Synthesis of Co3O4-Bi2O3 using microwave-assisted method as the peroxymonosulfate activator for elimination of bisphenol A

Antibiotics degradation by advanced oxidation process (AOPs): Recent advances in ecotoxicity and antibiotic-resistance genes induction of degradation products

Antibiotic contamination could cause serious risks of ecotoxicity and resistance gene induction. Advanced oxidation processes (AOPs) such as Fenton, photocatalysis, activated persulfate, electrochemistry and other AOPs technologies have been proven effective in the degradation of high-risk, refractory organic pollutants such as antibiotics. However, due to the limited mineralization ability, a large number of degradation intermediates will be produced in the oxidation process. The residual or undiscovered ecological risks of degradation products are potential safety hazards and problems necessitating comprehensive studies. In-depth investigations especially on the full assessments of ecotoxicity and resistance genes induction capability of antibiotic degradation products are important issues in reducing the environmental problems of antibiotics. Therefore, this review presents an overview of the current knowledge on the efficiency of different AOPs systems in reducing antibiotics toxicity and antibiotic resistance.

High microwave responsivity Co-Bi25FeO40 in synergistic activation of peroxydisulfate for high efficiency pollutants degradation and disinfection: Mechanism of enhanced electron transfer

Cobalt doped Bi₂₅FeO₄₀ was used as a heterogeneous catalyst in microwave (MW) co-activation of peroxydisulfate (PDS) system for organic contaminant purification and disinfection simultaneously. Due to low charge-transfer resistance and fast electron migration, Co-Bi₂₅FeO₄₀ showed superior catalytic efficiencies for activation PDS to degrade over 92.0% of bisphenol A (BPA) with the initial concentrations ranging from 40 mg/L to 120 mg/L in 5.0 min. The non-radical oxidation pathway via electron transfer regime on the surface of Co-Bi₂₅FeO₄₀ was the dominant reactive species in the reaction system. Benefit from the energy transfer and cross-coupling reactions of microwave, the Co-Bi₂₅FeO₄₀/MW/PDS system can generate abundant reactive sites to facilitate the formation of more surface-bonding complexes. Microwave energy can be absorbed by Co-Bi₂₅FeO₄₀ catalysts to promote activation of PDS and production of nanobubbles. The generated nanobubbles increase the temperature of the local solution to promote the reaction. The Co-Bi₂₅FeO₄₀/MW/PDS system also exhibited excellent bactericidal capability for Escherichia coli (E.coli). The catalysts, oxidants and microwaves acted on E. coli to form physical, and oxidative pressure simultaneously, causing cell damaged and made bacterial death. This work provides prospects toward high-efficiency integration of contaminant purification and pathogenic microorganisms inactivation.

Multi-walled carbon nanotubes-CoFe2 O4 nanoparticles as a reusable novel peroxymonosulfate activator for degradation of Reactive Black 5

In this study, CoFe₂ O₄ nanoparticles supported on multi-walled carbon nanotubes (MWCNTs), as novel peroxymonosulfate (PMS) activator, were synthesized for degradation of Reactive Black 5 (RB5). The results showed that the maximum removal efficiencies of RB5 (100%), chemical oxygen demand (83.12%), and total organic carbon (65.5%) could happen at pH of 7, catalyst dosage of 100 mg/L, PMS dosage of 2 mM, RB5 concentration of 50 mg/L, and time of 30 min. The results of the temperature effect showed that the activation energy (E_a  = 20.92 kJ/mol) for the synthesized catalyst is much lower compared to other studies. The PMS/MWCNTs-CoFe₂ O₄ system had higher decolorization efficiency and kinetic rates compared to other adsorption and oxidation systems. Quenching experiments proved that RB5 was degraded by sulfate and hydroxyl radicals. The MWCNTs-CoFe₂ O₄ catalyst showed suitable stability and reusability even after five consecutive catalytic reactions. The continuous treatment of RB5 in real water resources was performed using catalyst packed in a column reactor, and its results showed the high efficiency of the column in the catalytic treatment of the dye at long reaction time. Based on the proposed degradation pathway, the azo bands and the naphthalene structure of RB5 are oxidized to compounds with low molecular weight. PRACTITIONER POINTS: MWCNTs-CoFe₂ O₄ was used as a novel recyclable catalyst for the activation of peroxymonosulfate and dye degradation. The rate of dye degradation and peroxymonosulfate activation by MWCNTs-CoFe₂ O₄ was much higher than that of the catalysts alone. Radical SO 4 · - , with contribution percentage of 73.20%, was the main agent for degradation of Reactive Black 5 dye. MWCNTs-CoFe₂ O₄ in the dye degradation process showed excellent stability and reusability, lower activation energy, and easier separation. The dye degradation products were identified by gas chromatography and UV-vis spectrophotometric analyses, and their degradation pathway was suggested.

The application of microwaves in sulfate radical-based advanced oxidation processes for environmental remediation: A review

The generation of sulfate radicals is a key factor to limit the catalytic activities of sulfate radical-based advanced oxidation processes (SR-AOPs). Microwave irradiation is a specific method to heat solutions via thermal and nonthermal effects, and has attracted an increasing amount of attention in recent years. Herein, we focus on the application of microwaves in SR-AOPs that called SR-MAOPs in environmental remediation, including wastewater, landfill leachate, biological waste sludge and soil, etc. treatment. Various systems including homogeneous and heterogeneous SR-MAOPs were reviewed. In wastewater treatment, not only the dyes and pharmaceutical and personal care products (PPCPs) were considered, the application in actual water matrices was also summarized. In addition, the function of remediation for organic-contaminated soil, landfill leachate and biological waste sludge were assessed using SR-MAOPs. In addition to evaluating the degradation efficiency of various organic pollutants from environment, the dewaterability is another key to treat biological waste sludge. The SR-MAOPs could break up hydrogen bonds and inactivate and denature complex biological molecules via microwave effects to achieve the dewatering of microorganisms in sludge. Furthermore, the COD of the sludge increased to a high level after microwave irradiation of sludge, which means that biopolymers released from microbial cells into the solution. Then, the released COD could be well treated by the SR-MAOPs. Based on the summary, we reveal that SR-MAOPs are potential technologies for environmental remediation, especially for systems with complicated organic compounds.

Application of nickel foam-supported Co3O4-Bi2O3 as a heterogeneous catalyst for BPA removal by peroxymonosulfate activation

Nickel foam (NF)-functionalized Co₃O₄-Bi₂O₃ nanoparticles (CBO@NF) synthesized using a facile one-step microwave-assistant method were employed as catalysts to activate peroxymonosulfate (PMS) with bisphenol A (BPA) as the target pollutant. The crystallinity, morphology, and chemical valence state of the synthesized CBO@NF were analyzed using XRD, SEM, and XPS, respectively. Moreover, effects of the preparation parameters, including the calcination temperature and calcination time as well as the loading dosage, were evaluated in detail. A degradation efficiency of 95.6% was achieved within 30 min with the optimal degradation system. The CBO@NF/PMS system shows great catalytic activity in a pH range from 3.0 to 11.0. The stability and reusability of the CBO@NF supported catalyst was evaluated through a recycling experiment. In addition, the possible degradation mechanism was also explored using a quenching experiment and electron paramagnetic resonance (EPR) detection. The result shows that both the surface-bound SO₄^- and OH play significant roles during the degradation process, where the electron transfer of Co²⁺/Co³⁺, Bi³⁺/Bi⁵⁺, and Ni²⁺/Ni³⁺ realizes the sustained regeneration of the active radicals. This work provides new insight for the practical applications of sulfate radical-based advanced oxidation processes (SR-AOPs) in wastewater treatment.

Optimization of the catalytic activity of a ZnCo2O4 catalyst in peroxymonosulfate activation for bisphenol A removal using response surface methodology

An effective peroxymonosulfate activator, ZnCo₂O₄, was synthesized through a microwave-assisted method. According to response surface methodology (RSM) using Box-Behnken design (BBD), the effects of four parameters, microwave temperature, microwave time, calcination time and calcination temperature, were investigated, and the results show that both the microwave temperature and calcination temperature have a great influence on the catalytic activity during the preparation process. In addition, a quadratic model is valid for computing and predicting the observed responses. The characteristics of the synthesized ZnCo₂O₄ catalyst were analyzed with various equipments. The results show that the ZnCo₂O₄ nanosheets are cubic crystals with a spinel structure and a high surface area of 105.90 m²‧g^-1. Under the conditions of [ZnCo₂O₄] = 0.2 g‧L^-1 and [PMS]/[BPA]_molar = 2.0, the bisphenol A degradation efficiency reaches 99.28% within 5 min in the ZnCo₂O₄/PMS system. ZnCo₂O₄ possesses great stability and reusability according to recycling experiments. In addition, the possible active radical species were confirmed through quenching experiments and EPR detection, indicating that surface-bound SO₄^- and OH play vital roles during the degradation process.