Halophilic microbial communities in deteriorated buildings

Pretty in pink? Complementary strategies for analysing pink biofilms on historical buildings

Salt-weathering is a deterioration mechanism affecting building materials that results from repetitive cycles of salt crystallisation-dissolution in the porous mineral network under changing environmental conditions, causing damage to surfaces. However, an additional biodeterioration phenomenon frequently associated with salt efflorescence is the appearance of coloured biofilms, comprising halotolerant/halophilic microorganisms, containing carotenoid pigments that cause pinkish patinas. In this work, two Austrian historical salt-weathered buildings showing pink biofilms, the St. Virgil's Chapel and the Charterhouse Mauerbach, were investigated. Substrate chemistry (salt concentration/composition) was analysed by ion chromatography and X-ray diffraction to correlate these parameters with the associated microorganisms. Microbiomes were analysed by sequencing full-length 16S rRNA amplicons using Nanopore technology. Data demonstrates that microbiomes are not only influenced by salt concentration, but also by its chemical composition. The chapel showed a high overall halite (NaCl) concentration, but the factor influencing the microbiome was the presence/absence of K+. The K+ areas showed a dominance of Aliifodinibius and Salinisphaera species, capable of tolerating high salt concentrations through the "salt-in" strategy by transporting K+ into cells. Conversely, areas without K+ showed a community shift towards Halomonas species, which favour the synthesis of compatible solutes for salt tolerance. In the charterhouse, the main salts were sulphates. In areas with low concentrations, Rubrobacter species dominated, while in areas with high concentrations, Haloechinothrix species did. Among archaea, Haloccoccus species were dominant in all samples, except at high sulphate concentrations, where Halalkalicoccus prevailed. Finally, the biological pigments visible in both buildings were analysed by Raman spectroscopy, showing the same spectra in all areas investigated, regardless of the building and the microbiomes, demonstrating the presence of carotenoids in the pink biofilms. Comprehensive information on the factors affecting the microbiome associated with salt-weathered buildings should provide the basis for selecting the most appropriate desalination treatment to remove both salt efflorescence and associated biofilms.

Impact of Environmental Factors on the Formation and Development of Biological Soil Crusts in Lime Concrete Materials of Building Facades

Microbial colonization leads to the formation of biological soil crusts (BSCs) on the surface of architecture, which causes the deterioration of construction materials. However, little information is available on the formation of BSCs on lime concrete materials of early architecture. In this study, the variances of microbial communities, physicochemical properties, and surrounding environmental factors of the lime concrete facades from the early architecture of Wuhan University were investigated. It was found that the surface of lime concrete materials was internally porous and permeable, embedded with biofilms of cyanobacteria, mosses, bacteria, and fungi. Redundancy analysis (RDA) analysis showed that the abundances of photoautotrophic microorganisms depended on light intensity and moisture content of construction materials, while that of heterotrophic microorganisms depended on total nitrogen (TN) and NO3−-N content. The deposition of total carbon (TC), NH4+-N, and total organic carbon (TOC) was mainly generated by photoautotrophic microorganisms. The lime concrete surface of early architecture allowed internal growth of microorganisms and excretion of metabolites, which promoted the biodeterioration of lime concrete materials.

Black Fungi and Stone Heritage Conservation: Ecological and Metabolic Assays for Evaluating Colonization Potential and Responses to Traditional Biocides

Identifying species involved in biodeterioration processes is helpful, however further effort is needed to assess their ecological requirements and actual activity. Black fungi (BF) represent one of the most underestimated threats to stone cultural heritage in the Mediterranean basin; they are difficult to kill or remove due to their ability to grow inside the rock and cope with several stresses. Despite this, little is known about BF and factors favoring their growth on stone surfaces. Eighteen BF species were here investigated for temperature and salt tolerance, and metabolic traits by plate assays. The relation between some highly damaged monuments and their BF settlers was assessed using X-ray diffraction analysis, mercury intrusion porosimetry, and SEM. The sensitiveness to four commonly used traditional biocides was also tested. All strains were able to grow within the range of 5–25 °C and in the presence of 3.5% NaCl. Instrumental analyses were fundamental in discovering the relation between halophilic strains and weathered marble sculptures. The acid, cellulase, esterase, and protease production recorded proved BF’s potential to produce a chemical action on carbonate stones and likely affect other materials/historical artefacts. Besides, the use of carboxymethylcellulose and Tween 20 should be evaluated in restoration practice to prevent tertiary bioreceptivity. Agar diffusion tests helped identify the most resistant species to biocides, opening the perspective of its use as reference organisms in material testing procedures.

Bacterial Growth in Brines Formed by the Deliquescence of Salts Relevant to Cold Arid Worlds

Hygroscopic salts at Mars' near-surface (MgSO₄, (per)chlorates, NaCl) may form brines by absorbing moisture from the atmosphere at certain times through the process of deliquescence. We have previously shown strong bacterial growth in saturated MgSO₄ (∼67% w/v as epsomite) at room temperature, and growth was observed at the MgSO₄ eutectic point (43% w/v at -4°C). Here, we have investigated the growth of salinotolerant microbes (Halomonas, Marinococcus, Planococcus) from Hot Lake, Washington; Basque Lake, British Columbia; and Great Salt Plains, Oklahoma under deliquescing conditions. Bacterial cultures were grown to mid-log phase in SP medium supplemented with 50% MgSO₄ (as epsomite), 20% NaClO₃, or 10% NaCl (w/v), and small aliquots in cups were dried by vacuum desiccation. When the dried culture was rehydrated by the manual addition of water, the culture resumed growth in the reconstituted brine. When desiccated cultures were maintained in a sealed container with a brine reservoir of the matching growth medium controlling the humidity of the headspace, the desiccated microbial culture evaporites formed brine by deliquescence using humidity alone. Bacterial cultures resumed growth in all three salts once rehydrated by deliquescence. Cultures of Halomonas sp. str. HL12 showed robust survival and growth when subjected to several cycles of desiccation and deliquescent or manual rehydration. Our laboratory demonstrations of microbial growth in deliquescent brines are relevant to the surface and near-subsurface of cold arid worlds like Mars. When conditions become wetter, hygroscopic evaporite minerals can deliquesce to produce the earliest habitable brines. Survival after desiccation and growth in deliquescent brines increases the likelihood that microbes from Earth, carried on spacecraft, pose a contamination risk to Mars.

Comparison of different sequencing strategies for assembling chromosome-level genomes of extremophiles with variable GC content

In this study, six bacterial isolates with variable GC, including Escherichia coli as mesophilic reference strain, were selected to compare hybrid assembly strategies based on next-generation sequencing (NGS) of short reads, single-tube long-fragment reads (stLFR) sequencing, and Oxford Nanopore Technologies (ONT) sequencing platforms. We obtained the complete genomes using the hybrid assembler Unicycler based on the NGS and ONT reads; others were de novo assembled using NGS, stLFR, and ONT reads by using different strategies. The contiguity, accuracy, completeness, sequencing costs, and DNA material requirements of the investigated strategies were compared systematically. Although all sequencing data could be assembled into accurate whole-genome sequences, the stLFR sequencing data yield a scaffold with more contiguity with more completeness of gene function than NGS sequencing assemblies. Our research provides a low-cost chromosome-level genome assembly strategy for large-scale sequencing of extremophile genomes with different GC contents.

Decontamination of microbiologically contaminated abiotic porous surfaces in an oral surgery clinic using vaporised hydrogen peroxide (VHP)

PURPOSE

The aims of the study were to identify microorganisms, including those in the VBNC state, inhabiting porous surfaces in oral surgery offices and to assess the biocidal effectiveness and impact of 300 ppm vaporised hydrogen peroxide (VHP) for 20 min on decontaminated materials.

METHODS

From the surfaces of textured armrests of dental chairs, pinewood doors and window frames and cotton medical aprons, 30 swabs were taken with moistened sponges. The identification of isolated microorganisms was performed using molecular methods with MALDI-TOF MS, DNA Sanger sequencer and Illumina MiSeq. To evaluate the impact of VHP decontamination (independent variable) on the number of microorganisms (response variable) ANOVA and LSD tests were used. After application of 10 processes of VHP decontamination, changes in the properties of the materials were assessed using FTIR spectroscopy, SEM microscopy and XPS spectrometry.

RESULTS

The concentration of microorganisms was 10¹-10⁴ CFU/100 cm² on the tested surfaces and 10² CFU/m³ in the air. Twenty species of bacteria, one yeast and 16 filamentous fungi were identified, with the predominance of Bacillus, Staphylococcus, Alternaria, Aspergillus and Penicillium. Moreover, Janthinobacterium, Acremonium, Aureobasidium, Coprinellus and Cosmospora in the VBNC state were metagenomically detected. VHP decontamination resulted in a reduction in the majority of tested microbial strains by a minimum of 3 log, and all tested mixed cultures inhabiting porous surfaces were above 98% and in the air, 100%. VHP decontamination did not affect the structural and morphological properties of cotton fibres, wood or stainless steel.

CONCLUSIONS

VHP decontamination at a concentration of 300 ppm for 20 min can be used for the holistic disinfection of air, surfaces and equipment in oral surgery offices.

Biofilms: The Microbial "Protective Clothing" in Extreme Environments

Microbial biofilms are communities of aggregated microbial cells embedded in a self-produced matrix of extracellular polymeric substances (EPS). Biofilms are recalcitrant to extreme environments, and can protect microorganisms from ultraviolet (UV) radiation, extreme temperature, extreme pH, high salinity, high pressure, poor nutrients, antibiotics, etc., by acting as "protective clothing". In recent years, research works on biofilms have been mainly focused on biofilm-associated infections and strategies for combating microbial biofilms. In this review, we focus instead on the contemporary perspectives of biofilm formation in extreme environments, and describe the fundamental roles of biofilm in protecting microbial exposure to extreme environmental stresses and the regulatory factors involved in biofilm formation. Understanding the mechanisms of biofilm formation in extreme environments is essential for the employment of beneficial microorganisms and prevention of harmful microorganisms.

Untargeted Metabolomics Approach in Halophiles: Understanding the Biodeterioration Process of Building Materials

The aim of the study was to explore the halophile metabolome in building materials using untargeted metabolomics which allows for broad metabolome coverage. For this reason, we used high-performance liquid chromatography interfaced to high-resolution mass spectrometry (HPLC/HRMS). As an alternative to standard microscopy techniques, we introduced pioneering Coherent Anti-stokes Raman Scattering Microscopy (CARS) to non-invasively visualize microbial cells. Brick samples saturated with salt solution (KCl, NaCl (two salinity levels), MgSO4, Mg(NO3)2), were inoculated with the mixture of preselected halophilic microorganisms, i.e., bacteria: Halobacillus styriensis, Halobacillus naozhouensis, Halobacillus hunanensis, Staphylococcus succinus, Marinococcus halophilus, Virgibacillus halodenitryficans, and yeast: Sterigmatomyces halophilus and stored at 28°C and 80% relative humidity for a year. Metabolites were extracted directly from the brick samples and measured via HPLC/HRMS in both positive and negative ion modes. Overall, untargeted metabolomics allowed for discovering the interactions of halophilic microorganisms with buildings materials which together with CARS microscopy enabled us to elucidate the biodeterioration process caused by halophiles. We observed that halophile metabolome was differently affected by different salt solutions. Furthermore, we found indications for haloadaptive strategies and degradation of brick samples due to microbial pigment production as a salt stress response. Finally, we detected changes in lipid content related to changes in the structure of phospholipid bilayers and membrane fluidity.

Identification of Carotenoids and Isoprenoid Quinones from Asaia lannensis and Asaia bogorensis

The aim of the study was to identify and quantitatively assess of carotenoids and isoprenoid quinones biosynthesized by six different strains of acetic acid bacteria, belonging to genus Asaia, that are common beverage-spoiling bacteria in Europe. Bacterial cultures were conducted in a laboratory liquid culture minimal medium with 2% sucrose. Carotenoids and isoprenoid quinones were investigated using UHPLC-DAD-ESI-MS analysis. In general, tested strains of Asaia spp. were able to produce 10 carotenoids and 3 isoprenoid quinones: menaquinone-7, menaquinone-8, and ubiquinone-10. The main identified carotenoids in Asaia lannensis strains were phytofluene, neurosporene, α-carotene, while for Asaia bogorensis, neurosporene, canthaxanthin, and zeaxanthin were noted. What is more, tested Asaia spp. were able to produce myxoxanthophyll, which has so far been identified primarily in cyanobacteria. The results show that A. lannensis are characterized by statistically higher concentrations of produced carotenoids, as well as a greater variety of these compounds. We have noted that carotenoids were not only accumulated by bacterial cells, but also some strains of A. lannensis produced extracellular carotenoids.

Factors Determining the Biodiversity of Halophilic Microorganisms on Historic Masonry Buildings

The aim of the present study was to obtain insights into the relationship between the chemical (salt content and pH) and physico-mechanical (humidity and compressive strength) properties of mineral-based materials from historic buildings with salt efflorescence and the growth and biodiversity of halophilic microorganisms. Samples were mainly characterized by pH 6.5–8.5 and a moisture content of between 0.12 and 3.3%. Significant variations were also found in the salt content (sulfates, chlorides, and nitrates) of the materials. An SEM/EDS analysis of material surfaces revealed the presence of halite, calcite, gypsum, sodium sulfate, and potassium-sodium sulfate. Culture-dependent and culture-independent (clone library construction) approaches were both applied to detect halophilic microorganisms. Results derived from culturable methods and the materials analysis revealed a correlation between the total halophile count and pH value as well as sulfate content. A correlation was not observed between the concentration of chlorides or nitrates and the number of halophilic microorganisms. The materials studied were inhabited by the culturable halophilic bacteria Halobacillus sp., Virgibacillus sp., and Marinococcus sp. as well as the yeast Sterigmatomyces sp., which was isolated for the first time from mineral materials. Culture-independent techniques revealed the following bacterial species: Salinibacterium, Salinisphaera, Rubrobacter, Rubricoccus, Halomonas, Halorhodospira, Solirubrobacter, Salinicoccus, and Salinibacter. Biodiversity was the highest in materials with high or moderate salinity.

Halophiles: biology, adaptation, and their role in decontamination of hypersaline environments

The unique cellular enzymatic machinery of halophilic microbes allows them to thrive in extreme saline environments. That these microorganisms can prosper in hypersaline environments has been correlated with the elevated acidic amino acid content in their proteins, which increase the negative protein surface potential. Because these microorganisms effectively use hydrocarbons as their sole carbon and energy sources, they may prove to be valuable bioremediation agents for the treatment of saline effluents and hypersaline waters contaminated with toxic compounds that are resistant to degradation. This review highlights the various strategies adopted by halophiles to compensate for their saline surroundings and includes descriptions of recent studies that have used these microorganisms for bioremediation of environments contaminated by petroleum hydrocarbons. The known halotolerant dehalogenase-producing microbes, their dehalogenation mechanisms, and how their proteins are stabilized is also reviewed. In view of their robustness in saline environments, efforts to document their full potential regarding remediation of contaminated hypersaline ecosystems merits further exploration.