Adsorption and desorption characteristics of endosulfan in two typical agricultural soils in Southwest China

Acetamiprid retention in agricultural acid soils: Experimental data and prediction

The overuse of pesticides in agriculture has led to widespread pollution of soils and water resources, becoming a problem of great concern. Nowadays, special attention is given to neonicotinoids, particularly acetamiprid, the only neonicotinoid insecticide allowed for outdoor use in the European Union. Once acetamiprid reaches the soil, adsorption/desorption is the main process determining its bioavailability and environmental fate. Therefore, in this work, the adsorption/desorption behaviour of acetamiprid in 60 agricultural soils was studied. The results indicate that acetamiprid has a low affinity for soil constituents, with values ranging from 0.2 to 4.28 L kg-1 for Kd(ads). At the same time, acetamiprid shows high desorption levels (up to 96.3%), indicating that it is poorly retained in soils, thus presenting high bioavailability and a potential risk for transport to other environmental compartments. Regarding the influence of soil properties on the adsorption/desorption process, soils with a high content of organic matter, clay, and exchangeable basic cations showed higher retention of acetamiprid, with greater adsorption and lower desorption. Finally, robust and universal models were successfully developed to predict the adsorption and desorption behaviour of acetamiprid in soil.

Strategies for mitigation of pesticides from the environment through alternative approaches: A review of recent developments and future prospects

Chemical-based peticides are having negative impacts on both the healths of human beings and plants as well. The World Health Organisation (WHO), reported that each year, >25 million individuals in poor nations are having acute pesticide poisoning cases along with 20,000 fatal injuries at global level. Normally, only ∼0.1% of the pesticide reaches to the intended targets, and rest amount is expected to come into the food chain/environment for a longer period of time. Therefore, it is crucial to reduce the amounts of pesticides present in the soil. Physical or chemical treatments are either expensive or incapable to do so. Hence, pesticide detoxification can be achieved through bioremediation/biotechnologies, including nano-based methodologies, integrated approaches etc. These are relatively affordable, efficient and environmentally sound methods. Therefore, alternate strategies like as advanced biotechnological tools like as CRISPR Cas system, RNAi and genetic engineering for development of insects and pest resistant plants which are directly involved in the development of disease- and pest-resistant plants and indirectly reduce the use of pesticides. Omics tools and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation of pesticides also discussed from the literatures. Overall, the review focuses on the most recent advancements in bioremediation methods to lessen the effects of pesticides along with the role of microorganisms in pesticides elimination. Further, pesticide detection is also a big challenge which can be done by using HPLC, GC, SERS, and LSPR ELISA etc. which have also been described in this review.

Environmental fate and metabolic transformation of two non-ionic pesticides in soil: Effect of biochar, moisture, and soil sterilization

Soil moisture, organic matter, and soil microbes are the key considering factors that control the persistence, degradation, and transformation of applied pesticides under varied soil conditions. In this study, underlying influence of these factors was assessed through the fates and metabolic transformation of two non-ionic pesticides (e.g., Phorate and Terbufos) in soils. Concisely, two distinct experiments including a customized batch equilibrium (sorption study), and a lab incubation trial (degradation study) were performed, following the OECD guidelines. As per study findings, biochar (BC) amendment was found to be the most influential factors during sorption study, particularly, 1% BC amendment contributed to achieve the best results. In addition, the non-linearity of sorption isotherm (1/n < 1.0) was revealed through Freundlich isotherm, indicating the strong adsorption of studied pesticides onto the soils. On the other hand, during degradation study, soil moisture initiates the enhanced degradation of parent pesticides and subsequent metabolism. In the presence of 40% water holding capacity (WHC), 1% BC amendment enhances the metabolic transformation, while H2O2 treatment could hinder the process. Additionally, the half-life degradation (t1/2) of phorate and terbufos was controlled by biochar amendment, moisture, and soil sterilization, respectively. Finally, BC can accelerate the metabolic transformation, whereas, phorate underwent a metabolic change into sulfoxide and sulfone while terbufos turned into solely sulfoxide. This pioneering study gathered crucial data for understanding the persistence and metabolic transition of non-ionic pesticides in soils and their patterns of degradation.

Establishing the extent of pesticide contamination in Irish agricultural soils

To establish meaningful and sustainable policy directives for sustainable pesticide use in agriculture, baseline knowledge of pesticide levels in soils is required. To address this, five pesticides and one metabolite widely used in Irish agriculture and five neonicotinoid compounds pesticides were screened from soils from 25 fields. These sites represented a diversity of soil and land use types. Prothioconazole was detected in 16 of the 18 sites where it had been recently applied, with the highest maximum concentration quantified of 46 μg/kg. However, a week after application only four fields had prothioconazole concentrations above the limit of quantification (LOQ). Fluroxypyr was applied in 11 sites but was not detected above LOQ. Glyphosate and AMPA were not detected. Interestingly, neonicotinoids were detected in 96% of all sampling sites, even though they were not reported as recently applied. Excluding neonicotinoids, 60% of sites were found to contain pesticide residues of compounds that were not previously applied, with boscalid and azoxystrobin detected in 15 of the 25 sites sampled. The total number of pesticides detected in Irish soils were significantly negatively correlated with clay fraction, while average pesticide concentrations were significantly positively correlated with log Kow values. 17 fields were found to have total pesticide concentrations in excess of 0.5 μg/kg, even when recently applied pesticides were removed from calculations. Theoretical consideration of quantified pesticides determined that azoxystrobin has high leaching risk, while boscalid, which was detected but not applied, has an accumulation risk. This information provides insight into the current level of pesticide contamination in Irish agricultural soil and contributes to the European-level effort to understand potential impacts of pesticide contamination in soil.

Pesticide pestilence: Global scenario and recent advances in detection and degradation methods

Increased anthropogenic activities are confronted as the main cause for rising environmental and health concerns globally, presenting an indisputable threat to both environment and human well-being. Modern-day industrialization has given rise to a cascade of concurrent environmental and health challenges. The global human population is growing at an alarming rate, posing tremendous pressure on future food security, and healthy and environmentally sustainable diets for all. To feed all, the global food production needs to increase by 50% by 2050, but this increase has to occur from the limited arable land, and under the present-day climate variabilities. Pesticides have become an integral component of contemporary agricultural system, safeguarding crops from pests and diseases and their use must be reduce to fulfill the SDG (Sustainable Development Goals) agenda . However, their indiscriminate use, lengthy half-lives, and high persistence in soil and aquatic ecosystems have impacted global sustainability, overshot the planetary boundaries and damaged the pure sources of life with severe and negative impacts on environmental and human health. Here in this review, we have provided an overview of the background of pesticide use and pollution status and action strategies of top pesticide-using nations. Additionally, we have summarized biosensor-based methodologies for the rapid detection of pesticide residue. Finally, omics-based approaches and their role in pesticide mitigation and sustainable development have been discussed qualitatively. The main aim of this review is to provide the scientific facts for pesticide management and application and to provide a clean, green, and sustainable environment for future generations.

Adsorption of flupyradifurone onto soils: kinetics, isotherms, and influencing factors

The study of the adsorption properties of pesticides in soil is essential to assessing the risk of their pollution of nearby aquatic environments. To reveal the adsorption mechanisms of flupyradifurone (FPO) on soil, batch experiments in five different soils were carried out in this study. The adsorption kinetics and isotherms of FPO in five soils were well fitted by using several models (R² = 0.922-0.998). It was found that both physical and chemical adsorption were included in the adsorption process of FPO in soils; the monolayer adsorption of FPO occurred with a non-uniform energy distribution on the soil surface, and the internal particle diffusion was not the only rate-controlling step. The adsorption coefficients calculated by using the Langmuir (K_L) and Freundlich (K_F) models were 0.0158-0.0982 and 1.053-9.798, respectively. In addition, the main factors affecting the adsorption of FPO in soil were investigated by stepwise regression fitted with the adsorption coefficient (K_d) and the soil properties. It was found that the organic carbon content was the main factor (R² = 0.857, p < 0.05). Therefore, the organic carbon adsorption coefficients (K_oc) were calculated. The results (1.0532-5.6529) indicated that FPO has a low affinity and high mobility in the soils, and may cause water environment pollution around the soil. Therefore, FPO should be used cautiously in paddy fields. These research findings were important for elucidating the sorption behaviour and transport of FPO in soil.

Fate of endosulfan in ginseng farm and effect of granular biochar treatment on endosulfan accumulation in ginseng

Endosulfan was widely used as an insecticide in the agricultural sector before its environmental persistence was fully understood. Although its fate and transport in the environment have been studied, the effects of historic endosulfan residues in soil and its bioaccumulation in crops are not well understood. This knowledge gap was addressed by investigating the dissipation and bioaccumulation of endosulfan in ginseng as a perennial crop in fresh and aged endosulfan-contaminated fields. In addition, the effect of granular biochar (GBC) treatment on the bioaccumulation factor (BAF) of endosulfan residue in ginseng was assessed. The 50% dissipation time (DT₅₀) of the total endosulfan was over 770 days in both the fresh and aged soils under mulching conditions. This was at least twofold greater than the reported (6- > 200 days) in arable soil. Among the endosulfan congeners, the main contributor to the soil residue was endosulfan sulfate, as observed from 150 days after treatment. The BAF for the 2-year-old ginseng was similar in the fresh (1.682-2.055) and aged (1.372-2.570) soils, whereas the BAF for the 3-year-old ginseng in the aged soil (1.087-1.137) was lower than that in the fresh soil (1.771-2.387). The treatment with 0.3 wt% GBC extended the DT₅₀ of endosulfan in soil; however, this could successfully suppress endosulfan uptake, and reduced the BAFs by 66.5-67.7% in the freshly contaminated soil and 32.3-41.4% in the aged soil. Thus, this adsorbent treatment could be an effective, financially viable, and sustainable option to protect human health by reducing plant uptake of endosulfan from contaminated soils.

Simultaneous determination of pesticides from soils: a comparison between QuEChERS extraction and Dutch mini-Luke extraction methods

The expanding nature of the agricultural sector has fuelled the intensification of plant protection products usage, including pesticides. These pesticides may persist in soils, necessitating their accurate determination in a variety of soil types. However, due to their complex nature, the effective extraction of pesticide residues from soil matrices can present challenges to pesticide detection and quantification. This research compared two well-known extraction methods, QuEChERS and Dutch mini-Luke, by assessing their specificity, sensitivity, accuracy, precision and reproducibility in extracting seven distinct pesticides with a range of chemico-physical characteristics from Irish soils. The HPLC-UV conditions were optimised to separate the seven pesticides, and it was shown that both extraction methods successfully extracted neonicotinoids with recovery values ranging between 85 and 115%. Fluroxypyr and prothioconazole could not be efficiently extracted using QuEChERS, however, the recovery values of both the analytes ranged between 59 and 117% using Dutch mini-Luke. Furthermore, with the exception of prothioconazole using Dutch mini-Luke, both extraction methods resulted in reproducibility and precision values below or equal to 20%. Lastly, Dutch mini-Luke is noted to have a lower matrix effect than QuEChERS, except for prothioconazole. The comparison results showed that Dutch mini-Luke resulted in superior method sensitivity, better recovery, and lower matrix effect towards most investigated analytes and was the only extraction technique that successfully extracted all pesticides analysed in soil matrices.

Study on environmental behaviour of fluopyram in different banana planting soil

Fluopyram is commonly used to control banana leaf spot, anthracnose, and scab in tropical agricultural areas. To explore its behaviour in tropical agricultural environments, dissipation, adsorption, and leaching behaviours of fluopyram in three typical banana planting soils were studied. Also, its dissipation and migration capabilities in different regions and different soil types were evaluated. The results showed that the dissipation of fluopyram was in accordance with the first-order kinetic equation in the three banana soils, but the degradation rates were quite different. The degradation half-lives in the Hainan latosol, Yunnan sandy soil, and Fujian Plain alluvial soil were 46.21 days, 36.48 days and 57.76 days, respectively. Fluopyram also exhibited high adsorption and low leachability in the three soils. The Fujian Plain alluvial soil had the highest adsorption capacity for fluopyram, while fluopyram had the low leachability in the Yunnan sandy soil.

Preparation of multi-walled carbon nanotubes based magnetic multi-template molecularly imprinted polymer for the adsorption of phthalate esters in water samples

Taking the advantages of surface imprinting, multi-template imprinting and magnetic separation, a novel magnetic multi-template molecularly imprinted polymer (mag-MMIP@MWCNTs) was prepared by using MWCNTs as support material, Fe₃O₄ as magnetic core, and dimethyl phthalate (DMP), diethyl phthalate (DEP), and dibutyl phthalate (DBP) as template molecules. This composite was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and the Brunauer-Emmett-Teller (BET) analysis, and was used for the simultaneous adsorption of DMP, DEP, and DBP in aqueous solution. The effects of solution pH, contact time, PAEs initial concentration, temperature, adsorption selectivity, and reusability were investigated and discussed in detail. The results demonstrated that mag-MMIP@MWCNTs exhibited fast kinetics, good magnetic separation, and excellent selectivity for the adsorption of three phthalate esters (PAEs). The adsorption kinetics followed pseudo second-order kinetic model and the adsorption thermodynamics followed Langmuir isothermal model very well, and the maximum adsorption capacities (Q_max) of DMP, DEP, and DBP were obtained as 0.95, 1.38, and 7.09 mg g^-1, respectively. The Scatchard analysis revealed that the template-polymer system had a two-site binding behavior. The adsorption thermodynamic studies indicated that the adsorption processes were exothermic and spontaneous, and dominated by physical adsorption relying on hydrogen bond, hydrophobic interaction, and van der Waals force. Mag-MMIP@MWCNTs also showed good reproducibility and reusability for simultaneous adsorption of the three PAEs. The potential application of mag-MMIP@MWCNTs was proved by the removal of DMP, DEP, and DBP spiked in environmental water samples.

Agriculture Development, Pesticide Application and Its Impact on the Environment

Pesticides are indispensable in agricultural production. They have been used by farmers to control weeds and insects, and their remarkable increases in agricultural products have been reported. The increase in the world's population in the 20th century could not have been possible without a parallel increase in food production. About one-third of agricultural products are produced depending on the application of pesticides. Without the use of pesticides, there would be a 78% loss of fruit production, a 54% loss of vegetable production, and a 32% loss of cereal production. Therefore, pesticides play a critical role in reducing diseases and increasing crop yields worldwide. Thus, it is essential to discuss the agricultural development process; the historical perspective, types and specific uses of pesticides; and pesticide behavior, its contamination, and adverse effects on the natural environment. The review study indicates that agricultural development has a long history in many places around the world. The history of pesticide use can be divided into three periods of time. Pesticides are classified by different classification terms such as chemical classes, functional groups, modes of action, and toxicity. Pesticides are used to kill pests and control weeds using chemical ingredients; hence, they can also be toxic to other organisms, including birds, fish, beneficial insects, and non-target plants, as well as air, water, soil, and crops. Moreover, pesticide contamination moves away from the target plants, resulting in environmental pollution. Such chemical residues impact human health through environmental and food contamination. In addition, climate change-related factors also impact on pesticide application and result in increased pesticide usage and pesticide pollution. Therefore, this review will provide the scientific information necessary for pesticide application and management in the future.