Fast determination of sulfonamides and their acetylated metabolites from environmental water based on magnetic molecularly imprinted polymers

Strategy of Choosing Templates in Molecular Imprinting to Expand the Recognition Width for Family-Selectivity

The class-selective molecular-imprinted polymers (MIPs) have shown the recognition ability to multiple targeted molecules through using one or multiple templates. However, choosing the right templates, the core problem, still lacks a systemic guide and decision-making. In this work, we propose a strategy of selecting templates through expanding the recognition width for the improvement of class-selectivity. First, three families of genotoxic impurity (GTI) were selected as model objects, and the spatial size and binding energy of each GTI-monomer complexes were obtained and compared by computational simulation. The two indexes of energy width (W_E) and size width (W_L) were introduced to compare the similarity and differences on the two recognition factors, binding strength and spatial size, among these GTIs in each family. Through shortening the width to increase similarity on binding energy and size, the dual templates in the aromatic amines (AI) family and sulfonic acid esters (SI) family were successfully selected. Correspondingly, the prepared dual-template MIPs in the two GTI families can simultaneously recognize all the GTIs comparing with that of single template MIP, respectively. Meanwhile, through comparing the adsorption capacity of the selected template and its analogues in one GTI family, the recognition efficiency of the dual-template MIPs was higher than that of the single-template MIP. This indicates that though using the selected right templates, the higher class-selectivity and the larger recognition width can be realized. Thus, this work can solve the problem of blind template selection, and provide the useful theoretical guidance for designing family-selective molecular imprinting.

Determination of 35 sulfonamides in pork by magnetic molecularly imprinted polymer-based dispersive solid-phase extraction and ultra-performance liquid chromatography photodiode array method

BACKGROUND

Sulfonamide residues in foods of animal origin are potential risks to consumer health, so it is very important to inspect them. Among the previously reported instrumental methods, the best method can only be used to determine at most 22 sulfonamides. Thus, an instrumental method capable of determining more sulfonamide species is desirable.

RESULTS

In this study, sulfadoxine was used as a template to synthesize a type of magnetic molecularly imprinted polymer that could recognize 35 sulfonamides. After characterization, this composite was used to develop a dispersive solid-phase extraction method for extraction and purification of the 35 sulfonamides in pork, followed by determination using an ultra-performance liquid chromatography photodiode array method. This composite exhibited high adsorption capacity (11.01-19.21 μg mg^-1 ) and high recovery (>89.01%), and could be reused at least ten times. Due to the enrichment effect during sample preparation (enrichment factor 22-66), the limits of detection for determination of the 35 drugs in pork were in the range of 0.08-0.53 ng g^-1 . The detection results for some real pork samples were consistent with a liquid chromatographic-tandem mass spectrometric method. After comparison, the present method showed generally better performances than the previously reported sample preparation methods and instrumental methods for detection of sulfonamides.

CONCLUSION

The method developed in the present study could be used as a practical tool for routine detection of sulfonamide residues in pork samples. © 2022 Society of Chemical Industry.

Imprinting Technology for Effective Sorbent Fabrication: Current State-of-Art and Future Prospects

In the last 10 years, we have witnessed an extensive development of instrumental techniques in analytical methods for determination of various molecules and ions at very low concentrations. Nevertheless, the presence of interfering components of complex samples hampered the applicability of new analytical strategies. Thus, additional sample pre-treatment steps were proposed to overcome the problem. Solid sorbents were used for clean-up samples but insufficient selectivity of commercial materials limited their utility. Here, the application of molecularly imprinted polymers (MIPs) or ion-imprinted polymers (IIPs) in the separation processes have recently attracted attention due to their many advantages, such as high selectivity, robustness, and low costs of the fabrication process. Bulk or monoliths, microspheres and core-shell materials, magnetically susceptible and stir-bar imprinted materials are applicable to different modes of solid-phase extraction to determine target analytes and ions in a very complex environment such as blood, urine, soil, or food. The capability to perform a specific separation of enantiomers is a substantial advantage in clinical analysis. The ion-imprinted sorbents gained interest in trace analysis of pollutants in environmental samples. In this review, the current synthetic approaches for the preparation of MIPs and IIPs are comprehensively discussed together with a detailed characterization of respective materials. Furthermore, the use of sorbents in environmental, food, and biomedical analyses will be emphasized to point out current limits and highlight the future prospects for further development in the field.

Fate and risk assessment of sulfonamides and metabolites in urban groundwater

Antibiotics, such as sulfonamides (SAs), have recently raised concern as wastewater treatment plants (WWTPs) partly remove them, and thus, SAs continuously enter the aquifers. In this context, the aims of this work are to (1) investigate the temporal evolution of SAs and metabolites in an urban aquifer recharged by a polluted river; (2) identify the potential geochemical processes that might affect SAs in the river-groundwater interface and (3) evaluate the ecological and human health risk assessment of SAs. To this end, 14 SAs and 4 metabolites were analyzed in river and urban groundwater from the metropolitan area of Barcelona (NE, Spain) in three different sampling campaigns. These substances had a distinct behavior when river water, which is the main recharge source, infiltrates the aquifer. Mixing of the river water recharge into the aquifer drives several redox reactions such as aerobic respiration and denitrification. This reducing character of the aquifer seemed to favor the natural attenuation of some SAs as sulfamethoxazole, sulfapyridine, and sulfamethizole. However, most of the SAs detected were not likely to undergo degradation and adsorption because their concentrations were constant along groundwater flow path. In fact, the intensity of SAs adsorption is low as the retardation factors are close to 1 at average groundwater pH of 7.2 for most SAs. Finally, risk quotients (RQs) are used to evaluate the ecological and human health risks posed by single and mixture of SAs in river water and groundwater, respectively. Life-stage RQs of the SAs detected in groundwater for the 8 age intervals were low, indicating that SAs and their mixture do not pose any risk to human beings. Concerning the environmental risk assessment, SAs do not pose any risk for algae, fish and crustaceans as the RQs evaluated are further lower than 0.1.

Trends in sensitive detection and rapid removal of sulfonamides: A review

Sulfonamides in environmental water, food, and feed are a major concern for both aquatic ecosystems and public health, because they may lead to the health risk of drug resistance. Thus, numerous sensitive detection and rapid removal methodologies have been established. This review summarizes the sample preparation techniques and instrumental methods used for sensitive detection of sulfonamides. Additionally, adsorption and photocatalysis for the rapid removal of sulfonamides are also discussed. This review provides a comprehensive perspective on future sulfonamide analyses that have good performance, and on the basic methods for the rapid removal of sulfonamides.

Magnetic solid phase extraction using Fe3O4@β-cyclodextrin–lipid bilayers as adsorbents followed by GC-QTOF-MS for the analysis of nine pesticides

A rapid method for the analysis of trace organochlorine pesticides in a complex matrix.

Antibiotic Residue in the Aquatic Environment: Status in Africa

Information on the presence of antibiotics is sparse for all types of water in Africa, including groundwater, surface water, effluent of wastewater treatment plants (WWTPs) and municipal potable water. With the relatively high sales of different antibiotics to treat infectious diseases in the human population of Africa, the residual of the antibiotics is bound to be released through excretion via urine or fecal matter in parallel to the high sales. This article reviews the published analysis on the occurrence of antibiotics in the environment particularly in the aquatic environment in some countries in Africa. In general, sulfamethoxazole was the most commonly detected in Africa surface water (with eight reports from four countries) at a concentration range of 0.00027 – 39 μgL-1. Wastewater analysis is believed to give an early warning for preventing epidemics. Thus, we discuss the associated level of antibiotic resistance to some prevalent diseases in Africa whose aetiological agents can develop antibiotic resistance due to exposure to antibiotic residue in water. This is important because of rising population of immuno-deficient African residents ravaged by HIV/AIDS, poor nutrition and less efficient sanitation systems.

Simultaneous determination of sulfonamides and fluoroquinolones from environmental water based on magnetic double-template molecularly imprinting technique

In this work, a fast and selective method based on magnetic extraction is presented for the simultaneous extraction of sulfonamides (SAs) and fluoroquinolones (FQs), followed by liquid chromatography-tandem mass spectrometry detection. In this method, magnetic surface double-template molecularly imprinted polymers (MSdt-MIPs) with superparamagnetic property and high selectivity toward both SAs and FQs were synthesized and directly applied to the simultaneous extraction of SAs and FQs from environmental water as magnetic adsorbents. The extraction and enrichment procedures could be accomplished in one single step by stirring the mixture of MSdt-MIPs and water sample, and the MSdt-MIPs with adsorbed analytes were easily separated from the water sample by a magnet afterwards. The adsorption mechanism of MSdt-MIPs was investigated by employing the adsorption thermodynamic and kinetic studies, and the selectivity of the MSdt-MIPs toward target analytes was evaluated through the selectivity test. For validation of the proposed method, the matrix effect was evaluated and compared to that of the traditional SPE method. Excellent linearity (R > 0.9990) for both SAs and FQs were obtained in the concentration range of 20-2000 ng L^-1, and the limits of detection are in the range of 3.0-4.7 ng L^-1 for SAs while 4.1-6.1 ng L^-1 for FQs. Finally, the proposed method was successfully applied to the simultaneous determination of SAs and FQs in several environmental water samples.

Analysis of organochlorine pesticides in surface water of the Songhua River using magnetoliposomes as adsorbents coupled with GC-MS/MS detection

A simple and effective method based on magnetic separation has been developed for the extraction of organochlorine pesticides (OCPs) from river water samples using magnetoliposomes as adsorbents. This method avoided the time-consuming column passing process of loading large volume samples in traditional SPE through the rapid isolation of magnetoliposomes with an adscititious magnet. Lipid bilayers formed on the surface of Fe₃O₄ showed great adsorptive tendency towards analytes through hydrophobic interactions, and zwitterions headgroups endowed the outer surface of magnetoliposomes with hydrophilicity to improve the dispersing property of adsorbents in the sample matrix. The target analytes were detected by gas chromatography-tandem mass spectrometry, and the limits of detection obtained are in the range of 0.04-0.35ngL^-1. The relative standard deviations of intra- and inter-day are in the range of 2-5% and 4-7%, respectively. The proposed method was employed for analysis of six OCPs in the surface water samples from two cities along the Songhua River in different seasons. Compared with the traditional methods, the proposed method could reduce the consumption of the organic solvent and shorten the sample preparation time.

Identification of antibiotics in wastewater: current state of extraction protocol and future perspectives

The release and occurrence of antibiotics in the aquatic environment has generated increased attention in the past few decades. The residual antibiotic in wastewater is important in the selection for antimicrobial resistance among microorganisms and the possibility of forming toxic derivatives. This review presents an assessment of the advancement in methods for extraction of antibiotics with solid phase extraction and liquid-liquid extraction methods applied in different aquatic environmental media. These advanced methods do enhance specificity, and also exhibit high accuracy and recovery. The aim of this review is to assess the pros and cons of the methods of extraction towards identification of quinolones and sulphonamides as examples of relevant antibiotics in wastewater. The challenges associated with the improvements are also examined with a view of providing potential perspectives for better extraction and identification protocols in the near future. From the context of this review, magnetic molecular imprinted polymer is superior over the remaining extraction methods (with the availability of commercial templates and monomers), is based on less cumbersome extraction procedures, uses less solvent and has the advantage of its reusable magnetic phase.

Selective determination of sulfonamides from environmental water based on magnetic surface molecularly imprinting technology

In the study, a simple and selective method based on magnetic separation technology is presented for the extraction of sulfonamides (SAs) from environmental water, followed by liquid chromatography-tandem mass spectrometry. In this method, magnetic surface molecularly imprinted polymers (Fe₃O₄@SiO₂@MIPs) with super-paramagnetic property and high selectivity toward SAs were developed as magnetic adsorbents. The Fe₃O₄@SiO₂@MIPs were then applied to the selective extraction of SAs from environmental water. The extraction and enrichment were accomplished simultaneously in a single step by simply stirring the mixture of adsorbents and water samples. The Fe₃O₄@SiO₂@MIPs were characterized by scanning electron microscopy, Fourier-transform infrared spectrometry, and vibrating sample magnetometry. The adsorption thermodynamics and kinetics were employed to study the adsorption mechanism of the Fe₃O₄@SiO₂@MIPs. And the matrix effect of the method was evaluated. Calibration curves obtained by analyzing matrix-matched standards show excellent linear relationship (R = 0.9994-0.9999) in the concentration range of 10-1000 ng L^-1, and the limits of detection are in the range of 1.4-2.8 ng L^-1. The relative standard deviations of intra- and inter-day obtained are in the range of 2.8 to 7.8 and 3.1 to 7.9%, respectively. The proposed method was successfully applied to determine SAs in six environmental water samples, and SAs were detectable in four of them with the concentration from 10.5 to 120.2 ng L^-1.

Analysis of sulfonamides in soil, sediment, and sludge based on dynamic microwave-assisted micellar extraction

A green and high-throughput analytical method was described for the simultaneous determination of ten sulfonamides (SAs) from soil, sediment, and sludge in northeast China. None of potentially hazardous organic solvents was used in the whole sample preparation procedure, and the total preparation time of 15 samples was about 18 min. The limits of detection for the SAs were in the range of 0.42-0.68 ng g(-1). The intra-day and inter-day precisions, expressed by the relative standard deviation, were below 7 %. Under the optimum conditions, the recoveries of ten SAs were between 69.7 and 102.7 %. The proposed method was successfully applied to analyze the SAs residues in agricultural soils, river sediments, and sewage sludge. SAs were found at the levels of 1.40-2.31 ng g(-1) and 3.77-29.29 ng g(-1) in the sediments and sludge, respectively. The aging effect of spiked soil samples on the SAs recoveries was examined, and the results demonstrate that eight SAs could persist in five soils for 3 months. Compared with the traditional method, the proposed method could reduce the consumption of the organic solvent, shorten the sample preparation time, and increase the sample throughput.

Rapid preparation of molecularly imprinted polymers by microwave-assisted emulsion polymerization for the extraction of florfenicol in milk

In this study, we proposed a rapid and simple method for the preparation of molecularly imprinted polymers (MIPs) by emulsion polymerization. The polymerization process was accelerated by microwave heating, and the reaction time was greatly shortened. The obtained MIPs were spherical in shape and exhibited a uniform morphology. The MIPs with selectivity and high affinity to florfenicol were successfully applied as solid-phase extraction materials to extract and clean up the florfenicol in milk, followed by liquid chromatography-tandem mass spectrometry (LC-MS) analysis. The parameters affecting the performance of extraction and LC-MS analysis were evaluated. The detection limit of the method was 4.1ngmL(-1). The relative standard deviations of intra- and inter-day were in the range of 3.5-4.7% and 3.9-7.5%, respectively.

Application of molecularly imprinted polymers in wastewater treatment: a review

Molecularly imprinted polymers are synthetic polymers possessing specific cavities designed for target molecules. They are prepared by copolymerization of a cross-linking agent with the complex formed from a template and monomers that have functional groups specifically interacting with the template through covalent or noncovalent bonds. Subsequent removal of the imprint template leaves specific cavities whose shape, size, and functional groups are complementary to the template molecule. Because of their predetermined selectivity, molecularly imprinted polymers (MIPs) can be used as ideal materials in wastewater treatment. Especially, MIP-based composites offer a wide range of potentialities in wastewater treatment. This paper reviews the latest applications of MIPs in wastewater treatment, highlights the development of MIP-based composites in wastewater, and offers suggestions for future success in the field of MIPs.