Efficient, environmentally-friendly and specific valorization of lignin: promising role of non-radical lignolytic enzymes

Microbial lignin valorization through depolymerization to aromatics conversion

Lignin is the most abundant source of renewable aromatic biopolymers and its valorization presents significant value for biorefinery sustainability, which promotes the utilization of renewable resources. However, it is challenging to fully convert the structurally complex, heterogeneous, and recalcitrant lignin into high-value products. The in-depth research on the lignin degradation mechanism, microbial metabolic pathways, and rational design of new systems using synthetic biology have significantly accelerated the development of lignin valorization. This review summarizes the key enzymes involved in lignin depolymerization, the mechanisms of microbial lignin conversion, and the lignin valorization application with integrated systems and synthetic biology. Current challenges and future strategies to further study lignin biodegradation and the trends of lignin valorization are also discussed.

Lower Funneling Pathways in Scedosporium Species

Lignin, a natural polyaromatic macromolecule, represents an essential component of the lignocellulose biomass. Due to its complexity, the natural degradation of this molecule by microorganisms still remains largely misunderstood. Extracellular oxidative degradation is followed by intracellular metabolic degradation of conserved aromatic intermediate compounds (protocatechuate, catechol, hydroxyquinol, and gentisic acid) that are used as carbon and energy sources. The lower funneling pathways are characterized by the opening of the aromatic ring of these molecules through dioxygenases, leading to degradation products that finally enter into the tricarboxylic acid (TCA) cycle. In order to better understand the adaptation mechanisms of Scedosporium species to their environment, these specific catabolism pathways were studied. Genes encoding ring-cleaving dioxygenases were identified in Scedosporium genomes by sequence homology, and a bioinformatic analysis of the organization of the corresponding gene clusters was performed. In addition, these predictions were confirmed by evaluation of the expression level of the genes of the gentisic acid cluster. When the fungus was cultivated in the presence of lignin or gentisic acid as sole carbon source, experiments revealed that the genes of the gentisic acid cluster were markedly overexpressed in the two Scedosporium species analyzed (Scedosporium apiospermum and Scedosporium aurantiacum). Only the gene encoding a membrane transporter was not overexpressed in the gentisic acid-containing medium. Together, these data suggest the involvement of the lower funneling pathways in Scedosporium adaptation to their environment.

Scope and limitations of biocatalytic carbonyl reduction with white-rot fungi

The reductive activity of various basidiomycetous fungi towards carbonyl compounds was screened on an analytical level. Some strains displayed high reductive activities toward aromatic carbonyls and aliphatic ketones. Utilizing growing whole-cell cultures of Dichomitus albidofuscus, the reactions were up-scaled to a preparative level in an aqueous system. The reactions showed excellent selectivities and gave the respective alcohols in high yields. Carboxylic acids were also reduced to aldehydes and alcohols under the same conditions. In particular, benzoic, vanillic, ferulic, and p-coumaric acid were reduced to benzyl alcohol, vanillin, dihydroconiferyl alcohol and 1-hydroxy-3-(4-hydroxyphenyl)propan, respectively.

Lignin Degradation and Its Use in Signaling Development by the Coprophilous Ascomycete Podospora anserina

The filamentous fungus Podospora anserina is a good model to study the breakdown of lignocellulose, owing to its ease of culture and genetical analysis. Here, we show that the fungus is able to use a wide range of lignocellulosic materials as food sources. Using color assays, spectroscopy and pyrolysis-gas chromatography mass spectrometry, we confirm that this ascomycete is able to degrade lignin, primarily by hydrolyzing β-O-4 linkages, which facilitates its nutrient uptake. We show that the limited weight loss that is promoted when attacking Miscanthus giganteus is due to a developmental blockage rather than an inefficiency of its enzymes. Finally, we show that lignin, and, more generally, phenolics, including degradation products of lignin, greatly stimulate the growth and fertility of the fungus in liquid cultures. Analyses of the CATΔΔΔΔΔ mutant lacking all its catalases, pro-oxidants and antioxidants indicate that improved growth and fertility of the fungus is likely caused by augmented reactive oxygen species levels triggered by the presence of phenolics.

A method for high-throughput screening hydrolase of lignin β-aryl ether linkage from directed evolution by glutathione (GSH) assay

Background

Lignin’s valorization plays a critical role in refining the bioresource. Considering that the β-aryl ether linkage (β-O-4 bond) accounts for 50–70% of lignin chemical linkage between aromatic rings, the hydrolase of lignin β-aryl ether linkage, especially the β-etherase, provided a promising way for the lignin depolymerization and valorization. As a result, it is essential to develop the effective high-throughput methods for screening the mutant library of β-etherase from directed evolution.

Results

Based on the enzymatic mechanism of β-O-4 bond’s cleavage by β-etherase, the LigF was selected as the model to study high-throughput method by GSH assay for screening the mutant library of β-etherase from directed evolution. After the primary study with purified LigF and cell lysate, the GSH assay was used to screen mutant library of β-etherase. The study on screening the mutant library with about 600 colonies indicated that the selected transformants all have one or two mutated sites in the gene sequence of LigF, and the activities from GSH assay of most selected transformants were the same as their activities from HPLC assay.

Conclusions

The results from the high-throughput screening of mutant library demonstrated that GSH assay could be applied to screen β-etherase mutant from directed evolution.

Harnessing the Power of Enzymes for Tailoring and Valorizing Lignin

Lignin, a structural component of lignocellulosic plants, is an alternative raw material with enormous potential to replace diminishing fossil-based resources for the sustainable production of many chemicals and materials. Unfortunately, lignin's heterogeneity, low reactivity, and strong intra- and intermolecular hydrogen interactions and modifications introduced during the pulping process present significant technical challenges. However, the increasing ability to tailor lignin biosynthesis pathways by targeting enzymes and the continued discovery of more robust biocatalysts are enabling the synthesis of novel valuable products. This review summarizes how enzymes involved in lignin biosynthesis pathways and microbial enzymes are being harnessed to produce chemicals and materials and to upgrade lignin properties for the synthesis of a variety of value-added lignin industrial products.

Mapping the Secretome and Its N-Linked Glycosylation of Pleurotus eryngii and Pleurotus ostreatus Grown on Hemp Stalks

Our previous research showed that Pleurotus eryngii and Pleurotus ostreatus were effective fungi for pretreatment of industrial hemp stalks to improve enzymatic saccharification. The secretomes of these two fungi were analyzed to search for the effective enzyme cocktails degrading hemp lignin during the pretreatment process. In total, 169 and 155 proteins were identified in Pleurotus eryngii and Pleurotus ostreatus, respectively, and 50% of the proteins involved in lignocellulose degradation were CAZymes. Because most of the extracellular proteins secreted by fungi are glycosylated proteins, the N-linked glycosylation of enzymes could be mapped. In total, 27 and 24 N-glycosylated peptides were detected in Pleurotus eryngii and Pleurotus ostreatus secretomes, respectively. N-Glycosylated peptides of laccase, GH92, exoglucanase, phenol oxidase, α-galactosidase, carboxylic ester hydrolase, and pectin lyase were identified. Deglycosylation could decrease enzymatic saccharification of hemp stalks. The activities of laccase, α-galactosidase, and phenol oxidase and the thermal stability of laccase were reduced after deglycosylation.

Recent advances in lignin valorization with bacterial cultures: microorganisms, metabolic pathways, and bio-products

Lignin is the most abundant aromatic substrate on Earth and its valorization technologies are still under developed. Depolymerization and fragmentation are the predominant preparatory strategies for valorization of lignin to chemicals and fuels. However, due to the structural heterogeneity of lignin, depolymerization and fragmentation typically result in diverse product species, which require extensive separation and purification procedures to obtain target products. For lignin valorization, bacterial-based systems have attracted increasing attention because of their diverse metabolisms, which can be used to funnel multiple lignin-based compounds into specific target products. Here, recent advances in lignin valorization using bacteria are critically reviewed, including lignin-degrading bacteria that are able to degrade lignin and use lignin-associated aromatics, various associated metabolic pathways, and application of bacterial cultures for lignin valorization. This review will provide insight into the recent breakthroughs and future trends of lignin valorization based on bacterial systems.

Supported Ionic Liquid Membranes for Separation of Lignin Aqueous Solutions

Lignin valorization is a key aspect to design sustainable management systems for lignocellulosic biomass. The successful implementation of bio-refineries requires high value added applications for the chemicals derived from lignin. Without effective separation processes, the achievement of this purpose is difficult. Supported ionic liquid membranes can play a relevant role in the separation and purification of lignocellulosic components. This work investigated different supported ionic liquid membranes for selective transport of two different types of technical lignins (Kraft lignin and lignosulphonate) and monosaccharides (xylose and glucose) in aqueous solution. Although five different membrane supports and nine ionic liquids were tested, only the system composed by [BMIM][DBP] as an ionic liquid and polytetrafluoroethylene (PTFE) as a membrane support allowed the selective transport of the tested solutes. The results obtained with this selective membrane demonstrated that lignins were more slowly transferred from the feed compartment to the stripping compartment through the membrane than the monosaccharides. A model was proposed to calculate the effective mass transfer constants of the solutes through the membrane (values in the range 0.5–2.0 × 10−3 m/h). Nevertheless, the stability of this identified selective membrane and its potential to be implemented in effective separation processes must be further analyzed.

Biosensor libraries harness large classes of binding domains for construction of allosteric transcriptional regulators

The ability of bacteria to sense specific molecules within their environment and trigger metabolic responses in accordance is an invaluable biotechnological resource. While many transcription factors (TFs) mediating such processes have been studied, only a handful have been leveraged for molecular biology applications. To expand the repertoire of biotechnologically relevant sensors we present a strategy for the construction and testing of chimeric TF libraries, based on the fusion of highly soluble periplasmic binding proteins (PBPs) with DNA-binding domains (DBDs). We validate this concept by constructing and functionally testing two unique sense-and-respond regulators for benzoate, an environmentally and industrially relevant metabolite. This work will enable the development of tailored biosensors for novel synthetic regulatory circuits.

Bacterially encoded environmental sensor proteins are potentially a rich source of transcriptional control but only a few have been harnessed for biotechnological applications. Here the authors develop a general strategy for designing custom-made monogenic synthetic sensors and validate the approach by designing two sense-and-respond regulators for benzoate.

Alternatives for Chemical and Biochemical Lignin Valorization: Hot Topics from a Bibliometric Analysis of the Research Published During the 2000–2016 Period

A complete bibliometric analysis of the Scopus database was performed to identify the research trends related to lignin valorization from 2000 to 2016. The results from this analysis revealed an exponentially increasing number of publications and a high relevance of interdisciplinary collaboration. The simultaneous valorization of the three main components of lignocellulosic biomass (cellulose, hemicellulose, and lignin) has been revealed as a key aspect and optimal pretreatment is required for the subsequent lignin valorization. Research covers the determination of the lignin structure, isolation, and characterization; depolymerization by thermal and thermochemical methods; chemical, biochemical and biological conversion of depolymerized lignin; and lignin applications. Most methods for lignin depolymerization are focused on the selective cleavage of the β-O-4 linkage. Although many depolymerization methods have been developed, depolymerization with sodium hydroxide is the dominant process at industrial scale. Oxidative conversion of lignin is the most used method for the chemical lignin upgrading. Lignin uses can be classified according to its structure into lignin-derived aromatic compounds, lignin-derived carbon materials and lignin-derived polymeric materials. There are many advances in all approaches, but lignin-derived polymeric materials appear as a promising option.