Hydroxychloroquine Adsorption in Aqueous Medium Using Clinoptilolite Zeolite

Unveiling the Broad-Spectrum Virucidal Potential of Purified Clinoptilolite-Tuff

Due to its remarkable surface properties, natural clinoptilolite-tuff interacts with a variety of biochemical, pharmaceutical, chemical, and microbiological entities, including human viruses. In the present work, the virucidal activity of purified clinoptilolite-tuff (PCT) was investigated using a variety of viruses, differing in their structure and composition. Influenza A virus, Herpes Simplex virus, Rhinovirus, and Parvovirus were chosen to represent enveloped and non-enveloped viruses with RNA and DNA genomes. Beside human viruses, Canine Parvovirus and bacteriophages T4 and MS2 were used to represent animal and bacterial viruses, respectively. The virucidal activity of PCT was quantified by examining the residual viral activity on susceptible cell lines upon incubation with PCT. A wide range of antiviral efficiencies was observed, ranging from up to 99% for Herpes Simplex virus to no activity for Rhinovirus and both bacteriophages. This study reveals that the virucidal potential of PCT is not universal and depends on a complex set of factors including virus structure and medium composition. The environmental and medical implications of this research are discussed for uses such as wastewater treatment or wound healing.

A Box-Behnken design-based chemometric approach to optimize the sono-photodegradation of hydroxychloroquine in water media using the Fe(0)/S2O82-/UV system

The huge utilization of hydroxychloroquine in autoimmune infections led to an abnormal increment in its concentration in wastewater, which can pose a real risk to the environment, necessitating the development of a pretreatment technique. To do this, we are interested in researching how hydroxychloroquine degrades in contaminated water. The main goal of this investigation is to optimize the operating conditions for the sono-photodegradation of hydroxychloroquine in water using an ultrasound-assisted Fe(0)/S 2 O 8 2 - /UV system. To get adequate removal of HCQ, a chemometric method based on the Box-Behnken design was applied to optimize the influence of the empirical parameters selected, including Fe(0) dose,S 2 O 8 2 - concentration, pH, and initial HCQ concentration. The quadratic regression model representing the HCQ removal rate (η(%)) was evolved and validated by ANOVA. The optimal conditions as a result of the above-mentioned trade-off between the four input variables, with η(%) as the dependent output variable, were captured using RSM methodology and the composite desirability function approach. For HCQ full decomposition, the optimal values of the operating factors are as follows:S 2 O 8 2 - dose, 194.309 mg/L; Fe(0) quantity, 198.83 mg/L; pH = 2.017, and HCQ initial dose of 296.406 mg/L. Under these conditions, the HCQ removal rate, achieved after 60 min of reaction, attained 98.95%.

Efficient adsorptive removal of used drugs during the COVID-19 pandemic from contaminated water by magnetic graphene oxide/MIL-88 metal-organic framework/alginate hydrogel beads

Currently, the presence of drugs used in the COVID-19 pandemic in water bodies is worrisome due to their high toxicity, which necessitates their critical removal by developing highly efficient adsorbents. Hence, in this study, alginate hydrogel beads of magnetic graphene oxide@MIL-88 metal-organic framework (GO@Fe3O4@MIL-88@Alg) were prepared for the first time and then utilized as a new absorption system for the removal of COVID-19 drugs such as doxycycline (DOX), hydroxychloroquine (HCQ), naproxen (NAP), and dipyrone (DIP) from aqueous solutions by batch adsorption manner. The effects of different experimental factors, such as adsorbent dosage, contact time, pH, drug concentration, temperature, ionic strength, presence of an external magnetic field (EMF), and magnet distance from the adsorption flask were optimized for the removal of COVID-19 drugs. The adsorption equilibrium isotherm proved that the adsorption process of DOX, HCQ, NAP, and DIP drugs on GO@Fe3O4@MIL-88@Alg hydrogel beads conformed to the Langmuir model and followed the pseudo-second-order adsorption kinetics. The maximum adsorption capacities of DOX, HCQ, NAP, and DIP drugs obtained for GO@Fe3O4@MIL-88@Alg hydrogel beads with the Langmuir model were 131.57, 79.92, 55.55, and 49.26 mg/g at 298 K, respectively. The thermodynamic study suggested a spontaneous endothermic adsorption process. Also, the conclusion from this study confirmed the validity of GO@Fe3O4@MIL-88@Alg hydrogel beads for excellent removal of COVID-19 drugs from water samples. It was also found that the GO@Fe3O4@MIL-88@Alg hydrogel beads could be reused with satisfactory removal efficiency in six cycles. Based on the study, the GO@Fe3O4@MIL-88@Alg hydrogel beads could be considered a sustainable, simple, economical, environmentally friendly absorption system for the removal of pharmaceutical contaminants from water.

Characterization and application of natural Moroccan material for methyl violet 2B dye removal from aqueous solution

In this paper, a natural Moroccan material from the Nador area in the north east of Morocco was studied as an adsorbent to remove methyl violet 2B dye from aqueous solutions. This material has never been studied before in this region, and it will be used in its raw state. It was collected and characterized by X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, X-ray fluorescence, thermal analysis, N₂ gas adsorption-desorption, pH_PZC, and Brunauer-Emmett-Teller (BET). The studies are realized with a 500-µm grain size and 182m²/g BET surface area. XRD showed the presence of significant peaks belonging to natural zeolite type clinoptilolite-Ca and minor phases. Several parameters were studied such as contact time, adsorbent mass, initial dye concentration, initial pH solution, the particle size of the material, and temperature. Out of the three isotherm models investigated after 60 min of contact time in the experiments, the Langmuir model gave the best fit to the experimental data (R² = 0.99). The results of kinetic and thermodynamic studies revealed that the adsorption process obeyed pseudo-second-order, spontaneous (ΔG° < 0), endothermic (ΔS° > 0). The adsorption of methyl violet 2B dye is chemisorptions and physisorption. The maximum theoretical adsorption capacity was 30.30 mg·g^-1 at 23 °C for a particle diameter of 500 µm. The desorption study shows that the material can be desorbed using solvents. The reuse study indicates that the same amount of natural zeolite can be used several times which makes the process efficient and sustainable. The obtained results indicate that the country of Morocco has natural zeolite among its resources and that it can be used as an efficient adsorbent for the removal of dyes.