Batch experiments towards remediation of phenolic syntan using individual as well as co-culture of Bacillus cereus and Pseudomonas aeruginosa

Degradation of p-cresol in the presence of UV light driven in an integrated system containing photocatalytic and packed bed biofilm reactor

Integratingphotocatalysisand biodegradation has shown great potential in wastewater treatment technology. In this study, the degradation of p-cresol in water has been investigated through an integrated system comprising of photocatalytic and packed bed biofilm reactor (PBBR). In the photocatalytic reactor, the biodegradability index (BOD5/COD, BOD5/TOC) of the p-cresol solution was first shown to increase (from 0.098±0.023 to 0.59±0.089 for BOD5/COD and from 0.27±0.030 to 1.74±0.03 for BOD5/TOC). The pseudo-first-order rate constant (kap) was found to be 0.011 min-1. The % removal of the integrated system was found to be 98.43±1.31% at an initial concentration of 700 mg L-1 and residence time of 120 h, which was significantly higher than the PBBR operated alone (34.82±2.62%) under optimized conditions (pH 7.0 and T = 32±2 °C). Using an integrated approach, the efficient removal of p-cresol opens novel future perspectives for catalytic degradation using chemical oxidation.

Immobilized enzymes and cell systems: an approach to the removal of phenol and the challenges to incorporate nanoparticle-based technology

The presence of phenol in wastewater poses a risk to ecosystems and human health. The traditional processes to remove phenol from wastewater, although effective, have several drawbacks. The best alternative is the application of ecological biotechnology tools since they involve biological systems (enzymes and microorganisms) with moderate economic and environmental impact. However, these systems have a high sensitivity to environmental factors and high substrate concentrations that reduce their effectiveness in phenol removal. This can be overcome by immobilization-based technology to increase the performance of enzymes and bacteria. A key component to ensure successful immobilization is the material (polymeric matrices) used as support for the biological system. In addition, by incorporating magnetic nanoparticles into conventional immobilized systems, a low-cost process is achieved but, most importantly, the magnetically immobilized system can be recovered, recycled, and reused. In this review, we study the existing alternatives for treating wastewater with phenol, from physical and chemical to biological techniques. The latter focus on the immobilization of enzymes and microorganisms. The characteristics of the support materials that ensure the viability of the immobilization are compared. In addition, the challenges and opportunities that arise from incorporating magnetic nanoparticles in immobilized systems are addressed.