework, i.e., the SiO2/Al2O3 molar ratio (MR), and the cationic form. In H-mordenites, the most important characteristic becomes the structure and distribution of acid sites, which depends on the number and distribution of Al tetrahedra in the framework. In the present work, the local structure of these centers in H-mordenite catalysts with a nominal MR varied from 9.9 to 19.8 was studied in detail using a combination of magic angle spinning nuclear magnetic resonance (MAS NMR) and Fourier transform infrared spectroscopy (FTIR). 27Al MAS NMR indicates the presence of extra-framework Al in most of the studied samples that results in a higher real MR of the zeolitic framework compared to the nominal value. Concentrations of Lewis and Brønsted acid sites, as well as of silanol groups were estimated by elemental analysis, NMR, and FTIR spectroscopy. The values of site concentrations obtained from band intensities of adsorbed CO and those of OH groups are compared with the amount of framework and extra-framework aluminum. The advantages and restrictions of different methods of active site characterization are discussed.

Operando Fourier-transform infrared-mass spectrometry reactor cell setup for heterogeneous catalysis with glovebox transfer process to surface-chemical characterization

We describe a new type of operando Fourier transform infrared (FTIR)-mass spectrometry setup for surface-chemical and reactivity characterization of heterogeneous catalysts. On the basis of a sophisticated all-quartz FTIR reactor cell, capable of operating between room temperature and 1000 °C in reactive gas atmospheres, the setup offers a unique opportunity to simultaneously collect and accordingly correlate FTIR surface-chemical adsorption data of the active catalyst state and FTIR gas phase data with complementary reactivity data obtained via mass spectrometry in situ. The full set of catalytic operation modes (recirculating static and flow reactor conditions) is accessible and can be complemented with a variety of temperature-programmed reaction modes or thermal desorption. Due to the unique transfer process involving a home-built portable glovebox to avoid air exposure, a variety of complementary quasi in situ characterization methods for the pre- and post-reaction catalyst states become accessible. We exemplify the capabilities for additional x-ray photoelectron spectroscopy characterization of surface-chemical states, highlighting the unique strength of combining adsorption, electronic structure, and reactivity data to gain detailed insight into the reactive state of a Cu/ZrO₂ heterogeneous catalyst during methanol steam reforming operation.

Spectral studies of niflumic acid aggregation in dissolved, solid and adsorbed states

FTIR spectra of niflumic acid in solid state, dissolved in CCl₄ and adsorbed on silica or alumina surface, as well as their temperature dependence, provide information about different stages of aggregation: monomers, dimers, amorphous and crystalline solid phase, as well as about perturbation of the molecule by the surface. The spectra observed are compared with those obtained by quantum mechanical calculations. The luminescence spectra are less sensitive to the aggregation, they differ mostly in the intensity, while the position of maximum at about 440 nm remains almost the same.

A transmission infrared cell design for temperature-controlled adsorption and reactivity studies on heterogeneous catalysts

A design is presented for a versatile transmission infrared cell that can interface with an external vacuum manifold to undergo in situ gas treatments and receive controlled doses of various adsorbates and probe molecules, allowing characterization of heterogeneous catalyst surfaces in order to identify and quantify active sites and adsorbed surface species. Critical design characteristics include customized temperature control for operation between cryogenic and elevated temperatures (100-1000 K) and modified Cajon fittings for operation over a wide pressure range (10^-2-10³ Torr) that eliminates the complications introduced when using sealants or flanges to secure cell windows. The customized, hand-tightened Cajon fittings simplify operation of the cell compared to previously reported designs, because they allow for rapid cell assembly and disassembly and, in turn, replacement of catalyst samples. In order to validate the performance of the cell, transmission infrared spectroscopic experiments are reported to characterize the Brønsted and Lewis acid sites present in H-beta and H-mordenite zeolites using cryogenic adsorption of CO (<150 K).

Probing zeolites by vibrational spectroscopies

This review addresses the most relevant aspects of vibrational spectroscopies (IR, Raman and INS) applied to zeolites and zeotype materials. Surface Brønsted and Lewis acidity and surface basicity are treated in detail. The role of probe molecules and the relevance of tuning both the proton affinity and the steric hindrance of the probe to fully understand and map the complex site population present inside microporous materials are critically discussed. A detailed description of the methods needed to precisely determine the IR absorption coefficients is given, making IR a quantitative technique. The thermodynamic parameters of the adsorption process that can be extracted from a variable-temperature IR study are described. Finally, cutting-edge space- and time-resolved experiments are reviewed. All aspects are discussed by reporting relevant examples. When available, the theoretical literature related to the reviewed experimental results is reported to support the interpretation of the vibrational spectra on an atomic level.

New advances in the use of infrared absorption spectroscopy for the characterization of heterogeneous catalytic reactions

Infrared absorption spectroscopy has proven to be one of the most powerful spectroscopic techniques available for the characterization of catalytic systems. Although the history of IR absorption spectroscopy in catalysis is long, the technique continues to provide key fundamental information about a variety of catalysts and catalytic reactions, and to also offer novel options for the acquisition of new information on both reaction mechanisms and the nature of the solids used as catalysts. In this review, an overview is provided of the main contributions that have been derived from IR absorption spectroscopy studies of catalytic systems, and a discussion is included on new trends and new potential directions of research involving IR in catalysis. We start by briefly describing the power of Fourier-transform IR (FTIR) instruments and the main experimental IR setups available, namely, transmission (TIR), diffuse reflectance (DRIFTS), attenuated total reflection (ATR-IR), and reflection-absorption (RAIRS), for advancing research in catalysis. We then discuss the different environments under which IR characterization of catalysts is carried out, including in situ and operando studies of typical catalytic processes in gas-phase, research with model catalysts in ultrahigh vacuum (UHV) and so-called high-pressure cell instruments, and work involving liquid/solid interfaces. A presentation of the type of information extracted from IR data follows in terms of the identification of adsorbed intermediates, the characterization of the surfaces of the catalysts themselves, the quantitation of IR intensities to extract surface coverages, and the use of probe molecules to identify and titrate specific catalytic sites. Finally, the different options for carrying out kinetic studies with temporal resolution such as rapid-scan FTIR, step-scan FTIR, and the use of tunable lasers or synchrotron sources, and to obtain spatially resolved spectra, by sample rastering or by 2D imaging, are introduced.