Characterization of biosurfactants produced by the oil-degrading bacterium Rhodococcus erythropolis S67 at low temperature

Glycolipids biosurfactants production using low-cost substrates for environmental remediation: progress, challenges, and future prospects

The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.

The Potential Implications of Sex-Specific Differences in the Intestinal Bacteria of the Overwintering Wolf Spider Pardosa astrigera (Araneae: Lycosidae)

Gut microbiota can promote the resistance of host arthropods to low-temperature stress. Female Pardosa astrigera have a lower anti-freeze compound level and weaker resistance to cold temperatures than the males in winter, which implies that their intestinal bacteria may be different during overwintering. This study primarily compared the intestinal bacterial communities between the two sexes of P. astrigera in a temperate region using 16S rRNA gene sequencing. Our findings indicated that the Chao1 and Shannon indices of intestinal bacteria in females were significantly higher than those in males, while the Simpson index in females was significantly lower than that in males. The male intestinal bacterial community was characterized by Proteobacteria and Actinobacteriota at the phylum level and by Pseudomonas and Rhodococcus at the genus level, with total relative abundances of 89.58% and 85.22%, respectively, which were also significantly higher than those in females, whose total relative abundances were 47.49% and 43.68%, respectively. In contrast, the total relative abundances of Bacteroidota and Firmicutes were significantly lower in males (4.26% and 4.75%, respectively) than in females (26.25% and 22.31%, respectively). Noteworthy divergences in bacterial communities were also found through an LEfSe analysis between females and males. Additionally, the results of the PICRUSt2 analysis showed that six out of eleven level-2 pathways related to key metabolic functions were significantly (or marginally significantly) higher in females than males, and five other level-2 pathways were significantly (or marginally significantly) lower in females than males. Our results imply that significant gender differences exist in intestinal bacterial communities of overwintering P. astrigera. We suggest that Pseudomonas versuta (belonging to Proteobacteria) and Rhodococcus erythropolis (belonging to Actinobacteriota) may have the potential to play key roles in overwintering P. astrigera.

Chemotaxis-mediated degradation of PAHs and heterocyclic PAHs under low-temperature stress by Pseudomonas fluorescens S01: Insights into the mechanisms of biodegradation and cold adaptation

As wellknown persistent contaminants, polycyclic aromatic hydrocarbons (PAHs) and heterocyclic polyaromatic hydrocarbons (Heterocyclic PAHs)'s fates in cryogenic environments are remains uncertain. Herein, strain S01 was identified as Pseudomonas fluorescens, a novel bacterium tolerant to low temperature and capable of degrading PAHs and heterocyclic PAHs. Strain S01 exhibited growth at 5-40 ℃ and degradation rate of mixed PAHs and heterocyclic PAHs reached 52% under low-temperature. Through comprehensive metabolomic, genomic, and transcriptomic analyses, we reconstructed the biodegradation pathway for PAHs and heterocyclic PAHs in S01 while investigating its response to low temperature. Further experiments involving deletion and replacement of methyl-accepting chemotaxis protein (MCP) confirmed its crucial role in enabling strain S01's adaptation to dual stress of low temperature and pollutants. Additionally, our analysis revealed that MCP was upregulated under cold stress which enhanced strain S01's motility capabilities leading to increased biofilm formation. The establishment of biofilm promoted preservation of distinct cellular membrane stability, thereby enhancing energy metabolism. Consequently, this led to heightened efficiency in pollutant degradation and improved cold resistance capabilities. Our findings provide a comprehensive understanding of the environmental fate of both PAHs and heterocyclic PAHs under low-temperature conditions while also shedding light on cold adaptation mechanism employed by strain S01.

Biodesulfurization of organosulfur compounds by a trehalose biosurfactant producing Gordonia sp. isolated from crude oil contaminated soil

Certain factors hinder the commercialization of biodesulfurization process, including low substrate-specificity of the currently reported desulfurizing bacteria and restricted mass transfer of organic-sulfur compounds in biphasic systems. These obstacles must be addressed to clean organic-sulfur rich petro-fuels that pose serious environmental and health challenges. In current study, a dibenzothiophene desulfurizing strain, Gordonia rubripertincta W3S5 (source: oil contaminated soil) was systematically evaluated for its potential to remove sulfur from individual compounds and mixture of organic-sulfur compounds. Metabolic and genetic analyses confirmed that strain W3S5 desulfurized dibenzothiophene to 2-hydroxybiphenyl, suggesting that it follows the sulfur specific 4 S pathway. Furthermore, this strain demonstrated the ability to produce trehalose biosurfactants (with an EI24 of 53%) in the presence of dibenzothiophene, as confirmed by TLC and FTIR analyses. Various genome annotation tools, such as ClassicRAST, BlastKOALA, BV-BRC, and NCBI-PGAP, predicted the presence of otsA, otsB, treY, treZ, treP, and Trehalose-monomycolate lipid synthesis genes in the genomic pool of strain W3S5, confirming the existence of the OtsAB, TreYZ, and TreP pathways. Overall, these results underscore the potential of strain W3S5 as a valuable candidate for enhancing desulfurization efficiency and addressing the mass transfer challenges essential for achieving a scaled-up scenario.

Autochthonous psychrophilic hydrocarbonoclastic bacteria and its ecological function in contaminated cold environments

Petroleum hydrocarbon (PH) pollution has mostly been caused by oil exploration, extraction, and transportation activities in colder regions, particularly in the Arctic and Antarctic regions, where it serves as a primary source of energy. Due to the resilience feature of nature, such polluted environments become the realized ecological niches for a wide community of psychrophilic hydrocarbonoclastic bacteria (PHcB). In contrast, to other psychrophilic species, PHcB is extremely cold-adapted and has unique characteristics that allow them to thrive in greater parts of the cold environment burdened with PHs. The stated group of bacteria in its ecological niche aids in the breakdown of litter, turnover of nutrients, cycling of carbon and nutrients, and bioremediation. Although such bacteria are the pioneers of harsh colder environments, their growth and distribution remain under the influence of various biotic and abiotic factors of the environment. The review discusses the prevalence of PHcB community in colder habitats, the metabolic processes involved in the biodegradation of PH, and the influence of biotic and abiotic stress factors. The existing understanding of the PH metabolism by PHcB offers confirmation of excellent enzymatic proficiency with high cold stability. The discovery of more flexible PH degrading strategies used by PHcB in colder environments could have a significant beneficial outcome on existing bioremediation technologies. Still, PHcB is least explored for other industrial and biotechnological applications as compared to non-PHcB psychrophiles. The present review highlights the pros and cons of the existing bioremediation technologies as well as the potential of different bioaugmentation processes for the effective removal of PH from the contaminated cold environment. Such research will not only serve to investigate the effects of pollution on the basic functional relationships that form the cold ecosystem but also to assess the efficacy of various remediation solutions for diverse settings and climatic conditions.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

Characterization of trehalolipid biosurfactant produced by the novel marine strain Rhodococcus sp. SP1d and its potential for environmental applications

BACKGROUND

Biosurfactants are surface-active compounds with environmental and industrial applications. These molecules show higher biocompatibility, stability and efficiency compared to synthetic surfactants. On the other hand, biosurfactants are not cost-competitive to their chemical counterparts. Cost effective technology such as the use of low-cost substrates is a promising approach aimed at reducing the production cost. This study aimed to evaluate the biosurfactant production and activity by the novel strain Rhodococcus sp. SP1d by using different growth substrates. Therefore, to exploit the biosurfactant synthesized by SP1d for environmental applications, the effect of this compound on the bacteria biofilm formation was evaluated. Eventually, for a possible bioremediation application, the biosurfactant properties and its chemical characteristics were investigated using diesel as source of carbon.

RESULTS

Rhodococcus sp. SP1d evidence the highest similarity to Rhodococcus globerulus DSM 43954^T and the ability to biosynthesize surfactants using a wide range of substrates such as exhausted vegetable oil, mineral oil, butter, n-hexadecane, and diesel. The maximum production of crude biosurfactant after 10 days of incubation was reached on n-hexadecane and diesel with a final yield of 2.38 ± 0.51 and 1.86 ± 0.31 g L^- 1 respectively. Biosurfactants produced by SP1d enhanced the biofilm production of P. protegens MP12. Moreover, the results showed the ability of SP1d to produce biosurfactants on diesel even when grown at 10 and 18 °C. The biosurfactant activity was maintained over a wide range of NaCl concentration, pH, and temperature. A concentration of 1000 mg L^- 1 of the crude biosurfactant showed an emulsification activity of 55% towards both xylene and olive oil and a reduction of 25.0 mN m^- 1 of surface tension of water. Eventually, nuclear magnetic resonance spectroscopy indicated that the biosurfactant is formed by trehalolipids.

CONCLUSIONS

The use of low-cost substrates such as exhausted oils and waste butter reduce both the costs of biosurfactant synthesis and the environmental pollution due to the inappropriate disposal of these residues. High production yields, stability and emulsification properties using diesel and n-hexadecane as substrates, make the biosurfactant produced by SP1d a sustainable biocompound for bioremediation purpose. Eventually, the purified biosurfactant improved the biofilm formation of the fungal antagonistic strain P. protegens MP12, and thus seem to be exploitable to increase the adherence and colonization of plant surfaces by this antagonistic strain and possibly enhance antifungal activity.

Use of surfactants in biodegradation of hydrophobic compounds: A review

Industrial development has led to immense emission and accumulation of hydrophobic organic compounds (HOC) in the environment. Primarily, they include petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). The extensive use of hydrophobic pesticides in agriculture led to the contamination of soil, air and water. Many of the hydrophobic substances are dangerous for the biota due to their high toxicity and carcinogenic and mutagenic activity. In addition to their widespread use, the possible adverse effects are also determined by their resistance to decomposition, including the biological one, which defines their long-term persistence in soil, water and other media. The impact of HOC on ecosystems poses a potential threat not only to the environment but also to human health. Numerous studies were devoted to the remediation of soils polluted with HOC. The approaches to remediation can be conditionally divided into mechanical, chemical and bio-methods, with the former two being widely used in the past. Bioremediation methods proved more efficient and, as a rule, more cost-effective and environmentally friendly. In recent years, the good efficiency of solubilizing agents in bioremediation processes has been demonstrated. Various surfactants have become widely popular due to their ability to increase desorption, water solubility and microbial bioavailability of HOC. In this brief review, state-of-the-art literature data on the biodegradation of hydrophobic organic compounds using surfactants were considered.

Surface-Active Compounds Produced by Microorganisms: Promising Molecules for the Development of Antimicrobial, Anti-Inflammatory, and Healing Agents

Surface-active compounds (SACs), biomolecules produced by bacteria, yeasts, and filamentous fungi, have interesting properties, such as the ability to interact with surfaces as well as hydrophobic or hydrophilic interfaces. Because of their advantages over other compounds, such as biodegradability, low toxicity, antimicrobial, and healing properties, SACs are attractive targets for research in various applications in medicine. As a result, a growing number of properties related to SAC production have been the subject of scientific research during the past decade, searching for potential future applications in biomedical, pharmaceutical, and therapeutic fields. This review aims to provide a comprehensive understanding of the potential of biosurfactants and emulsifiers as antimicrobials, modulators of virulence factors, anticancer agents, and wound healing agents in the field of biotechnology and biomedicine, to meet the increasing demand for safer medical and pharmacological therapies.

Hydrocarbons Biodegradation by Rhodococcus: Assimilation of Hexadecane in Different Aggregate States

The aim of our study was to reveal the peculiarities of the adaptation of rhodococci to hydrophobic hydrocarbon degradation at low temperatures when the substrate was in solid states. The ability of actinobacteria Rhodococcus erythropolis (strains X5 and S67) to degrade hexadecane at 10 °C (solid hydrophobic substrate) and 26 °C (liquid hydrophobic substrate) is described. Despite the solid state of the hydrophobic substrate at 10 °C, bacteria demonstrate a high level of its degradation (30–40%) within 18 days. For the first time, we show that specialized cellular structures are formed during the degradation of solid hexadecane by Rhodococcus at low temperatures: intracellular multimembrane structures and surface vesicles connected to the cell by fibers. The formation of specialized cellular structures when Rhodococcus bacteria are grown on solid hexadecane is an important adaptive trait, thereby contributing to the enlargement of a contact area between membrane-bound enzymes and a hydrophobic substrate.

A review on the physicochemical and biological applications of biosurfactants in biotechnology and pharmaceuticals

Biosurfactants are the chemical compounds that are obtained from various micro-organisms and possess the ability to decrease the interfacial tension between two similar or different phases. The importance of biosurfactants in cosmetics, pharmaceuticals, biotechnology, agriculture, food and oil industries has made them an interesting choice in various physico-chemical and biological applications. With the aim of representing different properties of biosurfactants, this review article is focused on emphasizing their applications in various industries summarizing their importance in each field. Along with this, the production of recently developed chemically and biologically important biosurfactants has been outlined. The advantages of biosurfactants over the chemical surfactants have also been discussed with emphasis on the latest findings and research performed worldwide. Moreover, the chemical and physical properties of different biosurfactants have been presented and different characterization techniques have been discussed. Overall, the review article covers the latest developments in biosurfactants along with their physico-chemical properties and applications in different fields, especially in pharmaceuticals and biotechnology.

Hydrocarbon bioremediation on Arctic shorelines: Historic perspective and roadway to the future

Climate change has become one of the greatest concerns of the past few decades. In particular, global warming is a growing threat to the Canadian high Arctic and other polar regions. By the middle of this century, an increase in the annual mean temperature of 1.8 °C-2.7 °C for the Canadian North is predicted. Rising temperatures lead to a significant decrease of the sea ice area covered in the Northwest Passage. As a consequence, a surge of maritime activity in that region increases the risk of hydrocarbon pollution due to accidental fuel spills. In this review, we focus on bioremediation approaches on Arctic shorelines. We summarize historical experimental spill studies conducted at Svalbard, Baffin Island, and the Kerguelen Archipelago, and review contemporary studies that used modern omics techniques in various environments. We discuss how omics approaches can facilitate our understanding of Arctic shoreline bioremediation and identify promising research areas that should be further explored. We conclude that specific environmental conditions strongly alter bioremediation outcomes in Arctic environments and future studies must therefore focus on correlating these diverse parameters with the efficacy of hydrocarbon biodegradation.

Characterization of a potent biosurfactant produced from Franconibacter sp. IITDAS19 and its application in enhanced oil recovery

Biosurfactants are surface-active molecules produced from microorganisms either on the cell surface or secreted extracellularly. Several biosurfactant producing microorganisms have been isolated to date, but they differ in their efficacy towards different types of hydrocarbons. Here, we report the isolation and characterization of a biosurfactant producing bacterium Franconibacter sp. IITDAS19 from crude oil contaminated soil. The biosurfactant was isolated, purified and characterized. It was identified as a glycolipid. It was found to be very stable at wide range of temperatures, pH and salt concentrations. It could reduce the surface tension of the water from 71 mN/m to 31 mN/m. IITDAS19 showed very high efficacy towards both aliphatic and aromatic hydrocarbons. It resulted in about 63% recovery of residual oil in a sand pack column. Our results suggested that the produced biosurfactant can be used for enhanced oil recovery. To our knowledge, this is the first report demonstrating the detailed characterization of a biosurfactant from Franconibacter spp.

Bioremediation of Petroleum Hydrocarbons in Seawater: Prospects of Using Lyophilized Native Hydrocarbon-Degrading Bacteria

This work aimed to develop a bioremediation product of lyophilized native bacteria to respond to marine oil spills. Three oil-degrading bacterial strains (two strains of Rhodococcus erythropolis and one Pseudomonas sp.), isolated from the NW Portuguese coast, were selected for lyophilization after biomass growth optimization (tested with alternative carbon sources). Results indicated that the bacterial strains remained viable after the lyophilization process, without losing their biodegradation potential. The biomass/petroleum ratio was optimized, and the bioremediation efficiency of the lyophilized bacterial consortium was tested in microcosms with natural seawater and petroleum. An acceleration of the natural oil degradation process was observed, with an increased abundance of oil-degraders after 24 h, an emulsion of the oil/water layer after 7 days, and an increased removal of total petroleum hydrocarbons (47%) after 15 days. This study provides an insight into the formulation and optimization of lyophilized bacterial agents for application in autochthonous oil bioremediation.

Bibliometric Analysis of Hydrocarbon Bioremediation in Cold Regions and a Review on Enhanced Soil Bioremediation

Simple Summary

Anthropogenic activities in cold regions require petroleum oils to support various purposes. With the increased demand of petroleum, accidental oil spills are generated during transportation or refuelling processes. Soil is one of the major victims in petroleum pollution, hence studies have been devoted to find solutions to remove these petroleum hydrocarbons. However, the remote and low-temperature conditions in cold regions hindered the implementation of physical and chemical removal treatments. On the other hand, biological treatments in general have been proposed as an innovative approach to attenuate these hydrocarbon pollutants in soils. To understand the relevancy of biological treatments for cold regions specifically, bibliometric analysis has been applied to systematically analyse studies focused on hydrocarbon removal treatment in a biological way. To expedite the understanding of this analysis, we have summarised these biological treatments and suggested other biological applications in the context of cold conditions.

Abstract

The increased usage of petroleum oils in cold regions has led to widespread oil pollutants in soils. The harsh environmental conditions in cold environments allow the persistence of these oil pollutants in soils for more than 20 years, raising adverse threats to the ecosystem. Microbial bioremediation was proposed and employed as a cost-effective tool to remediate petroleum hydrocarbons present in soils without significantly posing harmful side effects. However, the conventional hydrocarbon bioremediation requires a longer time to achieve the clean-up standard due to various environmental factors in cold regions. Recent biotechnological improvements using biostimulation and/or bioaugmentation strategies are reported and implemented to enhance the hydrocarbon removal efficiency under cold conditions. Thus, this review focuses on the enhanced bioremediation for hydrocarbon-polluted soils in cold regions, highlighting in situ and ex situ approaches and few potential enhancements via the exploitation of molecular and microbial technology in response to the cold condition. The bibliometric analysis of the hydrocarbon bioremediation research in cold regions is also presented.

Stress response in Rhodococcus strains

Rhodococci are bacteria which can survive under various extreme conditions, in the presence of toxic compounds, and in other hostile habitats. Their tolerance of unfavorable conditions is associated with the structure of their cell wall and their large array of enzymes, which degrade or detoxify harmful compounds. Their physiological and biotechnological properties, together with tools for their genetic manipulation, enable us to apply them in biotransformations, biodegradation and bioremediation. Many such biotechnological applications cause stresses that positively or negatively affect their efficiency. Whereas numerous reviews on rhodococci described their enzyme activities, the optimization of degradation or production processes, and corresponding technological solutions, only a few reviews discussed some specific effects of stresses on the physiology of rhodococci and biotechnological processes. This review aims to comprehensively describe individual stress responses in Rhodococcus strains, the interconnection of different types of stresses and their consequences for cell physiology. We examine here the responses to (1) environmental stresses (desiccation, heat, cold, osmotic and pH stress), (2) the presence of stress-inducing compounds (metals, organic compounds and antibiotics) in the environment (3) starvation and (4) stresses encountered during biotechnological applications. Adaptations of the cell envelope, the formation of multicellular structures and stresses induced by the interactions of hosts with pathogenic rhodococci are also included. The roles of sigma factors of RNA polymerase in the global regulation of stress responses in rhodococci are described as well. Although the review covers a large number of stressful conditions, our intention was to provide an overview of the selected stress responses and their possible connection to biotechnological processes, not an exhaustive survey of the scientific literature. The findings on stress responses summarized in this review and the demonstration of gaps in current knowledge may motivate researchers working to fill these gaps.

Optimization of an Autochthonous Bacterial Consortium Obtained from Beach Sediments for Bioremediation of Petroleum Hydrocarbons

Oil spill pollution remains a serious concern in marine environments and the development of effective oil bioremediation techniques are vital. This work is aimed at developing an autochthonous hydrocarbon-degrading consortium with bacterial strains with high potential for hydrocarbons degradation, optimizing first the growth conditions for the consortium, and then testing its hydrocarbon-degrading performance in microcosm bioremediation experiments. Bacterial strains, previously isolated from a sediment and cryopreserved in a georeferenced microbial bank, belonged to the genera Pseudomonas, Rhodococcus and Acinetobacter. Microcosms were assembled with natural seawater and petroleum, for testing: natural attenuation (NA); biostimulation (BS) (nutrients addition); bioaugmentation with inoculum pre-grown in petroleum (BA/P) and bioaugmentation with inoculum pre-grown in acetate (BA/A). After 15 days, a clear blending of petroleum with seawater was observed in BS, BA/P and BA/A but not in NA. Acetate was the best substrate for consortium growth. BA/A showed the highest hydrocarbons degradation (66%). All bacterial strains added as inoculum were recovered at the end of the experiment. This study provides an insight into the capacity of autochthonous communities to degrade hydrocarbons and on the use of alternative carbon sources for bacterial biomass growth for the development of bioremediation products to respond to oil spills.

Improved Biosurfactant Production by Enterobacter cloacae B14, Stability Studies, and its Antimicrobial Activity

This work aimed to optimize carbon and nitrogen sources for the growth of Enterobacter cloacae B14 and its biosurfactant (BS) production via One-Variable-At-a-Time (OVAT) method. The BS stability under a range of pH and temperatures was assessed. Antimicrobial activity against Gram-positive and Gram-negative pathogens was determined by the agar well diffusion method. The results showed that the optimum carbon and nitrogen sources for BS production were maltose and yeast extract, respectively, with a maximum BS yield of (39.8 ± 5.2) mg BS/g biomass. The highest emulsification activity (E24) was 79%, which is significantly higher than in the previous studies. We found that B14 BS can withstand a wide range of pH values from 2 to10. It could also function under a range of temperatures from 30-37°C. Thin Layer Chromatography (TLC) and Fourier Transform Infrared Spectrometry (FTIR) analysis confirmed that B14 BS is a glycolipid-like compound, which is rarely found in Enterobacter spp. Cell-free broth showed inhibition against various pathogens, preferable to Gram-positive ones. It had better antimicrobial activity against Bacillus subtilis than a commonly-used antibiotic, tetracycline. Furthermore, B14 broth could inhibit the growth of a tetracycline-resistant Serratia marcescens. Our results showed promising B14 BS applications not only for bioremediation but also for the production of antimicrobial products.

Production of Lipopeptide Biosurfactant by a Hydrocarbon-Degrading Antarctic Rhodococcus

Rhodococci are renowned for their great metabolic repertoire partly because of their numerous putative pathways for large number of specialized metabolites such as biosurfactant. Screening and genome-based assessment for the capacity to produce surface-active molecules was conducted on Rhodococcus sp. ADL36, a diesel-degrading Antarctic bacterium. The strain showed a positive bacterial adhesion to hydrocarbon (BATH) assay, drop collapse test, oil displacement activity, microplate assay, maximal emulsification index at 45% and ability to reduce water surface tension to < 30 mN/m. The evaluation of the cell-free supernatant demonstrated its high stability across the temperature, pH and salinity gradient although no correlation was found between the surface and emulsification activity. Based on the positive relationship between the assessment of macromolecules content and infrared analysis, the extracted biosurfactant synthesized was classified as a lipopeptide. Prediction of the secondary metabolites in the non-ribosomal peptide synthetase (NRPS) clusters suggested the likelihood of the surface-active lipopeptide production in the strain’s genomic data. This is the third report of surface-active lipopeptide producers from this phylotype and the first from the polar region. The lipopeptide synthesized by ADL36 has the prospect to be an Antarctic remediation tool while furnishing a distinctive natural product for biotechnological application and research.

Postbiotics-parabiotics: the new horizons in microbial biotherapy and functional foods

Probiotics have several health benefits by modulating gut microbiome; however, techno-functional limitations such as viability controls have hampered their full potential applications in the food and pharmaceutical sectors. Therefore, the focus is gradually shifting from viable probiotic bacteria towards non-viable paraprobiotics and/or probiotics derived biomolecules, so-called postbiotics. Paraprobiotics and postbiotics are the emerging concepts in the functional foods field because they impart an array of health-promoting properties. Although, these terms are not well defined, however, for time being these terms have been defined as here. The postbiotics are the complex mixture of metabolic products secreted by probiotics in cell-free supernatants such as enzymes, secreted proteins, short chain fatty acids, vitamins, secreted biosurfactants, amino acids, peptides, organic acids, etc. While, the paraprobiotics are the inactivated microbial cells of probiotics (intact or ruptured containing cell components such as peptidoglycans, teichoic acids, surface proteins, etc.) or crude cell extracts (i.e. with complex chemical composition)". However, in many instances postbiotics have been used for whole category of postbiotics and parabiotics. These elicit several advantages over probiotics like; (i) availability in their pure form, (ii) ease in production and storage, (iii) availability of production process for industrial-scale-up, (iv) specific mechanism of action, (v) better accessibility of Microbes Associated Molecular Pattern (MAMP) during recognition and interaction with Pattern Recognition Receptors (PRR) and (vi) more likely to trigger only the targeted responses by specific ligand-receptor interactions. The current review comprehensively summarizes and discussed various methodologies implied to extract, purify, and identification of paraprobiotic and postbiotic compounds and their potential health benefits.

Biodegradation of Total Petroleum Hydrocarbons in Soil: Isolation and Characterization of Bacterial Strains from Oil Contaminated Soil

In this study, we isolated seven strains (termed BY1–7) from polluted soil at an oil station and evaluated their abilities to degrade total petroleum hydrocarbons (TPHs). Following 16 rRNA sequence analysis, the strains were identified as belonging to the genera Bacillus, Acinetobacter, Sphingobium, Rhodococcus, and Pseudomonas, respectively. Growth characterization studies indicated that the optimal growth conditions for the majority of the strains was at 30 °C, with a pH value of approximately 7. Under these conditions, the strains showed a high TPH removal efficiency (50%) after incubation in beef extract peptone medium for seven days. Additionally, we investigated the effect of different growth media on growth impact factors that could potentially affect the strains’ biodegradation rates. Our results suggest a potential application for these strains to facilitate the biodegradation of TPH-contaminated soil.

Enhanced crude oil depletion by constructed bacterial consortium comprising bioemulsifier producer and petroleum hydrocarbon degraders

The aim of this work was to study the production of bioemulsifier by Rhodococcus erythropolis OSDS1, and the improvement of crude oil depletion efficiency using a consortium of petroleum hydrocarbon degraders and OSDS1. The results showed that R. erythropolis OSDS1 produced highly stable bioemulsifier under various salinity (0-35 g/L NaCl) and pH (5.0-9.0) conditions; more than 90% of the initial emulsification activity was retained after 168 h. Emulsification capacity of the bioemulsifier on different petroleum hydrocarbons was diesel > mineral oil/crude oil > gasoline. A mixed bacterial consortium combining OSDS1 and four other petroleum hydrocarbon degraders was constructed. GC-MS results revealed that the constructed consortium achieved 85.26% depletion efficiency of crude oil in 15 days, which was significantly higher than that of individual strains. During the process, alkane hydroxylase gene (alkB) was successfully amplified from the consortium, confirming presence of crude oil degrading enzymes.

Trehalose Lipid Biosurfactant Reduces Adhesion of Microbial Pathogens to Polystyrene and Silicone Surfaces: An Experimental and Computational Approach

Rhodococcus fascians BD8, isolated from Arctic soil, was found to produce biosurfactant when grown on n-hexadecane as the sole carbon source. The glycolipid product was identified as the trehalose lipid with a molecular mass of 848 g mol^-1. The purified biosurfactant reduced the surface tension of water from 72 to 34 mN m^-1. The critical micelle concentration of trehalose lipid was 0.140 mg mL^-1. To examine its potential for biomedical applications, the antimicrobial and antiadhesive activity of the biosurfactant was evaluated against several pathogenic microorganisms. Trehalose lipid showed antimicrobial activity against resistant pathogens. The largest antimicrobial activities of trehalose lipid were observed against Vibrio harveyi and Proteus vulgaris. The highest concentration tested (0.5 mg mL^-1) caused a partial (11-34%) inhibition of other Gram-positive and Gram-negative bacteria and 30% inhibition of Candida albicans growth. The trehalose lipid also showed significant antiadhesive properties against all of the tested microorganisms to polystyrene surface and silicone urethral catheters. The biosurfactant showed 95 and 70% antiadhesive activity against C. albicans and Escherichia coli, respectively. Finally, the role and application of trehalose lipid as an antiadhesive compound was investigated by the modification of the polystyrene and silicone surfaces. The intermolecular interaction energy calculations were performed for investigated complexes at the density functional level of theory. The results indicate that the presence of aromatic moieties can be substantial in the stabilization of trehalose lipid-surface complexes. The antimicrobial and antiadhesive activities of trehalose lipid make them promising alternatives to synthetic surfactants in a wide range of medical applications. Based on our findings, we propose that, because of its ability to inhibit microbial colonization of polystyrene and silicone surfaces, trehalose lipid can be used as a surface coating agent.