Extraction and application of starch-based coagulants from sago trunk for semi-aerobic landfill leachate treatment

Instantaneous and reversible flocculation of Scenedesmus via Chitosan and Xanthan Gum complexation

An instantaneous and reversible flocculation method for Scenedesmus harvesting was developed, based on the complexation of Chitosan (CTS) and Xanthan Gum (XG). Under rapid stirring, Scenedesmus cells formed centimeter-sized flocs within 20 s using binary flocculants of 4 mg/L CTS and 16 mg/L XG. These flocs exhibited a remarkable harvest efficiency exceeding 95 % when filtered through 500-μm-pore-sized sieves. Furthermore, the flocs could be completely disintegrated by using alkaline or NaCl solutions (pH > 11 or NaCl concentration > 1.5 mol/L). Adjusting pH allowed recovery of 50 % CTS and 75 % XG, resulting in microalgae biomass with lower flocculant content and reducing reagent costs. Electrostatic interaction of -COO- of XG and -NH3+ of CTS deduced the formation of polyelectrolyte complexes (PECs), which shrink and wrap the coexisting algal cells to form the flocs under stirring. CTS and XG complexation was instantaneous and reversible, explaining quick flocculation and disintegration.

Application of laminarin as a novel coagulant aid to improve coagulation-ultrafiltration efficiency

Polyacrylamide (PAM) is the most commonly used coagulant aid in coagulation-ultrafiltration (C-UF) systems; however, its hydrolyzed monomer is harmful to the human nervous system. In this study, laminarin (LA), was extracted from Laminaria japonica and used as a novel coagulant aid to improve coagulation efficiency and reduce membrane fouling during the C-UF process. Optimal LA usage conditions were systematically examined and compared with those of PAM to evaluate their potential for industrial applications. The results revealed that coagulation efficiency could be enhanced by 15-35% with moderate LA addition, which exhibited comparable aid effects to PAM. LA exhibited the highest coagulation aid effect at pH 8-9, and under this condition, turbidity and natural organic matter (NOM) removal achieved 82% and 54%, respectively. Compared with a one-time LA dosing strategy, the pollutant removal capacity of batch dosing was superior. Even in lower water temperatures (5-15 °C), coagulation efficiency was still satisfied, which exhibited a good practical application perspective. The coagulation aid role of LA should be attributed to its long-chain molecular structure, which enhances the bridging role between micro flocs and assists floc growth, thus facilitating the formation of large flocs. In addition, LA adsorption on floc surface was conducive to the direct electrostatic repulsion effect of electronegative membrane, which resulted in a more porous cake layer and higher membrane flux. Therefore, LA exhibits excellent application potential for eliminating NOM while simultaneously reducing membrane fouling through the C-UF process.

Investigation of critical properties of Cassava (Manihot esculenta) peel and bagasse as starch-rich fibrous agro-industrial wastes for biodegradable food packaging

Cassava peel and bagasse are fibrous, starch-rich agro-industrial wastes, which cause severe environmental impacts upon their disposal. However, these can be raw materials for biodegradable food packaging. In this study, their morphological, chemical, thermal properties, crystalline phases, and chemical compositions were investigated, and potential utilisation as alternative biodegradable food packaging matrices has been assessed. Residual starches in cassava peel and bagasse were morphologically similar with that of commercial cassava starch, whereas potassium (8570 ± 56 mg/kg), and calcium (5300 ± 147 mg/kg) were highly abounded in peel and bagasse respectively. The major crystalline phase, α-amylose dihydrate, for cassava peel (97.1 (2) %) and bagasse (99.0 (3) %) point towards the presence of starch. Calcium and silicon reported to be in crystalline phases respectively, in the forms of quartz and whewellite. These beneficial characteristics suggested the potential valorisation of cassava peel and bagasse with special interest as matrices for biodegradable food packaging.

What compound inside biocoagulants/bioflocculants is contributing the most to the coagulation and flocculation processes?

Biocoagulants and bioflocculants are alternative items that can be used to substitute the utilization of common-chemical coagulants and flocculants. Biocoagulants/bioflocculants can be extracted from animals, microorganisms, and plants. Moreover, biocoagulants/bioflocculants have specific characteristics that contribute to the coagulation and flocculation processes. The active compounds inside biocoagulants/bioflocculants vary and correspond to the specific working mechanisms, including charge neutralization, sweep coagulation, adsorption, bridging, and patch flocculation. This review paper summarizes the characteristics of biocoagulants/bioflocculants from different sources and its performance in treating various pollutants. Furthermore, this paper discusses the most contributing compounds and functional groups of biocoagulants/bioflocculants that can be related to their working mechanisms. Several functional groups and compounds in biocoagulants/bioflocculants are highlighted in this review article, as well as the correlation between the highlighted groups/compounds to the aforementioned coagulation-flocculation mechanisms. In addition, current knowledge gaps in the study of biocoagulants/bioflocculants and future approaches that may serve as research directions are also emphasized. This review article is expected to shed information on the characteristics of biocoagulants/bioflocculants, which may then become a focus in the optimization to obtain higher performance in future application of coagulation-flocculation processes.

Synthesis of natural starch from Elaeis guineensis trunk biomass applying bisulphite steeping method: Optimization by RSM

A massive quantity of Elaeis guineensis (oil palm) trunk biomass, containing a significant amount of natural starch, is available in Malaysia as biowaste because of annual replantation. The efficient extraction of this starch (carbohydrate polymer) would be worthwhile concerning the environmental sustainability and economy through conversion to bioresources. This study investigated the effectiveness of the bisulfite steeping method for starch synthesis from oil palm trunk (OPT) biowaste. The central composite design (CCD) of Design-Expert software executed an experimental model design, data analysis, evaluated the impacts of process variables and their interaction through response surface methodology to optimize the bisulfite steeping method for starch synthesis. The developed quadratic models for four factors (strength of sodium bisulfite solution, steeping hour, mixing ratio with the bisulfite solution, and ultrapure water) and one response (%Yield) demonstrated that a significant starch yield (13.54%) is achievable employing 0.74% bisulfite solution, 5.6 steeping hours, for 1.6 and 0.6 mixing ratio with the bisulfite solution and ultrapure water respectively. Experimental outcomes were consistent with the predicted model, which eventually sustains the significance of this method. Malvern Zetasizer test revealed a bimodal granular distribution for starch, with 7.15 µm of hydrodynamic size. Starch morphology was determined by scanning electron microscopy. X-ray diffraction investigation exhibits an A-type model, specifying persistent characteristics, while FTIR confirms the presence of hydroxyl, carboxylic, and phenolic groups like other cereal starches.Implications: Malaysia is the 2nd largest palm oil exporter in the world. About 110 million tons of palm oil trunk (OPT) biomass is available annually during replanting activities. Modification of bio-wastes into a beneficial form (only 22% presently) like starch extraction would ensure potential reuse as a natural coagulant for wastewater and leachate treatment, food source, adhesives towards boosting the country's economy by sustainable waste management. The current study achieved better starch yield (13.54%) than previous, from the OPT biomass through the novel bisulfite steeping method. Therefore, this method will ascertain the effective implication of numerous economic activities.

The Potential Use of Nephelium lappaceum Seed as Coagulant-Coagulant Aid in the Treatment of Semi-Aerobic Landfill Leachate

Chemical-based coagulants and flocculants are commonly used in the coagulation-flocculation process. However, the drawbacks of using these chemical materials have triggered researchers to find natural materials to substitute or reduce the number of chemical-based coagulants and flocculants. This study examines the potential application of Nephelium lappaceum seeds as a natural coagulant-coagulant aid with Tin (IV) chloride (SnCl4) in eliminating suspended solids (SS), colour, and chemical oxygen demand (COD) from landfill leachate. Results showed that the efficiency of Nephelium lappaceum was low when used as the main coagulant in the standard jar test. When SnCl4 was applied as a single coagulant, as much as 98.4% of SS, 96.8% of colour and 82.0% of COD was eliminated at an optimal dose of 10.5 g/L and pH 7. The higher removal efficiency of colour (88.8%) was obtained when 8.40 g/L of SnCl4 was applied with a support of 3 g/L of Nephelium lappaceum. When SnCl4 was utilised as a coagulant, and Nephelium lappaceum seed was used as a flocculant, the removal of pollutants generally improved. Overall, this research showed that Nephelium lappaceum seed is a viable natural alternative for treating landfill leachate as a coagulant aid.

Starch engineered with Moringa oleifera seeds protein crosslinked Fe3O4: A synthesis and flocculation studies

This study aimed to utilize cationic protein extracted from the Moringa oleifera seed in the fabrication of cationic starch crosslinked with magnetic nanoparticles (MagCS). Important synthesis parameters include starch to cationic protein volume ratio, magnetic nanoparticles mass fraction, reaction and crosslinking time, reaction and crosslinking temperature and crosslinker concentration. At optimum synthesis conditions, MagCS yield a 38.55% amide content, 2.46 degree of substitution, 1.1 mmol/g charge density and 78.6% crosslinking, which are much higher compared to other starch derivatives. A series of characterization analyses such as Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, elemental analysis and vibrating sample magnetometer concluded that MagCS was embedded with amide group, has high crystallinity structure, is thermally stable and shows a promising magnetic characteristic. Based on the synthesis parameters and characterization studies, the synthesis mechanism of MagCS was also postulated. The flocculation performance of MagCS was successfully assessed for the treatment of palm oil mill effluent. At optimum dosage, initial pH and settling time of 1.0 g/L, 9.0 and 15 min, the MagCS flocculant was able to remove 90.48, 83.95 and 58.19% of turbidity, color and chemical oxygen demand, respectively. This study provides an alternative eco-friendly materials in the wastewater treatment application.

Optimization of the humic acid separation and coagulation with natural starch by RSM for the removal of COD and colour from stabilized leachate

The removal of concentrated colour (around 5039 Pt-Co) and chemical oxygen demand (COD; around 4142 mg L^-1) from matured landfill leachate through a novel combination of humic acid extraction and coagulation with natural oil palm trunk starch (OPTS) was investigated in this study. Central composite design from response surface methodology of Design Expert-10 software executed the experimental design to correlate experimental factors with desired responses. Analysis of variance developed the quadratic model for four factors (e.g. coagulant dosage, slow mixing speed and time and centrifugation duration) and two responses (% removal of colour, COD). The model confirmed the highest colour (84.96%) and COD (48.84%) removal with a desirability function of 0.836 at the optimum condition of 1.68 g L^-1 coagulant dose, 19.11 rpm slow mixing speed, 16.43 minutes for mixing time and 35.75 minutes for centrifugation duration. Better results of correlation coefficient (R² = 0.98 and 0.96) and predicted R² (0.94 and 0.84) indicates the model significance. Electron microscopic images display the amalgamation of flocs through bridging. Fourier transforms infrared spectra confirmed the existence of selected organic groups in OPTS, which eventually signifies the applied method.

Plant-Based Tacca leontopetaloides Biopolymer Flocculant (TBPF) Produced High Removal of Turbidity, TSS, and Color for Leachate Treatment

Wastewater treatment is crucial to ensure a sustainable supply of clean water, especially for human use. Natural flocculants can overcome the disadvantages of chemical flocculants in wastewater treatment. This study proposes a new natural-based flocculant from the Tacca leontopetaloides plant for leachate treatment. The plant tuber was processed through gelatinization to produce Tacca leontopetaloides biopolymer flocculant (TBPF). The characterization of TBPF for flocculant properties was investigated, and the performance of TBPF on leachate treatment using a standard jar test procedure was examined at different pH values of leachate and TBPF dosages. The characteristics of TBPF in terms of amylose/amylopectin fraction, viscosity, and zeta potential were 26:74, 0.037–0.04 Pa·s, and −13.14 mV, respectively. The presence of –COOH and –OH structure in TBPF indicates the flocculant properties. TBPF reduced the turbidity, total suspended solids (TSS), and color from 218 NTU, 214 mg/L, 14201 PtCo to 45.8–54.5 NTU, 19.3–19.9 mg/L, and 852–994 PtCo, respectively, using 240 mg/L of TBPF at pH 3. These results show a high potential of the new plant-based TBPF for leachate treatment and water industry applications.

Optimization and Analysis of Zeolite Augmented Electrocoagulation Process in the Reduction of High-Strength Ammonia in Saline Landfill Leachate

This work examined the behavior of a novel zeolite augmented on the electrocoagulation process (ZAEP) using an aluminum electrode in the removal of high-strength concentration ammonia (3471 mg/L) from landfill leachate which was saline (15.36 ppt) in nature. For this, a response surfaces methodology (RSM) through central composite designs (CCD) was used to optimize the capability of the treatment process. Design-Expert software (version 11.0.3) was used to evaluate the influences of significant variables such as zeolite dosage (100–120 g), current density (540–660 A/m2), electrolysis duration (55–65 min), and initial pH (8–10) as well as the percentage removal of ammonia. It is noted that the maximum reduction of ammonia was up to 71%, which estimated the optimum working conditions for the treatment process as follows: zeolite dosage of 105 g/L, the current density of 600 A/m2, electrolysis duration of 60 min, and pH 8.20. Furthermore, the regression model indicated a strong relationship between the predicted values and the actual experimental results with a high R2 of 0.9871. These results provide evidence of the ability of the ZAEP treatment as a viable alternative in removing high-strength landfill leachate of adequate salinity without the use of any supporting electrolyte.