Bioreduction and bioremoval of hexavalent chromium by genetically engineered strains (Escherichia coli MT2A and Escherichia coli MT3)

Equilibrium, kinetic, and thermodynamic studies on the biosorption of lead by human metallothionein gene-cloned bacteria as a novel biosorbent

Heavy metals are the main pollutants in water and are an important global problem that threatens human health and ecosystems. In recent years, there has been an increasing interest in the use of genetically modified bacteria as an eco-friendly method to solve heavy metal pollution problems. The goal of this study was to generate genetically modified Escherichia coli expressing human metallothioneins (hMT2A and hMT3) and to determine their tolerance, bioaccumulation, and biosorption capacity to lead (Pb2+ ). Recombinant MT2A and MT3 strains expressing MT were successfully generated. Minimum inhibition concentrations (MIC) of Pb for MT2A and MT3 were found to be 1750 and 2000 mg L-1 , respectively. Pb2+ resistance and bioaccumulation capacity of MT3 were higher than MT2A. Therefore, only MT3 biosorbent was used in Pb2+ biosorption, and its efficiency was examined by performing experiments in a batch system. Pb2+ biosorption by MT3 was evaluated in terms of isotherms, kinetics, and thermodynamics. The results showed that Pb biosorption fits to the Langmuir isotherm model and the pseudo-first-order kinetic model, and the reaction is exothermic. The maximum Pb2+ capacity of the biosorbent was 50 mg Pb2+ g-1 . The potential of MT3 in Pb biosorption was characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM) analyses. The desorption study showed that the sorbent had up to 74% recovery and could be effectively used four times. These findings imply that this biosorbent can be applied as a promising, precise, and effective means of removing Pb2+ from contaminated waters. PRACTITIONER POINTS: In this study, the tolerance levels, bioaccumulation, and biosorption capacities of Pb in aqueous solutions were determined for the first time in recombinant MT2A and MT3 strains in which human MT2A and MT3 genes were cloned. The biosorbent of MT3, which was determined to be more effective in Pb bioaccumulation, was synthesized and used in Pb biosorption. The Pb biosorption mechanism of MT3 biosorbent was identified using isotherm modeling, kinetic modeling, and thermodynamic studies. The maximum Pb removal percentage capacity of the biosorbent was 90%, whereas the maximum biosorption capacity was up to 50 mg Pb2+ g-1 . These results indicated that MT3 biosorbent has a higher Pb biosorption capacity than existing recombinant biosorbents. MT3 biosorbent can be used as a promising and effective biosorbent for removing Pb from wastewater.

Ultrafast removal of toxic Cr(VI) by the marine bacterium Vibrio natriegens

The fastest-growing microbe Vibrio natriegens is an excellent platform for bioproduction processes. Until now, this marine bacterium has not been examined for bioremediation applications, where the production of substantial amounts of biomass would be beneficial. V. natriegens can perform extracellular electron transfer (EET) to Fe(III) via a single porin-cytochrome circuit conserved in Vibrionaceae. Electroactive microbes capable of EET to Fe(III) usually also reduce toxic metals such as carcinogenic Cr(VI), which is converted to Cr(III), thus decreasing its toxicity and mobility. Here, the performance of V. natriegens was explored for the bioremediation of Cr(VI). At a density of 100 mg/mL, V. natriegens removed 5-20 mg/L Cr(VI) within 30 s and 100 mg/L Cr(VI) within 10 min. In comparison, the model bacterium Escherichia coli grown to a comparable cell density removed Cr(VI) 36 times slower. To eliminate Cr(VI), V. natriegens had to be metabolically active, and functional outer-membrane c-type cytochromes were required. At the end of the Cr(VI) removal process, V. natriegens had reduced all of it into Cr(III) while adsorbing more than half of the metallic ions. These results demonstrate that V. natriegens, with its fast metabolism, is a viable option for the rapid treatment of aqueous pollution with Cr.

Biotransformation of protein-rich waste by Yarrowia lipolytica IPS21 to high-value products-amino acid supernatants

The yeast strain Yarrowia lipolytica IPS 21 was tested for its ability to degrade potentially toxic chrome-tanned leather shavings (CTLS) in a liquid environment. Biological and chemical parameters were monitored during a 48-h period of biotransformation of the protein-rich waste. CTLS was added at a concentration of 0.1-4% (wt/wt) to a modified YPG medium (15 g L-1 yeast extract and 5 g L-1 NaCl). Biodegradation and bioconversion were performed in a one-step process. It was found that the higher degradation rate depended on the activity of the proteases and the pH of the medium, but not on the initial inoculum ratio and the activity of the dehydrogenase. The highest efficiency of the process was obtained for 4% (wt/wt) CTLS on day 2 (degradation rate 58-67%, biomass production 2.11-2.20 g L-1, protease activity 312 U mg-1 protein, and pH 9.20). Our results showed that total chromium was probably not transported across the cytoplasmic membrane of Y. lipolytica IPS21 and that chromium (III) was not oxidized to chromium (VI). The phytotoxicity of selected amino acid supernatants [2.5% (vol/vol)] was tested after the bioconversion process. It was found that the supernatants had a stimulating effect on the plants tested. The root elongation was 29-28% higher than that of the reference samples. This result makes Y. lipolytica IPS21 a potential candidate for safely converting potentially toxic protein-rich wastes into valuable products without enzyme isolation, e.g., amino acid fertilizers. IMPORTANCE Enzyme technologies have the greatest practical relevance to environmental trends. Overcoming the barrier of the high cost of carbon substrates used for biotransformation is the main challenge of these methods. The huge potential of the use of extracellular proteases of Yarrowia species or amino acids in various industries indicates the need for the extension of basic research on waste as a carbon source for this yeast. The experiments demonstrated that it is possible to use Y. lipolytica IPS21 for bioconversion of chrome-tanned leather shavings (CTLS) in a single-step process and to produce high-value amino acid supernatant without having an isolated enzyme. In our study, we show the effect of 2.5% (vol/vol) CTLS supernatant obtained from Y. lipolytica IPS21 on the elongation of the root system of selected plants and provide information on the effect of environmental factors on the efficiency of the bioconversion and the migration of chromium.

Ability of Cupriavidus necator H16 to resist, bioremove, and accumulate some hazardous metal ions in water

Bacterial biomasses are suitable and inexpensive biosorbents for the removal of metal ions. The Gram-negative betaproteobacterium Cupriavidus necator H16 is found in soil and freshwater environments. In this study, C. necator H16 was used to remove chromium (Cr), arsenic (As), aluminum (Al), and cadmium (Cd) ions from water. Minimum inhibition concentration (MIC) values of C. necator to Cr, As, Al, and Cd were found as 76, 69, 341, and 275 mg/L, respectively. The highest rates of Cr, As, Al, and Cd bioremoval were 45, 60, 54, and 78%, respectively. pH levels between 6.0 and 8.0 and an average temperature of 30 °C were optimum for the most efficient bioremoval. Scanning electron microscopy (SEM) images of Cd-treated cells showed that the morphology of the cells was significantly impaired compared to the control. Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the Cd-treated cell walls also confirmed the presence of active groups. As a result, it can be said that C. necator H16 has a moderate bioremoval efficiency for Cr, As, and Al and a high bioremoval efficiency for Cd.

Effect of synthetic fatty liquor and neatsfoot oil as co-contaminants on the reduction of hexavalent chromium using Fusarium oxysporum and its kinetic study

The hexavalent chromium is one of the major carcinogenic components released during the tanning process and lots of work have been carried out on the reduction of hexavalent chromium via chemical and biological routes. Different fatty oils are also employed in the tanning process and have also been released as an effluent along with chromium. However, it is difficult to find a study on the reduction of chromium in the presence of other contaminant which would help to mimic the real-time complication of treating the tannery effluent. It is the first attempt on the reduction of hexavalent chromium in the presence of synthetic fatty liquor and neatsfoot oil using Fusarium oxysporum. The maximum percentage of chromium reduction was 73.62% and 60.28% in neatsfoot oil and synthetic fatty oil, respectively, for the initial chromium concentration of 25 mg/L. The biomass productivity was better with both neatsfoot oil and synthetic fatty oil, whereas the same has decreased with the presence of chromium. The reduction of chromium was found to follow the uncompetitive substrate inhibition kinetics than the general Michaelis-Menten kinetics. The kinetic parameters were calculated using particle swarm optimization algorithm, which were compared with the already reported data. The uncompetitive substrate inhibition kinetics was represented the experimental data in both the cases and the value of substrate inhibition constant was low in the case of neatsfoot oil compared with the synthetic fatty liquor.