Enhanced photochemical decomposition of environmentally persistent perfluorooctanoate by coexisting ferric ion and oxalate

Per- and polyfluoroalkyl substances contamination of drinking water sources in Africa: Pollution sources and possible treatment methods

Despite the detection of poly- and perfluorinated alkyl substances (PFAS) in the water system in Africa, the effort towards mitigating PFAS in water in Africa needs to be better understood. Therefore, this review evaluated the contamination status and mitigation methods for handling PFAS-contaminated water systems in Africa. The findings revealed the presence of PFAS in wastewater treatment plant (WWTP) effluents, surface water and commercially available bottled and tap water in African countries. The concentration of PFAS in drinking water sources reviewed ranged from < limits of quantification to 778 ng L-1. The sources of PFAS in water systems in Africa are linked to uncontrolled importation of PFAS-containing products, WWTP effluents and inappropriate disposal of PFAS-containing materials. The information on treatment methods for PFAS-contaminated water systems is scanty. Unfortunately, the treatment method is challenged by poor water research infrastructure and facilities, lack of awareness, poor research funding and weak legislation; however, adsorption and membrane technology seem favourable for removing PFAS from water systems in Africa. It is essential to focus on monitoring and assessing drinking water quality in Africa to reduce the disease burden that this may cause. Most African countries' currently implemented water treatment facilities cannot efficiently remove PFAS during treatment. Therefore, governments in Africa need to fund more research to develop an efficient water treatment technique that is sustainable in Africa.

Degradation and Defluorination of Per- and Polyfluoroalkyl Substances by Direct Photolysis at 222 nm

The susceptibility of 19 representative per- and polyfluoroalkyl substances (PFAS) to direct photolysis and defluorination under far-UVC 222 nm irradiation was investigated. Enhanced photolysis occurred for perfluorocarboxylic acids (PFCAs), fluorotelomer unsaturated carboxylic acids (FTUCAs), and GenX, compared to that at conventional 254 nm irradiation on a similar fluence basis, while other PFAS showed minimal decay. For degradable PFAS, up to 81% of parent compound decay (photolysis rate constant (k222 nm) = 8.19-34.76 L·Einstein-1; quantum yield (Φ222 nm) = 0.031-0.158) and up to 31% of defluorination were achieved within 4 h, and the major transformation products were shorter-chain PFCAs. Solution pH, dissolved oxygen, carbonate, phosphate, chloride, and humic acids had mild impacts, while nitrate significantly affected PFAS photolysis/defluorination at 222 nm. Decarboxylation is a crucial step of photolytic decay. The slower degradation of short-chain PFCAs than long-chain ones is related to molar absorptivity and may also be influenced by chain-length dependent structural factors, such as differences in pKa, conformation, and perfluoroalkyl radical stability. Meanwhile, theoretical calculations indicated that the widely proposed HF elimination from the alcohol intermediate (CnF2n+1OH) of PFCA is an unlikely degradation pathway due to high activation barriers. These new findings are useful for further development of far-UVC technology for PFAS in water treatment.

Adsorption of perfluorooctanoic acid from water by pH-modulated Brönsted acid and base sites in mesoporous hafnium oxide ceramics

Per- and polyfluoroalkyl substances (PFAS) are increasingly appearing in drinking water sources globally. Our work focuses specifically on the adsorption of the legacy perfluorooctanoic acid (PFOA) using mesoporous hafnium oxide (MHO) ceramic synthesized via a sol-gel process. Experiments were performed at varying pH to determine the effect of surface charge on adsorption capacity of PFOA by MHO, and to postulate adsorption behavior. At pH 2.3, the adsorption capacity of PFOA on MHO was 20.9 mg/g, whereas at a higher pH of 6.3, it was much lower at 9.2 mg/g. This was due to increased coulombic attractions at lower pH between the positively charged conjugate acid active sites on MHO surface and negatively charged deprotonated PFOA anion in solution. After adsorption, the solid MHO was regenerated via calcination, reducing the amount of toxic solid waste to be disposed since the adsorbent is regenerated, and the PFOA is completely removed.

•

The adsorption capacity of PFOA by MHO was determined to be 20.9 mg/g at pH 2.3

•

As pH increased, the adsorption capacity of MHO decreased due to Coulombic repulsions

•

MHO could be regenerated via calcination to limit the amount of toxic waste produced

Photocatalytically reductive defluorination of perfluorooctanoic acid (PFOA) using Pt/La2Ti2O7 nanoplates: Experimental and DFT assessment

To enable efficient degradation of perfluorooctanoic acid (PFOA), we prepared and investigated a nanosheet photocatalyst (Pt/La₂Ti₂O₇). Doping platinum nanoparticles on La₂Ti₂O₇ varied the band structure and improved the photocatalytic activity due to the enhanced charge separation. Methanol as the electron donor and sacrificial reagent significantly promoted the photocatalytically reductive degradation of PFOA that reduced by 40% within 180 min under UV₂₅₄ irradiation (1 mW∙cm²). The density functional theory calculations were used to analyze the effects of Pt doping and band structures on interfacial electron transfer and degradation pathways. As opposed to photocatalytic oxidation, this UV/Pt/La₂Ti₂O₇/CH₃OH photocatalysis could abstract electrons from methanol and convert to free reactive radicals and photo-generated electrons to reductively defluorinate PFOA and potentially other polyhalogenated or perhalogenated organic compounds.

Persistent Free Radicals from Low-Molecular-Weight Organic Compounds Enhance Cross-Coupling Reactions and Toxicity of Anthracene on Amorphous Silica Surfaces under Light

Polycyclic aromatic hydrocarbon (PAH) contamination has raised great environmental concerns, while the effects of low-molecular-weight organic compounds (LMWOCs) on PAH photodegradation at amorphous silica (AS)/air interfaces have been largely ignored. In this study, the phototransformation of anthracene (ANT) at amorphous silica (AS)/air interfaces was investigated with the addition of LMWOCs. ANT removal was attributed to ^•OH attacking and the energy transfer process via ³ANT*. Light irradiation induced the fractured ≡SiO^• or ≡Si^• generation on AS surfaces, which could react with absorbed H₂O and O₂ to generate ^•OH and further yield a series of hydroxylated products of ANT. The presence of citric acid and oxalic acid improved ^•OH generation and enhanced ANT removal by 1.0- and 2.2-fold, respectively. For comparison, the presence of catechol and hydroquinone significantly decreased ANT removal and produced coupling products. The results of density functional theory calculations suggest that persistent free radicals (PFRs) on AS surfaces from catechol or hydroquinone after ^•OH attacking prefer to cross-couple with ANT via C-C bonding rather than self-couple. Dianthrone and cross-coupling products might possess higher ecotoxicity, while hydroxylated products were less ecotoxic than their parent compounds based on Ecological Structure Activity Relationships (ECOSAR) estimation. The results of this study revealed the potential ecotoxicity of PAH-adsorbed particulates coexisting with LMWOCs and also provided a new insight into PAH transformation through PFR pathways.

Photo enhanced degradation of polyfluoroalkyl and perfluoroalkyl substances

The increase in the presence of highly recalcitrant poly- and per- fluoroalkyl substances (PFAS) in the environment, plant tissues and animals continues to pose serious health concerns. Several treatment methods such as physical, biological and chemical processes have been explored to deal with these compounds. Current trends have shown that the destructive treatment processes, which offer degradation and mineralization of PFASs, are the most desirable process among researchers and policy makers. This article, therefore, reviews the degradation and defluorination processes, their efficiencies and the degradation mechanism of photon-based processes. It shows that high degradation and defluorination efficiency of PFASs could be achieved by photon driven processes such as photolysis, photochemical, photocatalysis and photoreduction. The efficiency of these processes is greatly influenced by the nature of light and the reactive radical generated in the system. The limitation of these processes, however, include the long reaction time required and the use of anoxic reaction conditions, which are not obtainable at ambient conditions.

Enhanced degradation of perfluorooctanoic acid by a genome shuffling-modified Pseudomonas parafulva YAB-1

Perfluorooctanoic acid (PFOA) as an emerging persistent organic pollutant is hard to be degraded by conventional methods because of its stable physical and chemical properties. Microbial transformation is an attractive remediation approach to prevent and clean up PFOA contamination. To date, several strains of wild microbes have been reported to have limited capacity to degrade PFOA, selection of superior strains degrading PFOA become urgently necessary. Here, we report the application of genome shuffling to improve the PFOA-degrading bacterium Pseudomonas Parafulva YAB-1. The initial mutant populations of strain YAB1 were generated by nitrosoguanidine and ultraviolet irradiation mutagenesis respectively, resulting in mutants YM-9 and YM-19 with slightly improved PFOA-degrading ability. YM-9 and YM-19 were used as the starting strains for three rounds of recursive protoplast fusion. The positive mutants were screened on inorganic salt medium plates containing different concentrations of PFOA and selected based on their PFOA degradability in shake-flask fermentation test. The best performing recombinant F3-52 was isolated after three rounds of genome shuffling. In batch fermentation, the PFOA degradation rate of mutant F3-52 was up to 58.6%, which was 1.8-fold higher than that of the parent strain YAB1, and 1.6-fold higher than the initial mutants YM-9 and YM-19. Pass-generation test indicated that the heredity character of F3-52 was stable. The results demonstrated that genome shuffling was an efficient method for improving PFOA degradation of Pseudomonas Parafulva YAB1. The bred mutant F3-52 with 58.6% PFOA-degrading rate could be used for the environmental control of PFOA pollutant.

A rationally designed perfluorinated host for the extraction of PFOA from water utilising non-covalent interactions

Three hosts for the encapsulation of perfluorooctanoic acid have been synthesized. The host:guest complexes have been characterized by multinuclear NMR spectroscopy in solution and the solid state.