Adsorptive removal of naphthalene induced by structurally different Gemini surfactants in a soil-water system

Remediation of heavily PAHs-contaminated soil with high mineral content from a coking plant using surfactant-enhanced soil washing

This study investigated the effectiveness of various surfactants at different concentrations in removing high concentrations of polycyclic aromatic hydrocarbons (PAHs) from soil with high mineral content, focusing on the impact of surfactant treatment on the mobility of the residual PAHs in soil. The results revealed that the cationic surfactant (CTMAB) inhibited removal of PAHs in the whole tested concentration range of 0.1-8 g/L. In contrast, the non-ionic and anionic surfactants (Triton X-100 and SDBS) significantly enhanced removal of PAHs as their amendment concentrations reached 2 g/L and above. Triton X-100 exhibited steadily increased efficacy with increasing amendment concentrations and maintained favorable solubilization capability when continuously amended, making it the preferable choice for remediating PAHs-contaminated soil. Surfactant and water washing processes altered soil physicochemical properties by removing some clay minerals (e.g., faujasite) and organic matter that can bind or sequester PAHs, potentially increasing their extractability and bioavailability in the washed soil, thereby posing higher ecological risks compared to the original one. Although soil washing decreased retention of the remaining PAHs in soil, it did not significantly impact PAHs release from soil by flowing water. These findings provide insights into the long-term effectiveness and ecological impacts of surfactant-enhanced washing as a potential remediation technique for PAHs-contaminated soil.

Immobilization of W(VI) and/or Cr(VI) in soil treated with montmorillonite modified by a gemini surfactant and tetrachloroferrate (FeCl4-)

The coexistence of highly toxic chromium (Cr) and the emerging contaminant tungsten (W) in the soil adjacent to W mining areas is identified. Immobilization of W and/or Cr is vital for the safe utilization of contaminated soil. In this study, the cationic gemini surfactant (butane-1,4-bis(dodecyl dimethyl ammonium bromide)) and tetrachloroferrate (FeCl₄^-)-modified montmorillonite (FeOMt) was applied to investigate the retention performance of W and/or Cr in the soil. Regardless of the initially spiked amount of WO₄^2- and/or CrO₄^2-, the W and/or Cr leached in soil solution was rapidly immobilized within 5 min. The immobilization rates of W and/or Cr in the single and binary soil systems were stably maintained against the variations in pH and coexisting anion. FeOMt showed more favorable performance in the retention of W and/or Cr with respect to the precursors (i.e., the original Mt and surfactant-modified Mt) and efficiently inhibited the phytotoxicity and bioaccumulation of W and/or Cr in mung beans. Due to the ion exchange, complexation, reduction, and flocculation, the addition of FeOMt transformed W and/or Cr from exchangeable/carbonate species to reducible/oxidizable fractions, reducing the environmental risk. FeCl₄^- complex, as a byproduct of the steel pickling process in industry, plays the pivotal role in the efficient retention of W and Cr. Based on the facile synthesis procedure and the efficient performance, the use of FeOMt for the amendment of W- and/or Cr-contaminated soil is feasible and promising.

Desorption process and morphological analysis of real polycyclic aromatic hydrocarbons contaminated soil by the heterogemini surfactant and its mixed systems

Surfactant-enhanced remediation (SER) is an efficient and low-cost technology for polycyclic aromatic hydrocarbons (PAHs) contaminated sites. This study assessed the desorption processes and effects of Heterogemini surfactant (Dodecyldimethylammonium bromide/tetradecyldimethylammonium bromide, DBTB), two traditional surfactants (Hexadecyl trimethyl ammonium bromide, CTAB; Sorbitan monolaurate, Span 20) and their mixed systems on the real PAHs-contaminated soil from an abandoned coking plant, as well they were analyzed micro morphologically. DBTB had greater desorption capability for PAHs and favorable interaction with the traditional surfactants confirmed by reaction parameters β^m and Gibbs. Whether for total PAHs (TPAHs) or different molecular weight PAHs, the mixed system Span 20/DBTB had larger molar solubilization ratio (MSR) and partition coefficient (K_m) than CTAB/DBTB, the highest desorption rate for TPAHs reaching 68.83%. Additionally, microscopic morphology showed micelles of Span 20/DBTB were more dispersed and formed strings easily, explaining its good desorption capability. What resulted demonstrated the feasibility of DBTB, a novel Heterogemini surfactant, and its mixed systems remediating PAHs-contaminated soil of abandoned industrial site.

Activated carbon as catalyst for microwave-assisted wet peroxide oxidation of aromatic hydrocarbons

This paper addresses the removal of four aromatic hydrocarbons typically found in petrochemical wastewater: benzene (B), toluene (T), o-xylene (X), and naphthalene (N), by microwave-assisted catalytic wet peroxide oxidation (MW-CWPO) using activated carbon (AC) as catalyst. Under the studied conditions, complete pollutant elimination (B, 1.28 mM; T, 1.09 mM; X, 0.94 mM; and N, 0.78 mM) was achieved, with more than 90% TOC removal after only 15-min reaction time, working at 120 °C, pH₀ = 3, AC at 1 g L^-1, and H₂O₂ at the stoichiometric dose. Furthermore, in the case of toluene, naphthalene, and xylene, the hydroxylation and breakdown of the ring is very rapid and toxic intermediates were not detected. The process follows two steps: (i) pollutant adsorption onto AC followed by (ii) adsorbed compounds oxidation. Thus, MW-CWPO with AC as catalyst appears a promising way for a fast and effective process for B, T, X, and N removal in aqueous phase.

Reduced bioavailability and plant uptake of polycyclic aromatic hydrocarbons from soil slurry amended with biochars pyrolyzed under various temperatures

Biochar has high potential for organic pollutant immobilization due to its powerful sorption capacity. Nevertheless, potential risks may exist when biochar-sorbed organic pollutants are bioavailable. A direct plant exposure assay in combination with an organic solvent extraction experiment was carried out in this study to investigate the bioavailability of polycyclic aromatic hydrocarbons (PAHs) with the application of pine needle biochars pyrolyzed under different temperatures (100, 300, 400, and 700 °C; referred as P100-P700 accordingly). Biochar reduced solvent extractability and plant uptake of PAHs including naphthalene (Naph), acenaphthene (Acen), phenanthrene (Phen), and pyrene (Pyr), especially for three- and four-ring PAHs (Phen and Pyr) with high-temperature biochar. Plant uptake assay validates with organic solvent extraction for bioavailability assessment. Sorption of PAHs to biochars reduced plant uptake of PAHs in roots and shoots by lowering freely dissolved PAHs. Aging process reduced the bioavailability of PAHs that were bound to biochar. High pyrolysis temperature can be recommended for biochar preparation for purpose of effectively immobilizing PAHs, whereas application of moderate-temperature biochar for PAH immobilization should concern the potential risks of desorption and bioavailability of PAHs.

Surfactant-enhanced remediation of polycyclic aromatic hydrocarbons: A review

Polycyclic aromatic hydrocarbons (PAHs) are toxic, mutagenic and carcinogenic organic compounds that are widely present in the environment. The bioremediation of PAHs is an economical and environmentally friendly remediation technique, but it is limited because PAHs have low water solubility and fewer bioavailable properties. The solubility and bioavailability of PAHs can be increased by using surfactants to reduce surface tension and interfacial tension; this method is called surfactant-enhanced remediation (SER). The SER of PAHs is influenced by many factors such as the type and concentration of surfactants, PAH hydrophobicity, temperature, pH, salinity, dissolved organic matter and microbial community. Furthermore, as mixed micelles have a synergistic effect on PAH solubilisation, selecting the optimum ratio of mixed surfactants leads to effective PAH remediation. Although the use of surfactants inhibits microbial activities in some cases, this could be avoided by choosing an optimum combination of surfactants and a proper microbial community for the targeted PAH(s), resulting in up to 99.99% PAH removal. This article reviews the literature on SER of PAHs, including surfactant types, the synergistic effect of mixed micelles on PAH removal, the impact of surfactants on the PAH biodegradation process, factors affecting the SER process, and the mechanisms of surfactant-enhanced solubilisation of PAHs.