Bacterial Degraders of Coexisting Dichloromethane, Benzene, and Toluene, Identified by Stable-Isotope Probing

Microbial diversity and metabolic inference of diclofenac removal in optimised batch heterotrophic-denitrifying conditions by means of factorial design

Using the Response Surface Methodology (RSM) and Rotational Central Composite Design (RCCD), this study evaluated the removal of DCF under denitrifying conditions, with ethanol as cosubstrate, in batch reactors, being 1 L Erlenmeyer flasks (330 mL of reactional volume) containing Dofing medium and kept under agitation at 130 rpm and incubated at mesophilic temperature (30 °C). It considered the individual and multiple effects of the variables: nitrate (130 - 230 mg NO3- L-1), DCF (60-100 µg DCF L-1) and ethanol (130 - 230 mg EtOH L-1). The highest drug removal efficiency (17.5%) and total nitrate removal were obtained at 176.6 ± 4.3 mg NO3 -L-1, 76.8 ± 3.7 µg DCF L-1, and 180.0 ± 2.5 mg EtOH L-1. Under such conditions, the addition of ethanol and nitrate was significant for the additional removal of diclofenac (p > 0.05). The prevalence of Rhodanobacter, Haliangium and Terrimonas in the inoculum biomass (activated sludge systems) was identified through the 16S rRNA gene sequencing. The potential of these genera to remove nitrate and degrade diclofenac was inferred, and the main enzymes potentially involved in this process were α-methylacyl-CoA racemase, long-chain fatty acid-CoA ligase, catalases and pseudoperoxidases.

Indoor air VOCs biofiltration by bioactive coating packed bed bioreactors

Bioactive coatings are envisaged as a promising biotechnology to tackle the emerging problem of indoor air pollution. This solution could cope with the low concentrations, the wide range of compounds and the hydrophobicity of some indoor air VOCs, which are the most important bottlenecks regarding the implementation of conventional biotechnologies for indoor air treatment. A bioactive coating-based bioreactor was tested in this study for the abatement of different VOCs (n-hexane, toluene and α-pinene) at different empty bed residence times (EBRT) and inlet VOC concentrations. The performance of this reactor was compared with a conventional biofilm-based bioreactor operated with the same microbial inoculum. After an acclimation period, the bioactive coating-based bioreactor achieved abatements of over 50% for hexane, 80% for toluene and 70% for pinene at EBRTs of 112-56 s and inlet concentrations of 9-15 mg m-3. These results were about 25, 10 and 20% lower than the highest removals recorded in the biofilm-based bioreactor. Both bioreactors experienced a decrease in VOC abatement by ∼25% for hexane, 45% for toluene and 40% for pinene, after reducing the EBRT to 28 s. When inlet VOC concentrations were progressively reduced, VOC abatement efficiencies did not improve. This fact suggested that low EBRTs and low inlet VOCs concentration hindered indoor air pollutant abatement as a result of a limited mass transfer and bioavailability. Metagenomic analyses showed that process operation with toluene, hexane and pinene as the only carbon and energy sources favored an enriched bacterial community represented by the genera Devosia, Mesorhizobium, Sphingobacterium and Mycobacterium, regardless of the bioreactor configuration. Bioactive coatings were used in this work as packing material of a conventional bioreactor, achieving satisfactory VOC abatement similar to a conventional bioreactor.

Effect of weak electrical stimulation on m-dichlorobenzene biodegradation in biotrickling filters: Insights from performance and microbial community analysis

The microbial electrolysis cell coupled with the biotrickling filters (MEC-BTF) was developed for enhancing the biodegradation of gaseous m-dichlorobenzene (m-DCB) through weak electrical stimulation. The maximum removal efficiency and elimination capacity in MEC-BTF were 1.48 and 1.65 times higher than those in open-circuit BTF (OC-BTF), respectively. Weak electrical stimulation had a positive impact on the characteristics of the biofilm. Additionally, microbial community analysis revealed that weak electrical stimulation increased the abundance of key functional genera (e.g., Rhodanobacter and Bacillus) and genes (e.g., catA/E and E1.3.1.32), thereby accelerating reductive dechlorination and ring-opening of m-DCB. Macrogenomic sequencing further revealed that electron transfer pathway in MEC-BTF might be mediated through extracellular electroactive mediators and cytochromes.

Simultaneously enhanced treatment efficiency of simulated hypersaline azo dye wastewater and membrane antifouling by a novel static magnetic field membrane bioreactor (SMFMBR)

Operation performance and membrane fouling of a novel static magnetic field membrane bioreactor (SMFMBR) for treatment of hypersaline azo dye wastewater was investigated. The results showed that SMFMBRs possessed higher efficiency of dye decolorization, COD removal and detoxification than the control MBR without SMF. The (3#) SMFMBR equipped with 305.0 mT (the highest intensity) SMF displayed the best treatment performance among all the four reactors (named as 0#-3#, equipped with SMFs of 0 mT, 95.0 mT, 206.3 mT and 305.0 mT, respectively). Potentially effective microbes belonging to Rhodanobacter, Saccharibacteria genera incertae sedis, Defluviimonas, Cellulomonas, Cutaneotrichosporon, Candida and Pichia were enriched in three SMFMBRs, in both of suspended sludge and bio-cakes. The relative abundance of Candida and Pichia in suspended sludge of 3# SMFMBR was the highest among all the four reactors, suggesting their successful colonization and potentially persistent effect of bioaugmentation. On the other hand, SMF of higher intensity effectively mitigated membrane fouling. Less production of soluble microbial products (SMP) and extracellular polymeric substances (EPS), lower protein/polysaccharide (PN/PS) ratio in SMP and EPS, looser structure of bio-cakes on membrane surface, as well as lower relative abundance of potential fouling causing microbes (mainly bacteria) in microbial communities were determined in 3# SMFMBR than the other three groups.

Bamboo charcoal powder-based polyurethane as packing material in biotrickling filter for simultaneous removal of n-hexane and dichloromethane

Bamboo charcoal powder-based polyurethane (BC-PU) was firstly applied in biotrickling filter to treat n-hexane and dichloromethane (DCM) simultaneously. Maximum elimination capacity of 12.68 g m^-3h^-1 n-hexane was achieved and exceed 30.28 g m^-3h^-1 DCM could be degraded. BTF respond quickly to the mixed shock loadings, and recovered to 76% and 100% respectively in less than 1 h. By increasing inlet loading (IL) of DCM from 6.20 g m^-3h^-1 to 28.36 g m^-3h^-1, the removal efficiency of n-hexane decreased from 73.4% to 55.9% corresponding to the IL of 19.96 g m^-3h^-1. N-hexane degradation was inhibited by high IL of DCM due to enzymes competition for active sites. The growth of key microorganisms Mycobacterium sp., Hyphomicrobium sp. was stimulated and colonized. BC-PU is an innovative and applicable bio-based material in the process of biological purification, which could be widely applied to treat hydrophobic pollutants in the pharmaceutical industry.

Effects of substrate fluctuation on the performance, microbial community and metabolic function of a biofilter for gaseous dichloromethane treatment

Dichloromethane (DCM) is a harmful volatile organic compound that usually originates from pharmaceutical industry. In this study, the treatment of gaseous DCM in a biofilter was investigated by gradually increasing the DCM inlet concentration. Nearly 80% of DCM could be removed when the inlet concentration was lower than 0.30 g m^-3. The maximum elimination capacity of 26.6 g m^-3·h^-1 was achieved at an inlet loading rate of 38.4 g m^-3·h^-1. However, with the increase in the inlet concentration to more than 0.60 g m^-3, the removal efficiency obviously decreased to about 40%. After a starvation period of 2 weeks, the biofilter rapidly recovered its performance. The Haldane model including a substrate inhibition term was applied to describe the kinetics of the biofilter. High-throughput sequencing indicated that DCM-degrading genera, such as Rhodanobacter sp., Hyphomicrobium sp., Rhizomicrobium sp., Bacillus sp., Pseudomonas sp., and Clostridium sp., were dominant in the biofilter in different operation phases. The microbial communities and diversities were greatly affected by the DCM concentration. Microbial metabolic functions were predicted using Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) database. The results indicated that xenobiotics biodegradation and metabolism, carbohydrate metabolism, and amino acid metabolism were the three most abundant metabolic pathways of the microbes. The abundances of these metabolic functions were also altered by the DCM concentration.

Removal of toluene vapor in the absence and presence of a quorum-sensing molecule in a biotrickling filter and microbial composition shift

Toluene is highly toxic and mutagenic, and it is generally used as an industrial solvent. Thus, toluene removal from air is necessary. To solve the problem of reducing high toluene concentrations with a short gas retention time (GRT), a quorum-sensing molecule [N-(3-oxododecanoyl)-L-homoserine lactone] (OHL) was added to a biotrickling filter (BTF). In this study, a BTF was used to treat synthetic and natural waste gases containing toluene. An extensive analysis was performed to understand the removal efficiency, removal characteristics, and bacterial community of the BTF. The addition of 20 μM OHL to the BTF significantly improved toluene removal, and more than 99.2% toluene removal was achieved at a GRT of 0.5 min when natural waste gas containing toluene (590-1020 ppm or 2.21-3.83 g m^-3) was introduced. The maximum inlet load for toluene was 337.9 g m^-3 h^-1. Moreover, the BTF exhibited satisfactory adaptability to shock loading and shutdown operations. Pseudomonadaceae (33.0%) and Comamonadaceae (26.3%) were predominant bacteria in the system after a 98-day operation. These bacteria were responsible for toluene degradation. The optimal moisture content and low pressure drop for system operations demonstrated that the BTF was energy and cost efficient. Therefore, processing through a BTF with OHL is a favorable technique for toluene treatment.

Biodegradation Potential and Diversity of Diclofenac-degrading Microbiota in an Immobilized Cell Biofilter

Despite that diclofenac has been embodied to the European watch list of priority substances of concern, studies on diclofenac biodegradation are limited and the diversity of diclofenac-degrading microbiota remains unknown. In this work, an immobilized cell biofilter was constructed and operated to evaluate its effectiveness to depurate high strength diclofenac wastewater and to identify the diclofenac-degrading community accommodated in activated sludge by employing high-throughput sequencing techniques. After a two-month adaptation period, biofilter removal efficiencies reached values as high as 97.63 ± 0.62%, whereas utilization of diclofenac in the immobilized cell biofilter led to a drastic pH decrease. Based on Illumina sequencing, the major bacterial taxa identified in the immobilized cell biofilter were members of the species Granulicella pectinivorans and Rhodanobacter terrae, followed by members of the species Castellaniella denitrificans, Parvibaculum lavamentivorans, Bordetella petrii, Bryocella elongata and Rhodopseudomonas palustris. The ability of such taxa to utilize a wide range of carbon sources and to effectively adapt under acidic conditions seemed to be the main parameters, which favored their prevalence in the immobilized cell biofilter. In addition, Wickerhamiella was the predominant fungal taxon in the immobilized cell biofilter, which appears to be actively involved in diclofenac degradation in activated sludge systems.

Evaluation on the removal performance of dichloromethane and toluene from waste gases using an airlift packing reactor

Biological removal of dichloromethane (DCM) from pharmaceutical industry is limited by its recalcitrance. In this study, an airlift packing reactor (ALPR), which combined the suspended and fixed-film microbial growth system, was set up to remove DCM and co-existed toluene. The removal performance of the ALPR for DCM was greater than traditional airlift reactor (ALR). The maximum elimination capacity (EC_max) of the ALPR for DCM reached 108 g m^-3 h^-1 with removal efficiency (RE) of 41%, increased by 145% if compared to the ALR. The EC_max for toluene was 172 g m^-3 h^-1 with RE of 70%, decreased by 25% if compared to the ALR, which was mainly due to the higher liquid-phase biomass in the ALR. The results of high-throughput sequencing showed that the microbial composition on the packings of the ALPR had a large difference from its liquid-phase or the liquid-phase of the ALR. Gemmobacter, Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata were genera with great abundance fixed on the packings and Rhizomicrobium, Chitinophaga, Vampirovibrio, and Fodinicurvata are first to be reported in VOCs biological removal. This study indicated that the ALPR can augment the microbial community and effectively improve the removal of recalcitrant VOCs.

Fungi Indirectly Affect Plant Root Architecture by Modulating Soil Volatile Organic Compounds

The plant-growth modulating effect of microbial volatile organic compounds (VOCs) has been demonstrated repeatedly. This has most often been performed by exposing plants to VOC released by microbes grown on nutrient rich media. Here, we used soil instead to grow fungi of the Fusarium genus and investigate how VOCs emitted by this system influenced the development of Arabidopsis plants. The volatile profiles of Fusarium strains grown in soil and malt extract were also compared. Our results demonstrate that distinct volatile signatures can be attributed to different Fusarium genetic clades but also highlight a major influence of the growth medium on volatile emission. Furthermore, all soil-grown Fusarium isolates increased primary root length in Arabidopsis by decreasing VOC concentrations in soil. This result represents a major paradigm shift in plant-microbe interactions since growth modulating effects have been attributed so far to the emission and not the consumption of volatile signals.