g-C3N4-promoted degradation of ofloxacin antibiotic in natural waters under simulated sunlight

Current advances on the photocatalytic degradation of fluoroquinolones: photoreaction mechanism and environmental application

Heterogeneous photocatalysis is one of the most studied and promising techniques for degradation of contaminants of emerging concern, especially pharmaceuticals, and it represents a potential application in wastewater treatment of recalcitrant pollutants, such as fluoroquinolones, which are almost not abated by standard WWTPs. Although photodegradation partially contributes to alleviate their accumulation into the aquatic systems, heterogeneous photocatalysis assures complete sequestration and mineralization of FQs and their photoproducts and offers many advantages with respect to the other advanced oxidation processes (AOPs). The present brief review summarizes the most recent studies regarding the development and application of novel photocatalytic materials to the removal of FQs from contaminated waters. The collected data are arranged relating the mechanistic aspects to specific catalysts' properties, such as adsorption capacity, easy recovery, and reusability, especially under actual conditions.

Tungsten Catalysts for Visible Light Driven Ofloxacin Photocatalytic Degradation and Hydrogen Production

Some tungsten catalysts of interest that are synthesized are bismuth tungstate (BT) and Tetrabutylammonium decatungstate (TBADT), using two consolidated procedures. BT is used as a photo-catalyst for the simulated solar light degradation of ofloxacin (OFL) antibiotic under relevant real conditions (µg L−1, fresh water) with the limit of 0.05 g L−1 of catalyst. A quantitative drug decomposition occurred following a bi-exponential first-order law, with an efficiency comparable with the most used P25 TiO2 catalyst. The photocatalytic profiles of OFL at µg L−1 and mg L−1 were monitored by high-pressure liquid chromatography (HPLC) coupled with fluorescence (FD) and ultraviolet (UV) detectors. Additionally, the main photoproducts were identified by high-pressure liquid chromatography coupled to electrospray ionization in tandem with mass spectrometry (HPLC-ESI-MS/MS). The catalyst Tetrabutylammonium decatungstate (TBADT) was used as a catalyst to produce hydrogen from glucose and 2-propanol in aqueous solution, providing hydrogen gas evolution up to 10 µmol g−1 h−1.

Graphitic Carbon Nitride as a Sustainable Photocatalyst Material for Pollutants Removal. State-of-the Art, Preliminary Tests and Application Perspectives

Photocatalysis is an attractive strategy for emerging pollutants remediation. Research towards the development of new, efficient and effective catalytic materials with high activity under wide irradiation spectra is a highly active sector in material science. Various semiconductor materials have been employed as photocatalysts, including TiO2, SrTiO3, CdS, BiVO4, Ta3N5, TaON, Ag3PO4, and g-C3N4. The latter is a metal-free, low cost polymer, providing high adsorption and catalytic properties, shown to be promising for photocatalysis applications under visible light. Furthermore, g-C3N4 composites are among the most promising advanced photocatalytical materials that can be produced by green synthesis processes. In this paper, the state-of-the-art of g-C3N4 applications is reviewed, and application perspectives are discussed. Photocatalysis tests with g-C3N4 under Xenon irradiation were performed to gather first-hand information to improve photoreactor design. Xenon light spectrum appears to be a suitable radiation source to replace direct sunlight in engineered pollutants removal processes catalyzed by g-C3N4, in lieu of other currently used heterogeneous photocatalysis processes (e.g., TiO2-UV). LED sources are also very promising due to higher energy efficiency and customizable, catalyzer-specific irradiation spectra.

Antibiotics: An overview on the environmental occurrence, toxicity, degradation, and removal methods

Antibiotics, as antimicrobial drugs, have been widely applied as human and veterinary medicines. Recently, many antibiotics have been detected in the environments due to their mass production, widespread use, but a lack of adequate treatment processes. The environmental occurrence of antibiotics has received worldwide attention due to their potential harm to the ecosystem and human health. Research status of antibiotics in the environment field is presented by bibliometrics. Herein, we provided a comprehensive overview on the following important issues: (1) occurrence of antibiotics in different environmental compartments, such as wastewater, surface water, and soil; (2) toxicity of antibiotics toward non-target organisms, including aquatic and terrestrial organisms; (3) current treatment technologies for the degradation and removal of antibiotics, including adsorption, hydrolysis, photodegradation and oxidation, and biodegradation. It was found that macrolides, fluoroquinolones, tetracyclines, and sulfonamides were most frequently detected in the environment. Compared to surface and groundwaters, wastewater contained a high concentration of antibiotic residues. Both antibiotics and their metabolites exhibited toxicity to non-target organisms, especially aquatic organisms (e.g., algae and fish). Fluoroquinolones, tetracyclines, and sulfonamides can be removed through abiotic process, such as adsorption, photodegradation, and oxidation. Fluoroquinolones and sulfonamides can directly undergo biodegradation. Further studies on the chronic effects of antibiotics at environmentally relevant concentrations on the ecosystem were urgently needed to fully understand the hazards of antibiotics and help the government to establish the permissible limits. Biodegradation is a promising technology; it has numerous advantages such as cost-effectiveness and environmental friendliness.

Analysis of Photocatalytic Degradation of Phenol with Exfoliated Graphitic Carbon Nitride and Light-Emitting Diodes Using Response Surface Methodology

Response surface methodology (RSM) involving a Box–Benkhen design (BBD) was employed to analyze the photocatalytic degradation of phenol using exfoliated graphitic carbon nitride (g-C3N4) and light-emitting diodes (wavelength = 430 nm). The interaction between three parameters, namely, catalyst concentration (0.25–0.75 g/L), pollutant concentration (20–100 ppm), and pH of the solution (3–10), was examined and modeled. An empirical regression quadratic model was developed to relate the phenol degradation efficiency with these three parameters. Analysis of variance (ANOVA) was then applied to examine the significance of the model; this showed that the model is significant with an insignificant lack of fit and an R2 of 0.96. The statistical analysis demonstrated that, in the studied range, phenol concentration considerably affected phenol degradation. The RSM model shows a significant correlation between predicted and experimental values of photocatalytic degradation of phenol. The model’s accuracy was tested for 50 ppm of phenol under optimal conditions involving a catalyst concentration of 0.4 g/L catalysts and a solution pH of 6.5. The model predicted a degradation efficiency of 88.62%, whereas the experimentally achieved efficiency was 83.75%.

Degradation of ofloxacin by a manganese-oxidizing bacterium Pseudomonas sp. F2 and its biogenic manganese oxides

Fluoroquinolone antibiotics like ofloxacin (OFL) have been frequently detected in the aquatic environment. Recently manganese-oxidizing bacteria (MOB) have attracted research efforts on the degradation of recalcitrant pollutants with the aid of their biogenic manganese oxides (BioMnOx). Herein, the degradation of OFL with a strain of MOB (Pseudomonas sp. F2) was investigated for the first time. It was found that the bacteria can degrade up to 100% of 5 μg/L OFL. BioMnOx and Mn(III) intermediates significantly contributed to the degradation. Moreover, the degradation was clearly declined when the microbial activity was inactivated by heat or ethanol, indicating the importance of bioactivity. Possible transformation products of OFL were identified by HPLC-MS and the degradation pathway was proposed. In addition, the toxicity of OFL was reduced by 66% after the degradation.

Comparison of Graphitic Carbon Nitrides Synthetized from Melamine and Melamine-Cyanurate Complex: Characterization and Photocatalytic Decomposition of Ofloxacin and Ampicillin

Graphitic carbon nitride (g-C₃N₄, hereafter abbreviated as CN) was prepared by the heating of melamine (CN-M) and melamine-cyanurate complex (CN-MCA), respectively, in air at 550 °C for 4 h. The specific surface area (SSA) of CN-M and CN-MCA was 12 m² g⁻¹ and 225 m²g⁻¹ and the content of oxygen was 0.62 wt.% and 1.88 wt.%, respectively. The band gap energy (E_g) of CN-M was 2.64 eV and E_g of CN-MCA was 2.73 eV. The photocatalytic activity of the CN materials was tested by means of the decomposition of antibiotics ofloxacin and ampicillin under LED irradiation of 420 nm. The activity of CN-MCA was higher due to its high SSA, which was determined based on the physisorption of nitrogen. Ofloxacin was decomposed more efficiently than ampicillin in the presence of both photocatalysts.

Enhancement of Cr(VI) removal efficiency via adsorption/photocatalysis synergy using electrospun chitosan/g-C3N4/TiO2 nanofibers

Chitosan/g-C₃N₄/TiO₂ (CS/CNT) nanofibers were fabricated by electrospinning technique for Cr(VI) removal through the adsorption and photocatalytic processes. The effects of crucial factors in the adsorption process including contact time (0-1440 min), pH (1-7), initial concentration of Cr(VI) (20-800 mg/L) were investigated. The photocatalytic experiment was executed in a photochemical reactor with an 800 W xenon lamp to simulate visible light. In adsorption process, at pH = 2, the adsorption capacities of chitosan (CS) nanofibers, CS/CNT_10:1 (CS : g-C₃N₄/TiO₂ = 10:1) nanofibers and CS/CNT_5:1 nanofibers were 20.8, 165.3 and 68.9 mg/g, respectively, suggesting the addition of g-C₃N₄/TiO₂ (CNT) could notably enhance the acid resistance of CS and widen its practical application. Under visible-light irradiation, the removal efficiency of Cr(VI) using CS/CNT nanofibers was appreciably improved, which was about 50 % higher than that of pure adsorption, indicating that the CS/CNT nanofibers exhibited the effective synergistic effect of adsorption and photocatalysis.

Water Depollution and Photo-Detoxification by Means of TiO2: Fluoroquinolone Antibiotics as a Case Study

Photocatalysis by semiconductors is considered one of the most promising advanced oxidation processes (AOPs) and TiO2 is the most well-studied material for the removal of contaminants from the aquatic system. Over the last 20 years, pharmaceuticals have been the most investigated pollutants. They re-enter the environment almost unmodified or slightly metabolized, especially in the aquatic environment, since the traditional urban wastewater treatment plants (WWTPs) are not able to abate them. Due to their continuous input, persistence in the environment, and unpleasant effects even at low concentrations, drugs are considered contaminants of emerging concern (ECs). Among these, we chose fluoroquinolone (FQ) antibiotics as an environmental probe for assessing the role of TiO2 photocatalysis in the degradation of recalcitrant pollutants under environmental conditions and detoxification of surface waters and wastewaters. Due to their widespread diffusion, their presence in the list of the most persistent pollutants, and because they have been deeply investigated and their multiform photochemistry is well-known, they are able to supply rich information, both chemical and toxicological, on all key steps of the oxidative degradation process. The present review article explores, in a non-exhaustive way, the relationship among pollution, toxicity and remediation through titanium dioxide photocatalysis, with particular attention to the toxicological aspect. By using FQs as the probe, in depth indications about the different phases of the process were obtained, and the results reported in this paper may be useful in the improvement of large-scale applications of this technology, and—through generally valid methods—they could be deployed to other pharmaceuticals and emerging recalcitrant contaminants.

TiO2 and N-TiO2 Sepiolite and Zeolite Composites for Photocatalytic Removal of Ofloxacin from Polluted Water

TiO₂ sepiolite and zeolite composites, as well the corresponding N-doped composites, synthesized through a sol–gel method, were tested for the photocatalytic degradation of a widespread fluoroquinolone antibiotic (ofloxacin) under environmental conditions. The catalysts were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS) analyses. A complete drug degradation occurred in 10–15 min in the presence of both TiO₂ sepiolite and zeolite catalysts, and in 20–30 min with the N-doped ones. Sepiolite proved to be a better TiO₂ support compared to the most common zeolite both in terms of adsorption capacity and photocatalytic efficiency in pollutants degradation. The influence of nitrogen doping (red shift from 3.2 to 3.0 eV) was also investigated. Although it was blurred by a marked increase of the particle dimension and thus a decrease of the specific surface area of the doped catalysts, it allowed a faster drug removal than direct photolysis. The photochemical paths and photoproducts were investigated, too.

Photodegradation of fluazaindolizine in aqueous solution with graphitic carbon nitride nanosheets under simulated sunlight illumination

The photodegradation of fluazaindolizine (FZDL) under simulated sunlight irradiation was accelerated by the catalysis of graphitic carbon nitride (g-C₃N₄). Under optimum conditions, such as 5 mg of amount and dispersion, the photodegradation half-life was dramatically enhanced to 2.7 h. More importantly, the pathway of degradation by g-C₃N₄ was different from both direct photolysis and the catalysis by titanium oxide, with particular negative ions of m/z 221 and 195, corresponding to the cleavage of sulfamide bond and the ring opening of imidazole, respectively. In addition, hydroxyl and superoxide radicals played important roles in photodegradation. The results enriched not only the study of FZDL photodegradation but also the application of g-C₃N₄. It also suggested the possibility of the water purification by photodegradation for pesticide removal in real life.