Propane Oxidation Over Pd/Al2O3: Kinetic and In Situ XPS Study

Advances in morphology-controlled alumina and its supported Pd catalysts: synthesis and applications

Alumina materials, as one of the cornerstones of the modern chemical industry, possess physical and chemical properties that include excellent mechanical strength and structure stability, which also make them highly suitable as catalyst supports. Alumina-supported Pd-based catalysts with the advantages of exceptional catalytic performance, flexible regulated surface metal/acid sites, and good regeneration ability have been widely used in many traditional chemical industry fields and have also shown great application prospects in emerging fields. This review aims to provide an overview of the recent advances in alumina and its supported Pd-based catalysts. Specifically, the synthesis strategies, morphology transformation mechanisms, and structural properties of alumina with various morphologies are comprehensively summarized and discussed in-depth. Then, the preparation approaches of Pd/Al2O3 catalysts (impregnation, precipitation, and other emerging methods), as well as the metal-support interactions (MSIs), are revisited. Moreover, Some promising applications have been chosen as representative reactions in fine chemicals, environmental purification, and sustainable development fields to highlight the universal functionality of the alumina-supported Pd-based catalysts. The role of the Pd species, alumina support, promoters, and metal-support interactions in the enhancement of catalytic performance are also discussed. Finally, some challenges and upcoming opportunities in the academic and industrial application of the alumina and its supported Pd-based are presented and put forward.

Abatement of photochemical smog precursors through complete hydrocarbon oxidation over commercial Pd catalysts under fuel-lean conditions with NO promoting effect

Currently, severe environmental issues have led to a great transition in the automotive industry from internal combustion engine vehicles to electric vehicles, but this transition will take time more than 10 years, which still requires the use of internal combustion engine vehicles. However, these vehicles emit a significant amount of hydrocarbons, in addition to nitrogen oxides (NOx), due to incomplete fuel combustion. They contribute to the formation of photochemical smog when they react with NOx in the presence of sunlight. To effectively remove these hydrocarbons from the exhaust gas of turbo-gasoline engines or diesel engines, we investigated the abatement of propane and iso-pentane, two typical hydrocarbons. In particular, we studied commercial Pd catalysts and revealed how the Pd loading and aging process simulating 4k and 100k mileage affected hydrocarbon abatement abilities, and their phases were identified using characterization technique, including CO chemisorption, X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HR-TEM). We also suggested the reaction pathway for the complete oxidation of propane over Pd catalyst based on the reaction orders of propane and oxygen: Propane adsorbs on O atoms of PdO, and the kinetically relevant C-H bond cleavage step occurs by the interaction with abundant neighboring O atoms of PdO. Finally, the propane and iso-pentane abatement ability of the Pd catalyst aged for 100k mileage were evaluated under realistic exhaust gas conditions, and the effect of each gas component in the realistic exhaust gas was identified; water inhibits the catalytic reaction of hydrocarbons by occupying the active sites, whereas NO catalyzes the hydrocarbon oxidation reaction by either changing the reaction pathway or active sites under fuel-lean conditions. These findings enable us to effectively reduce environmental pollution and facilitate a smoother transition from internal combustion engine vehicles to electric vehicles.

Variation in Metal-Support Interaction with TiO2 Loading and Synthesis Conditions for Pt-Ti/SBA-15 Active Catalysts in Methane Combustion

The control of catalytic performance using synthesis conditions is one of the main goals of catalytic research. Two series of Pt-Ti/SBA-15 catalysts with different TiO₂ percentages (n = 1, 5, 10, 30 wt.%) were obtained from tetrabutylorthotitanate (TBOT) and peroxotitanate (PT), as titania precursors and Pt impregnation. The obtained catalysts were characterized using X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), N₂ sorption, Raman, X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), hydrogen temperature-programmed reduction (H₂-TPR) and H₂-chemisorption measurements. Raman spectroscopy showed framework titanium species in low TiO₂ loading samples. The anatase phase was evidenced for samples with higher titania loading, obtained from TBOT, and a mixture of rutile and anatase for those synthesized by PT. The rutile phase prevails in rich TiO₂ catalysts obtained from PT. Variable concentrations of Pt⁰ as a result of the stronger interaction of PtO with anatase and the weaker interaction with rutile were depicted using XPS. TiO₂ loading and precursors influenced the concentration of Pt species, while the effect on Pt nanoparticles' size and uniform distribution on support was insignificant. The Pt/PtO ratio and their concentration on the surface were the result of strong metal-support interaction, and this influenced catalytic performance in the complete oxidation of methane at a low temperature. The highest conversion was obtained for sample prepared from PT with 30% TiO₂.

Highly selective electrocatalytic reduction of nitrate to nitrogen in a chloride ion-free system by promoting kinetic mass transfer of intermediate products in a novel Pd-Cu adsorption confined cathode

The mass transfer on the catalyst surface has a great influence on the selectivity of electrocatalytic nitrate reduction to nitrogen. In this study, a Pd-Cu adsorption confined nickel foam cathode is designed in the absence of both proton exchange membranes and chloride ions. The repulsion of the cathode enables intermediate products such as nitrite to accumulate in the confined region, resulting in an increase in the possibility of a second-order reaction to form nitrogen. The system can obtain more than 92% continuous N₂ selectivity when it is used to treat 200 mg L^-1 NO₃^--N under a current density of 8 mA cm^-2, which is not only higher than those of semiconfined and nonconfined systems but also significantly better than the results obtained by Pd-Cu directly modified cathodes prepared by electrodeposition or impregnation. It is found that a high initial nitrate concentration and low current density are more beneficial for the accumulation of intermediates on Pd-Cu catalysts, thus improving the formation of nitrogen. A mechanism study reveals that the intermediates can completely occupy the active sites on the surface of Pd, avoiding the generation of active hydrogen, and therefore inhibiting the first-order reaction to produce ammonia. Moreover, the reducibility of Pd-Cu can also be gradually improved under the function of the cathode so that the system exhibits good stability. This study demonstrates an environmentally friendly and promising method for total nitrogen removal from industrial wastewater with high conductivity.

Present and new frontiers in materials research by ambient pressure x-ray photoelectron spectroscopy

In this topical review we catagorise all ambient pressure x-ray photoelectron spectroscopy publications that have appeared between the 1970s and the end of 2018 according to their scientific field. We find that catalysis, surface science and materials science are predominant, while, for example, electrocatalysis and thin film growth are emerging. All catalysis publications that we could identify are cited, and selected case stories with increasing complexity in terms of surface structure or chemical reaction are discussed. For thin film growth we discuss recent examples from chemical vapour deposition and atomic layer deposition. Finally, we also discuss current frontiers of ambient pressure x-ray photoelectron spectroscopy research, indicating some directions of future development of the field.

Correlation of the ratio of metallic to oxide species with activity of PdPt catalysts for methane oxidation

Activity of catalysts increase linearly with increasing ratio of Pd/Pt bimetallic to oxide species as observed in XRD.

An in situ XAS study of the activation of precursor-dependent Pd nanoparticles

The activation of precursor-dependent Pd nanoparticles was comprehensively followed by in situ X-ray absorption spectroscopy on two inorganic supports for rationalizing the final catalytic activity.