Comparisons of urea or ammonium on growth and fermentative metabolism of Saccharomyces cerevisiae in ethanol fermentation

Engineering the methylotrophic yeast Ogataea polymorpha for lactate production from methanol

Introduction: Lactate has gained increasing attention as a platform chemical, particularly for the production of the bioplastic poly-lactic acid (PLA). While current microbial lactate production processes primarily rely on the use of sugars as carbon sources, it is possible to envision a future where lactate can be produced from sustainable, non-food substrates. Methanol could be such a potential substrate, as it can be produced by (electro)chemical hydrogenation from CO₂. Methods: In this study, the use of the methylotrophic yeast Ogataea polymorpha as a host organism for lactate production from methanol was explored. To enable lactate production in Ogataea polymorpha, four different lactate dehydrogenases were expressed under the control of the methanol-inducible MOX promoter. The L-lactate dehydrogenase of Lactobacillus helveticus performed well in the yeast, and the lactate production of this engineered strain could additionally be improved by conducting methanol fed-batch experiments in shake flasks. Further, the impact of different nitrogen sources and the resulting pH levels on production was examined more closely. In order to increase methanol assimilation of the lactate-producing strain, an adaptive laboratory evolution experiment was performed. Results and Discussion: The growth rate of the lactate-producing strain on methanol was increased by 55%, while at the same time lactate production was preserved. The highest lactate titer of 3.8 g/L in this study was obtained by cultivating this evolved strain in a methanol fed-batch experiment in shake flasks with urea as nitrogen source. This study provides a proof of principle that Ogataea polymorpha is a suitable host organism for the production of lactate using methanol as carbon source. In addition, it offers guidance for the engineering of methylotrophic organisms that produce platform chemicals from CO₂-derived substrates. With reduced land use, this technology will promote the development of a sustainable industrial biotechnology in the future.

Endochitinase and Chitobiosidase Production by Marine Aeromonas caviae CHZ306: Establishment of Nitrogen Supplementation

Aeromonas caviae CHZ306, a marine-derived bacterium isolated from zooplankton, can use chitin (a polymer of a β-(1,4)-linked N-acetyl-D-glucosamine) as a carbon source. The chitin is hydrolyzed by chitinolytic enzymes, namely endochitinases and exochitinases (chitobiosidase and N-acetyl-glucosaminidase). Indeed, the chitinolytic pathway is initiated by the coexpression of the enzymes endochitinase (EnCh) and chitobiosidase (ChB); however, few studies, including biotechnological production of these enzymes, have been reported, although chitosaccharide are helpful in several industries, such as cosmetics. This study demonstrates the potential to maximize the simultaneous EnCh and ChB production by nitrogen supplementation on culture media. Twelve different nitrogen supplementation sources (inorganic and organic) previously analyzed in elemental composition (carbon and nitrogen) were tested and evaluated in the Erlenmeyer flask culture of A. caviae CHZ306 for EnCh and ChB expression. None of the nutrients inhibited bacterial growth, and the maximum activity in both EnCh and ChB was observed at 12 h, using corn-steep solids and peptone A. Corn-steep solids and peptone A were then combined at three ratios (1:1, 1:2, and 2:1) to maximize the production. The high activities for EnCh (30.1 U.L−1) and ChB (21.3 U.L−1) were obtained with 2:1 corn-steep solids and peptone A, corresponding to more than 5- and 3-fold enhancement, respectively, compared to the control condition.

Impact of Calcium and Nitrogen Addition on Bioethanol Production by S. cerevisiae Fermentation from Date By-Products: Physicochemical Characterization and Technical Design

Given crude oil prices and their environmental impacts, the use of sustainable renewable alternative energies such as biofuels is rapidly progressing in numerous countries. Among biofuels, bioethanol is a renewable and clean fuel that can be obtained from the fermentation of several raw agricultural materials, including date fruit. However, the low product yield, mainly due to the low-grade nutrient content, limits its use as a promising alternative biofuel. This current study investigated bioethanol production from date by-products in Saudi Arabia and examined the impact of calcium and nitrogen sources added at different concentrations (0 to 1 g/L) on the productivity and ethanol concentration using Saccharomyces cerevisiae. Yeast extracts and ammonium chloride (NH4Cl) were tested as nitrogen sources for bioethanol fermentation from date juice. Calcium chloride (CaCl2) and calcium carbonate (CaCO3) were evaluated as calcium sources for the same purpose mentioned above. The results showed that both calcium and nitrogen sources improved ethanol production efficiencies. The addition of calcium sources such as CaCl2 at 0.4 g/L resulted in maximum ethanol concentration (41.5 ± 0.85 g/L) and the highest productivity of 0.511 g/L/h. Thus, an increase of 31.3% compared to the control sample was acquired. Ammonium chloride was found to be the best nitrogen supplement among them. Indeed, supplementing the fermentation medium with 1 g/L NH4Cl gave an optimal ethanol concentration and productivity, reaching more than 65 g/L and 0.83 g/L/h, respectively. This is an increase of 106.6%. The functional group of ethanol (C2H5OH) for all the elaborated samples was confirmed by Fourier-transform infrared spectroscopy (FTIR) and NMR analyses. Moreover, the results confirmed the high quality and purity of the bioethanol products. Thus, the “Khodhari” date variety of low market value is a privileged substrate for industrial bioethanol production. For this reason, a proposed flow diagram of a designed plant for bioethanol industrialization is provided and detailed.