In situ remediation of tetrachloroethylene and its intermediates in groundwater using an anaerobic/aerobic permeable reactive barrier

Controlled-Release Materials for Remediation of Trichloroethylene Contamination in Groundwater

Groundwater contamination by trichloroethylene (TCE) presents a pressing environmental challenge with far-reaching consequences. Traditional remediation methods have shown limitations in effectively addressing TCE contamination. This study reviews the limitations of conventional remediation techniques and investigates the application of oxidant-based controlled-release materials, including encapsulated, loaded, and gel-based potassium permanganate since the year 2000. Additionally, it examines reductant controlled-release materials and electron donor-release materials such as tetrabutyl orthosilicate (TBOS) and polyhydroxybutyrate (PHB). The findings suggest that controlled-release materials offer a promising avenue for enhancing TCE degradation and promoting groundwater restoration. This study concludes by highlighting the future research directions and the potential of controlled-release materials in addressing TCE contamination challenges.

A new insight into the influencing factors of natural attenuation of chlorinated hydrocarbons contaminated groundwater: A long-term field study of a retired pesticide site

Natural attenuation of contaminants has been increasingly applied as a strategy to manage the retired pesticide manufacturing sites due to the increasing restrictions on the reuse of contaminated sites in China. However, the influencing factors to enhance natural attenuation for chlorinated hydrocarbons in retired pesticide sites were not well studied. In this paper, monitoring of pollutants, environmental factors and microbial community was conducted from 2016 to 2021 in a retired pesticide site in Jiangsu Province undergoing natural attenuation, where the groundwater was severely contaminated with chlorinated hydrocarbons. The spatial variation of main pollutants, including chlorinated ethenes and ethanes, indicated that the site could be divided into the source area, diffusion area, and the end of diffusion area, where organohalide-respiring bacteria (OHRB) were detected. Pollutants and environmental factors influenced the OHRB community structure, which explained 7.6% and 33.2% of the variation, respectively. The abundances of obligate and facultative OHRB were affected in opposite ways by pollutants and environmental factors. Dehalococcoides and Dehalogenimonas in obligate OHRB were significantly inhibited by sulfate (r = -0.448, p < 0.05). The spatial-temporal characteristics of pollutants and the reveal of microbial community structure and its restricting factors in different areas make the foundation for strengthening the implementation of natural attenuation.

Development and microbial characterization of Bio-RD-PAOP for effective remediation of polychlorinated biphenyls

Polychlorinated biphenyls (PCBs) as typical halogenated persistent organic pollutants are widely distributed in natural environments, and can be enriched and magnified in organisms via food webs. It is consequently urgent and necessary to develop techniques to completely remove these persistent organohalides. In this study, we developed a process (Bio-RD-PAOP) by integrating microbial reductive dechlorination (Bio-RD) with subsequent persulfate activation and oxidation process (PAOP) for effective remediation of PCBs. Results showed the synergistic combination of advantages of Bio-RD and PAOP in dechlorination of higher-chlorinated PCBs and of PAOP in degradation/mineralization of lower-chlorinated PCBs, respectively. For the PAOP, both experimental evidences and theoretical calculations suggested that degradation rate and efficiency decreased with the increased PCB chlorine numbers. Relative to the Bio-RD and PAOP, Bio-RD-PAOP had significantly higher PCB removal efficiencies, of which values were PCB congener-specific. For example, removal efficiency of Bio-RD-PAOP in removing PCB88 is 2.50 and 1.86 times of that of Bio-RD and PAOP, respectively. In contrast, the efficiency is 1.66 and 3.35 times of Bio-RD and PAOP, respectively, for PCB180 removal. The PAOP-derived oxidizing species (mainly sulfate free radical) significantly decreased microbial abundance, particularly of the organohalide-respiring Dehalococcoides. Notably, co-existence of other microorganisms alleviated the inhibitive effect of oxidizing species on the Dehalococcoides, possibly due to formation of microbial flocs or biofilm. This study provided a promising strategy for extensive remediation of organohalide-contaminated sites, as well as new insight into impact of PAOP-derived oxidizing species on the organohalide-respiring community.

Water Purification of Classical and Emerging Organic Pollutants: An Extensive Review

The main techniques used for organic pollutant removal from water are adsorption, reductive and oxidative processes, phytoremediation, bioremediation, separation by membranes and liquid–liquid extraction. In this review, strengths and weaknesses of the different purification techniques are discussed, with particular attention to the newest results published in the scientific literature. This study highlighted that adsorption is the most frequently used method for water purification, since it can balance high organic pollutants removal efficiency, it has the possibility to treat a large quantity of water in semi-continuous way and has acceptable costs.

Application of γ-PGA as the primary carbon source to bioremediate a TCE-polluted aquifer: A pilot-scale study

The effectiveness of using gamma poly-glutamic acid (γ-PGA) as the primary carbon and nitrogen sources to bioremediate trichloroethene (TCE)-contaminated groundwater was studied in this pilot-scale study. γ-PGA (40 L) solution was injected into the aquifer via the injection well (IW) for substrate supplement. Groundwater samples were collected from monitor wells and IW and analyzed for TCE and its byproducts, geochemical indicators, dechlorinating bacteria, and microbial diversity periodically. Injected γ-PGA resulted in an increase in total organic carbon (TOC) (up to 9820 mg/L in IW), and the TOC biodegradation caused the formation of anaerobic conditions. Increased ammonia concentration (because of amine release from γ-PGA) resulted in the neutral condition in groundwater, which benefited the growth of Dehalococcoides. The negative zeta potential and micro-scale diameter of γ-PGA allowed its globule to distribute evenly within soil pores. Up to 93% of TCE removal was observed (TCE dropped from 0.14 to 0.01 mg/L) after 59 days of γ-PGA injection, and TCE dechlorination byproducts were also biodegraded subsequently. Next generation sequence (NGS) analyses were applied to determine the dominant bacterial communities. γ-PGA supplement developed reductive dechlorinating conditions and caused variations in microbial diversity and dominant bacterial species. The dominant four groups of bacterial communities including dechlorinating bacteria, vinyl chloride degrading bacteria, hydrogen producing bacteria, and carbon biodegrading bacteria.

Application of magnesium peroxide (MgO2) nanoparticles for toluene remediation from groundwater: batch and column studies

In the present study, magnesium peroxide (MgO₂) nanoparticles were synthesized by electro-deposition process and characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The batch experiments were conducted to evaluate the MgO₂ half-life (600 mg/L) in groundwater under various temperatures (4, 15, and 30 °C) and initial pH (3, 7, and 12). The effect of Fe²⁺ ions (enhanced oxidation) on the toluene remediation by MgO₂ was also investigated. Nanoparticles were injected to sand-packed continuous-flow columns, and toluene removal (50 ppm) was studied within 50 days at 15 °C. The results indicated that the half-life of MgO₂ at pH 3 and 12 were 5 and 15 days, respectively, in comparison to 10 days at the initial pH 7 and 15 °C. The nanoparticles showed 20 and 7.5 days half-life at 4 and 30 °C temperatures, respectively. Injection of Fe²⁺ ions indicated an impressive effect on toluene removal by MgO₂, and the contaminant was completely removed after 5 and 10 days, in the batch and column experiments, respectively. Confocal laser scanning microscope (CLSM) analysis indicated that the attached biofilm had a significant role in the decontamination of groundwater. Comparison of bioremediation and enhanced oxidation resulted in a considerable insight into the application of magnesium peroxide in groundwater remediation. Graphical abstract ᅟ.